lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Sat, 21 Nov 2015 17:32:54 +0100
From:	Christoph Anton Mitterer <calestyo@...entia.net>
To:	LKML <linux-kernel@...r.kernel.org>
Subject: USB ExpressCard makes kworker process utilise 72% CPU infinitely

Hey.

I bough a USB3.0 ExpressCard from StarTech[0] which is apparently[1]
based on the NEC uPD720200.

Using a kernel 4.2.6 on amd64, the System is Debian sid, the following
happens when I plug the card:

kernel logs show:
Nov 21 17:15:22 heisenberg kernel: [  102.387452] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
Nov 21 17:15:22 heisenberg kernel: [  102.387545] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
Nov 21 17:15:22 heisenberg kernel: [  102.387723] pci 0000:01:00.0: PME# supported from D0 D3hot
Nov 21 17:15:22 heisenberg kernel: [  102.394689] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0d00000-0xf0d01fff 64bit]
Nov 21 17:15:22 heisenberg kernel: [  102.394750] pci 0000:01:00.0: enabling device (0000 -> 0002)
Nov 21 17:15:22 heisenberg kernel: [  102.395178] xhci_hcd 0000:01:00.0: xHCI Host Controller
Nov 21 17:15:22 heisenberg kernel: [  102.395192] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 5
Nov 21 17:15:22 heisenberg kernel: [  102.395418] xhci_hcd 0000:01:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
Nov 21 17:15:22 heisenberg kernel: [  102.395892] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Nov 21 17:15:22 heisenberg kernel: [  102.395896] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 21 17:15:22 heisenberg kernel: [  102.395899] usb usb5: Product: xHCI Host Controller
Nov 21 17:15:22 heisenberg kernel: [  102.395902] usb usb5: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
Nov 21 17:15:22 heisenberg kernel: [  102.395905] usb usb5: SerialNumber: 0000:01:00.0
Nov 21 17:15:22 heisenberg kernel: [  102.396308] hub 5-0:1.0: USB hub found
Nov 21 17:15:22 heisenberg kernel: [  102.396331] hub 5-0:1.0: 2 ports detected
Nov 21 17:15:22 heisenberg kernel: [  102.396591] xhci_hcd 0000:01:00.0: xHCI Host Controller
Nov 21 17:15:22 heisenberg kernel: [  102.396599] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
Nov 21 17:15:22 heisenberg kernel: [  102.398835] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
Nov 21 17:15:22 heisenberg kernel: [  102.398883] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Nov 21 17:15:22 heisenberg kernel: [  102.398887] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 21 17:15:22 heisenberg kernel: [  102.398890] usb usb6: Product: xHCI Host Controller
Nov 21 17:15:22 heisenberg kernel: [  102.398892] usb usb6: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
Nov 21 17:15:22 heisenberg kernel: [  102.398895] usb usb6: SerialNumber: 0000:01:00.0
Nov 21 17:15:22 heisenberg kernel: [  102.399272] hub 6-0:1.0: USB hub found
Nov 21 17:15:22 heisenberg kernel: [  102.399294] hub 6-0:1.0: 2 ports detected

and when removing:
Nov 21 17:15:40 heisenberg kernel: [  120.541515] xhci_hcd 0000:01:00.0: remove, state 4
Nov 21 17:15:40 heisenberg kernel: [  120.544671] usb usb6: USB disconnect, device number 1
Nov 21 17:15:40 heisenberg kernel: [  120.546683] xhci_hcd 0000:01:00.0: Host not halted after 16000 microseconds.
Nov 21 17:15:40 heisenberg kernel: [  120.547611] xhci_hcd 0000:01:00.0: USB bus 6 deregistered
Nov 21 17:15:40 heisenberg kernel: [  120.547618] xhci_hcd 0000:01:00.0: remove, state 4
Nov 21 17:15:40 heisenberg kernel: [  120.547622] usb usb5: USB disconnect, device number 1
Nov 21 17:15:40 heisenberg kernel: [  120.547735] xhci_hcd 0000:01:00.0: USB bus 5 deregistered


Now the problem is that immediately when I attach the card, a kworker
process starts to utilise the CPU to always around 72%.
And it never stops again until I shutdown; removing the card doesn't
help.


Any ideas?

Thanks,
Chris.


[0] http://www.startech.com/Cards-Adapters/USB-3.0/Cards/2-Port-Flush-Mount-USB-3-ExpressCard-Adapter~ECUSB3S254F
[1] http://sgcdn.startech.com/005329/media/sets/ECUSB3S254F_Manual/ECUSB3S254F.pdf
Download attachment "smime.p7s" of type "application/x-pkcs7-signature" (5313 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ