| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 Nov 2015 16:20:49 -0700
From: Azael Avalos <coproscefalo@...il.com>
To: Darren Hart <dvhart@...radead.org>
Cc: "platform-driver-x86@...r.kernel.org"
<platform-driver-x86@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Fabian Koester <fabian.koester@...ngnow.com>
Subject: Re: [PATCH v2 1/2] toshiba_acpi: Add support for WWAN devices
Hi Darren,
2015-11-20 15:49 GMT-07:00 Darren Hart <dvhart@...radead.org>:
> On Thu, Nov 19, 2015 at 08:49:24AM -0700, Azael Avalos wrote:
>> Toshiba laptops with WWAN devices installed cannot use the device unless
>> it is attached and powered, similar to how Toshiba Bluetooth devices
>> work.
>>
>> This patch adds support to WWAN devices, introducing three functions,
>> one to query the overall status of the wireless devices (RFKill, WLAN,
>> BT, WWAN), the second queries WWAN support, and finally the third
>> (de)activates the device.
>>
>> Signed-off-by: Fabian Koester <fabian.koester@...ngnow.com>
>> Signed-off-by: Azael Avalos <coproscefalo@...il.com>
>
> Thanks Azael,
>
> A few comments on code flow and one bug I think below.
>
>> ---
>> drivers/platform/x86/toshiba_acpi.c | 92 +++++++++++++++++++++++++++++++++++++
>> 1 file changed, 92 insertions(+)
>>
>> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
>> index c013029..60d1ad9 100644
>> --- a/drivers/platform/x86/toshiba_acpi.c
>> +++ b/drivers/platform/x86/toshiba_acpi.c
>> @@ -114,6 +114,7 @@ MODULE_LICENSE("GPL");
>> #define HCI_VIDEO_OUT 0x001c
>> #define HCI_HOTKEY_EVENT 0x001e
>> #define HCI_LCD_BRIGHTNESS 0x002a
>> +#define HCI_WIRELESS 0x0056
>> #define HCI_ACCELEROMETER 0x006d
>> #define HCI_KBD_ILLUMINATION 0x0095
>> #define HCI_ECO_MODE 0x0097
>> @@ -148,6 +149,10 @@ MODULE_LICENSE("GPL");
>> #define SCI_KBD_MODE_ON 0x8
>> #define SCI_KBD_MODE_OFF 0x10
>> #define SCI_KBD_TIME_MAX 0x3c001a
>> +#define HCI_WIRELESS_STATUS 0x1
>> +#define HCI_WIRELESS_WWAN 0x3
>> +#define HCI_WIRELESS_WWAN_STATUS 0x2000
>> +#define HCI_WIRELESS_WWAN_POWER 0x4000
>> #define SCI_USB_CHARGE_MODE_MASK 0xff
>> #define SCI_USB_CHARGE_DISABLED 0x00
>> #define SCI_USB_CHARGE_ALTERNATE 0x09
>> @@ -197,12 +202,14 @@ struct toshiba_acpi_dev {
>> unsigned int kbd_function_keys_supported:1;
>> unsigned int panel_power_on_supported:1;
>> unsigned int usb_three_supported:1;
>> + unsigned int wwan_supported:1;
>> unsigned int sysfs_created:1;
>> unsigned int special_functions;
>>
>> bool kbd_led_registered;
>> bool illumination_led_registered;
>> bool eco_led_registered;
>> + bool killswitch;
>> };
>>
>> static struct toshiba_acpi_dev *toshiba_acpi;
>> @@ -1085,6 +1092,87 @@ static int toshiba_hotkey_event_type_get(struct toshiba_acpi_dev *dev,
>> return -EIO;
>> }
>>
>> +/* Wireless status (RFKill, WLAN, BT, WWAN) */
>> +static int toshiba_wireless_status(struct toshiba_acpi_dev *dev)
>> +{
>> + u32 in[TCI_WORDS] = { HCI_GET, HCI_WIRELESS, 0, 0, 0, 0 };
>> + u32 out[TCI_WORDS];
>> + acpi_status status;
>> +
>> + in[3] = HCI_WIRELESS_STATUS;
>> + status = tci_raw(dev, in, out);
>> + if (ACPI_FAILURE(status)) {
>> + pr_err("ACPI call to get Wireless status failed\n");
>> + } else if (out[0] == TOS_NOT_SUPPORTED) {
>> + return -ENODEV;
>> + } else if (out[0] == TOS_SUCCESS) {
>> + dev->killswitch =
>> + (out[2] & HCI_WIRELESS_STATUS) ? true : false;
>
> This should assign successfully without the need for the ternary operator. You
> can also then drop the extra newline. You can always use:
>
> !!(out[2] & HCI_WIRELESS_STATUS)
>
> To ensure a 1 or 0 assignment.
OK, will change on v3.
>
>> + return 0;
>> + }
>> +
>> + return -EIO;
>
> Also, we should be testing for error and do the expected path outside the if
> blocks.
>
>
> if (ACPI_FAILURE(status) {
> pr_err("ACPI call to get Wireless status failed\n");
> return -EIO;
> }
>
> if (out[0] == TOS_NOT_SUPPORTED)
> return -ENODEV;
>
> if (out[0] != TOS_SUCCESS)
> return -EIO;
>
> dev->killswitch = !!(out[2] & HCI_WIRELESS_STATUS);
>
> return 0;
>
OK, will change the functions to this style on v3.
>> +}
>> +
>> +/* WWAN */
>> +static void toshiba_wwan_available(struct toshiba_acpi_dev *dev)
>> +{
>> + u32 in[TCI_WORDS] = { HCI_GET, HCI_WIRELESS, 0, 0, 0, 0 };
>> + u32 out[TCI_WORDS];
>> + acpi_status status;
>> +
>> + dev->wwan_supported = 0;
>> +
>> + /*
>> + * WWAN support can be queried by setting the in[3] value to
>> + * HCI_WIRELESS_WWAN (0x03).
>> + *
>> + * If supported, out[0] contains TOS_SUCCESS and out[2] contains
>> + * HCI_WIRELESS_WWAN_STATUS (0x2000).
>> + *
>> + * If not supported, out[0] contains TOS_INPUT_DATA_ERROR (0x8300)
>> + * or TOS_NOT_SUPPORTED (0x8000).
>> + */
>> + in[3] = HCI_WIRELESS_WWAN;
>> + status = tci_raw(dev, in, out);
>> + if (ACPI_FAILURE(status))
>> + pr_err("ACPI call to get WWAN status failed\n");
>> + else if (out[0] == TOS_SUCCESS && out[2] == HCI_WIRELESS_WWAN_STATUS)
>> + dev->wwan_supported = 1;
>
> This block similarly intermixes error checking with the primary functional
> logic, making it less legible in my opinion. Consider:
>
>
> in[3] = HCI_WIRELESS_WWAN;
> status = tci_raw(dev, in, out);
>
> if (ACPI_FAILURE(status) || (out[0] != TOS_SUCCESS)) {
> pr_err("ACPI call to get WWAN status failed\n");
> return;
> }
>
> dev->wwan_supported = (out[2] == HCI_WIRELESS_WWAN_STATUS);
>
>> +}
>> +
>> +static int toshiba_wwan_set(struct toshiba_acpi_dev *dev, u32 state)
>> +{
>> + u32 in[TCI_WORDS] = { HCI_SET, HCI_WIRELESS, state, 0, 0, 0 };
>> + u32 out[TCI_WORDS];
>> + acpi_status status;
>> +
>> + in[3] = HCI_WIRELESS_WWAN_STATUS;
>> + status = tci_raw(dev, in, out);
>> + if (ACPI_FAILURE(status)) {
>> + pr_err("ACPI call to set WWAN status failed\n");
>> + return -EIO;
>> + } else if (out[0] == TOS_NOT_SUPPORTED) {
>> + return -ENODEV;
>> + } else if (out[0] != TOS_SUCCESS) {
>> + return -EIO;
>> + }
>> +
>> + /*
>> + * Some devices only need to call HCI_WIRELESS_WWAN_STATUS to
>> + * (de)activate the device, but some others need the
>> + * HCI_WIRELESS_WWAN_POWER call as well.
>> + */
>> + in[3] = HCI_WIRELESS_WWAN_POWER;
>> + status = tci_raw(dev, in, out);
>> + if (ACPI_FAILURE(status))
>> + pr_err("ACPI call to set WWAN power failed\n");
>
> I believe you want a return -EIO here?
>
Yes, and actually, I think the whole driver functions are like this,
I'll check once
I get back home and send a separate patch for this issue.
>> + else if (out[0] == TOS_NOT_SUPPORTED)
>> + return -ENODEV;
>> +
>> + return out[0] == TOS_SUCCESS ? 0 : -EIO;
>
> So much ternary! :-) I suppose this one is OK.
Alright, once I get back home I'll update these patches according
to your comments and send a v3.
Cheers
Azael
--
-- El mundo apesta y vosotros apestais tambien --
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists