| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 24 Nov 2015 14:36:42 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Simon Arlott <simon@...e.lp0.eu>,
MIPS Mailing List <linux-mips@...ux-mips.org>
CC: Jonas Gorski <jogo@...nwrt.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
Kevin Cernekee <cernekee@...il.com>,
Wim Van Sebroeck <wim@...ana.be>,
Miguel Gaio <miguel.gaio@...xo.com>,
Maxime Bizon <mbizon@...ebox.fr>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-watchdog@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: Re: [PATCH (v3) 2/10] MIPS: bmips: Add bcm6345-l2-timer interrupt
controller
On 24/11/15 14:10, Simon Arlott wrote:
> Add the BCM6345/BCM6318 timer as an interrupt controller so that it can be
> used by the watchdog to warn that its timer will expire soon.
>
> Support for clocksource/clockevents is not implemented as the timer
> interrupt is not per CPU (except on the BCM6318) and the MIPS clock is
> better. This could be added later if required without changing the device
> tree binding.
>
> Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
> ---
> Fixed the offset of the count registers, they were writing off by one which
> caused it to set the watchdog timeout to 0.
>
> drivers/irqchip/Kconfig | 5 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-bcm6345-l2-timer.c | 324 +++++++++++++++++++++++++++++++++
> 3 files changed, 330 insertions(+)
> create mode 100644 drivers/irqchip/irq-bcm6345-l2-timer.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index d307bb3..21c3d9b 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -70,6 +70,11 @@ config BCM6345_L1_IRQ
> select GENERIC_IRQ_CHIP
> select IRQ_DOMAIN
>
> +config BCM6345_L2_TIMER_IRQ
> + bool
> + select GENERIC_IRQ_CHIP
> + select IRQ_DOMAIN
> +
> config BCM7038_L1_IRQ
> bool
> select GENERIC_IRQ_CHIP
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index ded59cf..2687dea 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
> obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
> obj-$(CONFIG_SOC_VF610) += irq-vf610-mscm-ir.o
> obj-$(CONFIG_BCM6345_L1_IRQ) += irq-bcm6345-l1.o
> +obj-$(CONFIG_BCM6345_L2_TIMER_IRQ) += irq-bcm6345-l2-timer.o
> obj-$(CONFIG_BCM7038_L1_IRQ) += irq-bcm7038-l1.o
> obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
> obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
> diff --git a/drivers/irqchip/irq-bcm6345-l2-timer.c b/drivers/irqchip/irq-bcm6345-l2-timer.c
> new file mode 100644
> index 0000000..4e6f71b
> --- /dev/null
> +++ b/drivers/irqchip/irq-bcm6345-l2-timer.c
> @@ -0,0 +1,324 @@
> +/*
> + * Copyright 2015 Simon Arlott
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Based on arch/mips/bcm63xx/timer.c:
> + * Copyright (C) 2008 Maxime Bizon <mbizon@...ebox.fr>
> + *
> + * Registers for SoCs with 4 timers: BCM6345, BCM6328, BCM6362, BCM6816,
> + * BCM68220,BCM63168, BCM63268
> + * 0x02: IRQ enable (u8)
> + * 0x03: IRQ status (u8)
> + * 0x04: Timer 0 control
> + * 0x08: Timer 1 control
> + * 0x0c: Timer 2 control
> + * 0x10: Timer 0 count
> + * 0x14: Timer 1 count
> + * 0x18: Timer 2 count
> + * 0x1c+: Watchdog registers
> + *
> + * Registers for SoCs with 5 timers: BCM6318
> + * 0x00: IRQ enable (u32)
> + * 0x04: IRQ status (u32)
> + * 0x08: Timer 0 control
> + * 0x0c: Timer 1 control
> + * 0x10: Timer 2 control
> + * 0x14: Timer 3 control
> + * 0x18: Timer 0 count
> + * 0x1c: Timer 1 count
> + * 0x20: Timer 2 count
> + * 0x24: Timer 3 count
> + * 0x28+: Watchdog registers
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/bitops.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqreturn.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/string.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +
> +#define REG_6345_IRQ_ENABLE 0x02
> +#define REG_6345_IRQ_STATUS 0x03
> +#define REG_6345_CONTROL_BASE 0x04
> +#define REG_6345_COUNT_BASE 0x10
> +
> +#define REG_6318_IRQ_ENABLE 0x00
> +#define REG_6318_IRQ_STATUS 0x04
> +#define REG_6318_CONTROL_BASE 0x08
> +#define REG_6318_COUNT_BASE 0x18
> +
> +#define NR_TIMERS_6345 4
> +#define WDT_TIMER_ID_6345 (NR_TIMERS_6345 - 1)
> +
> +#define NR_TIMERS_6318 5
> +#define WDT_TIMER_ID_6318 (NR_TIMERS_6318 - 1)
> +
> +/* Per-timer count register */
> +#define COUNT_MASK (0x3fffffff)
> +
> +/* Per-timer control register */
> +#define CONTROL_COUNTDOWN_MASK (0x3fffffff)
> +#define CONTROL_RSTCNTCLR_MASK (1 << 30)
> +#define CONTROL_ENABLE_MASK (1 << 31)
> +
> +enum bcm6345_timer_type {
> + TIMER_TYPE_6345,
> + TIMER_TYPE_6318,
> +};
> +
> +struct bcm6345_timer {
> + raw_spinlock_t lock;
> + void __iomem *base;
> + unsigned int irq;
> + struct irq_domain *domain;
> +
> + enum bcm6345_timer_type type;
> + unsigned int nr_timers;
> + /* The watchdog timer has separate control/remaining registers
> + * and cannot be masked.
> + */
> + int wdt_timer_id;
> +};
> +
> +static inline u32 bcm6345_timer_read_int_status(struct bcm6345_timer *timer)
> +{
> + if (timer->type == TIMER_TYPE_6318)
> + return __raw_readl(timer->base + REG_6318_IRQ_STATUS);
> + else
> + return __raw_readb(timer->base + REG_6345_IRQ_STATUS);
This is really error prone and does not scale to adding a third type of
timer if we ever had to. How about using the same logic and construction
as the following drivers: drivers/spi/spi-bcm63xx.c,
drivers/bus/brcmstb_gisb.c?
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists