This patch is just the result of two substitutions. The first removes any tabs and spaces at the end of the line. The second replaces runs of tabs and spaces at the beginning of comment lines with a single space. perl -i -pe 's,[\t ]+$,,; s,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c This removes some unimportant discrepancies between the two core driver forks so that 'diff' can be used to reveal the important ones, to facilitate reunification. Signed-off-by: Finn Thain --- drivers/scsi/NCR5380.c | 550 +++++++++++++++++++++---------------------- drivers/scsi/atari_NCR5380.c | 110 ++++---- 2 files changed, 330 insertions(+), 330 deletions(-) Index: linux/drivers/scsi/NCR5380.c =================================================================== --- linux.orig/drivers/scsi/NCR5380.c 2015-12-06 12:31:15.000000000 +1100 +++ linux/drivers/scsi/NCR5380.c 2015-12-06 12:31:16.000000000 +1100 @@ -1,17 +1,17 @@ -/* +/* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * - * For more information, please consult + * For more information, please consult * * NCR 5380 Family * SCSI Protocol Controller @@ -30,17 +30,17 @@ */ /* - * Further development / testing that should be done : + * Further development / testing that should be done : * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete - * code so that everything does the same thing that's done at the - * end of a pseudo-DMA read operation. + * code so that everything does the same thing that's done at the + * end of a pseudo-DMA read operation. * * 2. Fix REAL_DMA (interrupt driven, polled works fine) - - * basically, transfer size needs to be reduced by one - * and the last byte read as is done with PSEUDO_DMA. - * - * 4. Test SCSI-II tagged queueing (I have no devices which support - * tagged queueing) + * basically, transfer size needs to be reduced by one + * and the last byte read as is done with PSEUDO_DMA. + * + * 4. Test SCSI-II tagged queueing (I have no devices which support + * tagged queueing) */ #ifndef notyet @@ -56,27 +56,27 @@ /* * Design * - * This is a generic 5380 driver. To use it on a different platform, + * This is a generic 5380 driver. To use it on a different platform, * one simply writes appropriate system specific macros (ie, data - * transfer - some PC's will use the I/O bus, 68K's must use + * transfer - some PC's will use the I/O bus, 68K's must use * memory mapped) and drops this file in their 'C' wrapper. * - * As far as command queueing, two queues are maintained for + * As far as command queueing, two queues are maintained for * each 5380 in the system - commands that haven't been issued yet, - * and commands that are currently executing. This means that an - * unlimited number of commands may be queued, letting - * more commands propagate from the higher driver levels giving higher - * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, - * allowing multiple commands to propagate all the way to a SCSI-II device + * and commands that are currently executing. This means that an + * unlimited number of commands may be queued, letting + * more commands propagate from the higher driver levels giving higher + * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported, + * allowing multiple commands to propagate all the way to a SCSI-II device * while a command is already executing. * * - * Issues specific to the NCR5380 : + * Issues specific to the NCR5380 : * - * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead - * piece of hardware that requires you to sit in a loop polling for - * the REQ signal as long as you are connected. Some devices are - * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect + * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead + * piece of hardware that requires you to sit in a loop polling for + * the REQ signal as long as you are connected. Some devices are + * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect * while doing long seek operations. [...] These * broken devices are the exception rather than the rule and I'd rather * spend my time optimizing for the normal case. @@ -87,23 +87,23 @@ * which is started from a workqueue for each NCR5380 host in the * system. It attempts to establish I_T_L or I_T_L_Q nexuses by * removing the commands from the issue queue and calling - * NCR5380_select() if a nexus is not established. + * NCR5380_select() if a nexus is not established. * * Once a nexus is established, the NCR5380_information_transfer() * phase goes through the various phases as instructed by the target. * if the target goes into MSG IN and sends a DISCONNECT message, * the command structure is placed into the per instance disconnected - * queue, and NCR5380_main tries to find more work. If the target is + * queue, and NCR5380_main tries to find more work. If the target is * idle for too long, the system will try to sleep. * * If a command has disconnected, eventually an interrupt will trigger, * calling NCR5380_intr() which will in turn call NCR5380_reselect * to reestablish a nexus. This will run main if necessary. * - * On command termination, the done function will be called as + * On command termination, the done function will be called as * appropriate. * - * SCSI pointers are maintained in the SCp field of SCSI command + * SCSI pointers are maintained in the SCp field of SCSI command * structures, being initialized after the command is connected * in NCR5380_select, and set as appropriate in NCR5380_information_transfer. * Note that in violation of the standard, an implicit SAVE POINTERS operation @@ -113,48 +113,48 @@ /* * Using this file : * This file a skeleton Linux SCSI driver for the NCR 5380 series - * of chips. To use it, you write an architecture specific functions + * of chips. To use it, you write an architecture specific functions * and macros and include this file in your driver. * - * These macros control options : - * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be - * defined. - * + * These macros control options : + * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be + * defined. + * * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. + * transceivers. * * DONT_USE_INTR - if defined, never use interrupts, even if we probe or - * override-configure an IRQ. + * override-configure an IRQ. * * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * * REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't - * rely on phase mismatch and EOP interrupts to determine end - * of phase. + * rely on phase mismatch and EOP interrupts to determine end + * of phase. * * These macros MUST be defined : - * + * * NCR5380_read(register) - read from the specified register * - * NCR5380_write(register, value) - write to the specific register + * NCR5380_write(register, value) - write to the specific register * - * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * NCR5380_implementation_fields - additional fields needed for this + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented - * REAL functions : + * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. - * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * Note that the DMA setup functions should return the number of bytes + * that they were able to program the controller for. * - * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * Also note that generic i386/PC versions of these macros are + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -165,7 +165,7 @@ * NCR5380_pread(instance, dst, count); * * The generic driver is initialized by calling NCR5380_init(instance), - * after setting the appropriate host specific fields and ID. If the + * after setting the appropriate host specific fields and ID. If the * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance, * possible) function may be used. */ @@ -174,16 +174,16 @@ static int do_abort(struct Scsi_Host *); static void do_reset(struct Scsi_Host *); /** - * initialize_SCp - init the scsi pointer field - * @cmd: command block to set up + * initialize_SCp - init the scsi pointer field + * @cmd: command block to set up * - * Set up the internal fields in the SCSI command. + * Set up the internal fields in the SCSI command. */ static inline void initialize_SCp(struct scsi_cmnd *cmd) { - /* - * Initialize the Scsi Pointer field so that all of the commands in the + /* + * Initialize the Scsi Pointer field so that all of the commands in the * various queues are valid. */ @@ -268,12 +268,12 @@ static struct { unsigned char value; const char *name; } phases[] __maybe_unused = { - {PHASE_DATAOUT, "DATAOUT"}, - {PHASE_DATAIN, "DATAIN"}, - {PHASE_CMDOUT, "CMDOUT"}, - {PHASE_STATIN, "STATIN"}, - {PHASE_MSGOUT, "MSGOUT"}, - {PHASE_MSGIN, "MSGIN"}, + {PHASE_DATAOUT, "DATAOUT"}, + {PHASE_DATAIN, "DATAIN"}, + {PHASE_CMDOUT, "CMDOUT"}, + {PHASE_STATIN, "STATIN"}, + {PHASE_MSGOUT, "MSGOUT"}, + {PHASE_MSGIN, "MSGIN"}, {PHASE_UNKNOWN, "UNKNOWN"} }; @@ -281,47 +281,47 @@ static struct { static struct { unsigned char mask; const char *name; -} signals[] = { - {SR_DBP, "PARITY"}, - {SR_RST, "RST"}, - {SR_BSY, "BSY"}, - {SR_REQ, "REQ"}, - {SR_MSG, "MSG"}, - {SR_CD, "CD"}, - {SR_IO, "IO"}, - {SR_SEL, "SEL"}, +} signals[] = { + {SR_DBP, "PARITY"}, + {SR_RST, "RST"}, + {SR_BSY, "BSY"}, + {SR_REQ, "REQ"}, + {SR_MSG, "MSG"}, + {SR_CD, "CD"}, + {SR_IO, "IO"}, + {SR_SEL, "SEL"}, {0, NULL} -}, +}, basrs[] = { - {BASR_ATN, "ATN"}, - {BASR_ACK, "ACK"}, + {BASR_ATN, "ATN"}, + {BASR_ACK, "ACK"}, {0, NULL} -}, -icrs[] = { - {ICR_ASSERT_RST, "ASSERT RST"}, - {ICR_ASSERT_ACK, "ASSERT ACK"}, - {ICR_ASSERT_BSY, "ASSERT BSY"}, - {ICR_ASSERT_SEL, "ASSERT SEL"}, - {ICR_ASSERT_ATN, "ASSERT ATN"}, - {ICR_ASSERT_DATA, "ASSERT DATA"}, +}, +icrs[] = { + {ICR_ASSERT_RST, "ASSERT RST"}, + {ICR_ASSERT_ACK, "ASSERT ACK"}, + {ICR_ASSERT_BSY, "ASSERT BSY"}, + {ICR_ASSERT_SEL, "ASSERT SEL"}, + {ICR_ASSERT_ATN, "ASSERT ATN"}, + {ICR_ASSERT_DATA, "ASSERT DATA"}, {0, NULL} -}, -mrs[] = { - {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, - {MR_TARGET, "MODE TARGET"}, - {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, - {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, - {MR_MONITOR_BSY, "MODE MONITOR BSY"}, - {MR_DMA_MODE, "MODE DMA"}, - {MR_ARBITRATE, "MODE ARBITRATION"}, +}, +mrs[] = { + {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, + {MR_TARGET, "MODE TARGET"}, + {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, + {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"}, + {MR_MONITOR_BSY, "MODE MONITOR BSY"}, + {MR_DMA_MODE, "MODE DMA"}, + {MR_ARBITRATE, "MODE ARBITRATION"}, {0, NULL} }; /** - * NCR5380_print - print scsi bus signals - * @instance: adapter state to dump + * NCR5380_print - print scsi bus signals + * @instance: adapter state to dump * - * Print the SCSI bus signals for debugging purposes + * Print the SCSI bus signals for debugging purposes */ static void NCR5380_print(struct Scsi_Host *instance) @@ -355,10 +355,10 @@ static void NCR5380_print(struct Scsi_Ho /** - * NCR5380_print_phase - show SCSI phase - * @instance: adapter to dump + * NCR5380_print_phase - show SCSI phase + * @instance: adapter to dump * - * Print the current SCSI phase for debugging purposes + * Print the current SCSI phase for debugging purposes */ static void NCR5380_print_phase(struct Scsi_Host *instance) @@ -380,15 +380,15 @@ static void NCR5380_print_phase(struct S static int probe_irq __initdata; /** - * probe_intr - helper for IRQ autoprobe - * @irq: interrupt number - * @dev_id: unused - * @regs: unused + * probe_intr - helper for IRQ autoprobe + * @irq: interrupt number + * @dev_id: unused + * @regs: unused * - * Set a flag to indicate the IRQ in question was received. This is - * used by the IRQ probe code. + * Set a flag to indicate the IRQ in question was received. This is + * used by the IRQ probe code. */ - + static irqreturn_t __init probe_intr(int irq, void *dev_id) { probe_irq = irq; @@ -396,12 +396,12 @@ static irqreturn_t __init probe_intr(int } /** - * NCR5380_probe_irq - find the IRQ of an NCR5380 - * @instance: NCR5380 controller - * @possible: bitmask of ISA IRQ lines + * NCR5380_probe_irq - find the IRQ of an NCR5380 + * @instance: NCR5380 controller + * @possible: bitmask of ISA IRQ lines * - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ - * and then looking to see what interrupt actually turned up. + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ + * and then looking to see what interrupt actually turned up. */ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, @@ -420,7 +420,7 @@ static int __init __maybe_unused NCR5380 /* * A interrupt is triggered whenever BSY = false, SEL = true - * and a bit set in the SELECT_ENABLE_REG is asserted on the + * and a bit set in the SELECT_ENABLE_REG is asserted on the * SCSI bus. * * Note that the bus is only driven when the phase control signals @@ -435,7 +435,7 @@ static int __init __maybe_unused NCR5380 while (probe_irq == NO_IRQ && time_before(jiffies, timeout)) schedule_timeout_uninterruptible(1); - + NCR5380_write(SELECT_ENABLE_REG, 0); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); @@ -447,10 +447,10 @@ static int __init __maybe_unused NCR5380 } /** - * NCR58380_info - report driver and host information - * @instance: relevant scsi host instance + * NCR58380_info - report driver and host information + * @instance: relevant scsi host instance * - * For use as the host template info() handler. + * For use as the host template info() handler. */ static const char *NCR5380_info(struct Scsi_Host *instance) @@ -522,17 +522,17 @@ static int __maybe_unused NCR5380_show_i #endif /** - * NCR5380_init - initialise an NCR5380 - * @instance: adapter to configure - * @flags: control flags + * NCR5380_init - initialise an NCR5380 + * @instance: adapter to configure + * @flags: control flags * - * Initializes *instance and corresponding 5380 chip, - * with flags OR'd into the initial flags value. + * Initializes *instance and corresponding 5380 chip, + * with flags OR'd into the initial flags value. * - * Notes : I assume that the host, hostno, and id bits have been - * set correctly. I don't care about the irq and other fields. + * Notes : I assume that the host, hostno, and id bits have been + * set correctly. I don't care about the irq and other fields. * - * Returns 0 for success + * Returns 0 for success */ static int NCR5380_init(struct Scsi_Host *instance, int flags) @@ -561,7 +561,7 @@ static int NCR5380_init(struct Scsi_Host INIT_LIST_HEAD(&hostdata->disconnected); hostdata->flags = flags; - + INIT_WORK(&hostdata->main_task, NCR5380_main); hostdata->work_q = alloc_workqueue("ncr5380_%d", WQ_UNBOUND | WQ_MEM_RECLAIM, @@ -647,8 +647,8 @@ static int NCR5380_maybe_reset_bus(struc } /** - * NCR5380_exit - remove an NCR5380 - * @instance: adapter to remove + * NCR5380_exit - remove an NCR5380 + * @instance: adapter to remove */ static void NCR5380_exit(struct Scsi_Host *instance) @@ -719,10 +719,10 @@ static int NCR5380_queue_command(struct spin_lock_irqsave(&hostdata->lock, flags); - /* - * Insert the cmd into the issue queue. Note that REQUEST SENSE + /* + * Insert the cmd into the issue queue. Note that REQUEST SENSE * commands are added to the head of the queue since any command will - * clear the contingent allegiance condition that exists and the + * clear the contingent allegiance condition that exists and the * sense data is only guaranteed to be valid while the condition exists. */ @@ -800,12 +800,12 @@ static void requeue_cmd(struct Scsi_Host } /** - * NCR5380_main - NCR state machines + * NCR5380_main - NCR state machines * - * NCR5380_main is a coroutine that runs as long as more work can - * be done on the NCR5380 host adapters in a system. Both - * NCR5380_queue_command() and NCR5380_intr() will try to start it - * in case it is not running. + * NCR5380_main is a coroutine that runs as long as more work can + * be done on the NCR5380 host adapters in a system. Both + * NCR5380_queue_command() and NCR5380_intr() will try to start it + * in case it is not running. */ static void NCR5380_main(struct work_struct *work) @@ -815,7 +815,7 @@ static void NCR5380_main(struct work_str struct Scsi_Host *instance = hostdata->host; struct scsi_cmnd *cmd; int done; - + do { done = 1; @@ -974,37 +974,37 @@ static irqreturn_t NCR5380_intr(int irq, return IRQ_RETVAL(handled); } -#endif +#endif -/* +/* * Function : int NCR5380_select(struct Scsi_Host *instance, - * struct scsi_cmnd *cmd) + * struct scsi_cmnd *cmd) * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, - * including ARBITRATION, SELECTION, and initial message out for - * IDENTIFY and queue messages. + * including ARBITRATION, SELECTION, and initial message out for + * IDENTIFY and queue messages. + * + * Inputs : instance - instantiation of the 5380 driver on which this + * target lives, cmd - SCSI command to execute. * - * Inputs : instance - instantiation of the 5380 driver on which this - * target lives, cmd - SCSI command to execute. - * * Returns cmd if selection failed but should be retried, * NULL if selection failed and should not be retried, or * NULL if selection succeeded (hostdata->connected == cmd). * - * Side effects : - * If bus busy, arbitration failed, etc, NCR5380_select() will exit - * with registers as they should have been on entry - ie - * SELECT_ENABLE will be set appropriately, the NCR5380 - * will cease to drive any SCSI bus signals. - * - * If successful : I_T_L or I_T_L_Q nexus will be established, - * instance->connected will be set to cmd. - * SELECT interrupt will be disabled. + * Side effects : + * If bus busy, arbitration failed, etc, NCR5380_select() will exit + * with registers as they should have been on entry - ie + * SELECT_ENABLE will be set appropriately, the NCR5380 + * will cease to drive any SCSI bus signals. + * + * If successful : I_T_L or I_T_L_Q nexus will be established, + * instance->connected will be set to cmd. + * SELECT interrupt will be disabled. * - * If failed (no target) : cmd->scsi_done() will be called, and the - * cmd->result host byte set to DID_BAD_TARGET. + * If failed (no target) : cmd->scsi_done() will be called, and the + * cmd->result host byte set to DID_BAD_TARGET. */ - + static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) { @@ -1027,14 +1027,14 @@ static struct scsi_cmnd *NCR5380_select( */ hostdata->selecting = cmd; - /* - * Set the phase bits to 0, otherwise the NCR5380 won't drive the + /* + * Set the phase bits to 0, otherwise the NCR5380 won't drive the * data bus during SELECTION. */ NCR5380_write(TARGET_COMMAND_REG, 0); - /* + /* * Start arbitration. */ @@ -1080,8 +1080,8 @@ static struct scsi_cmnd *NCR5380_select( NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY); - /* - * Again, bus clear + bus settle time is 1.2us, however, this is + /* + * Again, bus clear + bus settle time is 1.2us, however, this is * a minimum so we'll udelay ceil(1.2) */ @@ -1104,14 +1104,14 @@ static struct scsi_cmnd *NCR5380_select( dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n"); - /* - * Now that we have won arbitration, start Selection process, asserting + /* + * Now that we have won arbitration, start Selection process, asserting * the host and target ID's on the SCSI bus. */ NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << scmd_id(cmd)))); - /* + /* * Raise ATN while SEL is true before BSY goes false from arbitration, * since this is the only way to guarantee that we'll get a MESSAGE OUT * phase immediately after selection. @@ -1120,7 +1120,7 @@ static struct scsi_cmnd *NCR5380_select( NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); NCR5380_write(MODE_REG, MR_BASE); - /* + /* * Reselect interrupts must be turned off prior to the dropping of BSY, * otherwise we will trigger an interrupt. */ @@ -1129,7 +1129,7 @@ static struct scsi_cmnd *NCR5380_select( spin_unlock_irq(&hostdata->lock); /* - * The initiator shall then wait at least two deskew delays and release + * The initiator shall then wait at least two deskew delays and release * the BSY signal. */ udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */ @@ -1137,17 +1137,17 @@ static struct scsi_cmnd *NCR5380_select( /* Reset BSY */ NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL)); - /* + /* * Something weird happens when we cease to drive BSY - looks - * like the board/chip is letting us do another read before the + * like the board/chip is letting us do another read before the * appropriate propagation delay has expired, and we're confusing * a BSY signal from ourselves as the target's response to SELECTION. * * A small delay (the 'C++' frontend breaks the pipeline with an * unnecessary jump, making it work on my 386-33/Trantor T128, the - * tighter 'C' code breaks and requires this) solves the problem - - * the 1 us delay is arbitrary, and only used because this delay will - * be the same on other platforms and since it works here, it should + * tighter 'C' code breaks and requires this) solves the problem - + * the 1 us delay is arbitrary, and only used because this delay will + * be the same on other platforms and since it works here, it should * work there. * * wingel suggests that this could be due to failing to wait @@ -1158,8 +1158,8 @@ static struct scsi_cmnd *NCR5380_select( dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd)); - /* - * The SCSI specification calls for a 250 ms timeout for the actual + /* + * The SCSI specification calls for a 250 ms timeout for the actual * selection. */ @@ -1190,9 +1190,9 @@ static struct scsi_cmnd *NCR5380_select( goto out; } - /* - * No less than two deskew delays after the initiator detects the - * BSY signal is true, it shall release the SEL signal and may + /* + * No less than two deskew delays after the initiator detects the + * BSY signal is true, it shall release the SEL signal and may * change the DATA BUS. -wingel */ @@ -1201,18 +1201,18 @@ static struct scsi_cmnd *NCR5380_select( NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); /* - * Since we followed the SCSI spec, and raised ATN while SEL + * Since we followed the SCSI spec, and raised ATN while SEL * was true but before BSY was false during selection, the information * transfer phase should be a MESSAGE OUT phase so that we can send the * IDENTIFY message. - * + * * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG * message (2 bytes) with a tag ID that we increment with every command * until it wraps back to 0. * * XXX - it turns out that there are some broken SCSI-II devices, - * which claim to support tagged queuing but fail when more than - * some number of commands are issued at once. + * which claim to support tagged queuing but fail when more than + * some number of commands are issued at once. */ /* Wait for start of REQ/ACK handshake */ @@ -1258,27 +1258,27 @@ out: return cmd; } -/* - * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) +/* + * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using polled I/O * - * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. - * + * Inputs : instance - instance of driver, *phase - pointer to + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. + * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. * * XXX Note : handling for bus free may be useful. */ /* - * Note : this code is not as quick as it could be, however it + * Note : this code is not as quick as it could be, however it * IS 100% reliable, and for the actual data transfer where speed * counts, we will always do a pseudo DMA or DMA transfer. */ @@ -1288,8 +1288,8 @@ static int NCR5380_transfer_pio(struct S int c = *count; unsigned char *d = *data; - /* - * The NCR5380 chip will only drive the SCSI bus when the + /* + * The NCR5380 chip will only drive the SCSI bus when the * phase specified in the appropriate bits of the TARGET COMMAND * REGISTER match the STATUS REGISTER */ @@ -1297,9 +1297,9 @@ static int NCR5380_transfer_pio(struct S NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); do { - /* - * Wait for assertion of REQ, after which the phase bits will be - * valid + /* + * Wait for assertion of REQ, after which the phase bits will be + * valid */ if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0) @@ -1321,7 +1321,7 @@ static int NCR5380_transfer_pio(struct S ++d; - /* + /* * The SCSI standard suggests that in MSGOUT phase, the initiator * should drop ATN on the last byte of the message phase * after REQ has been asserted for the handshake but before @@ -1350,13 +1350,13 @@ static int NCR5380_transfer_pio(struct S dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n"); /* - * We have several special cases to consider during REQ/ACK handshaking : - * 1. We were in MSGOUT phase, and we are on the last byte of the - * message. ATN must be dropped as ACK is dropped. - * - * 2. We are in a MSGIN phase, and we are on the last byte of the - * message. We must exit with ACK asserted, so that the calling - * code may raise ATN before dropping ACK to reject the message. + * We have several special cases to consider during REQ/ACK handshaking : + * 1. We were in MSGOUT phase, and we are on the last byte of the + * message. ATN must be dropped as ACK is dropped. + * + * 2. We are in a MSGIN phase, and we are on the last byte of the + * message. We must exit with ACK asserted, so that the calling + * code may raise ATN before dropping ACK to reject the message. * * 3. ACK and ATN are clear and the target may proceed as normal. */ @@ -1399,7 +1399,7 @@ static int NCR5380_transfer_pio(struct S * it. When the driver is initialized, the NCR5380_intr() handler has not yet * been installed. And when in EH we may have released the ST DMA interrupt. */ - + static void do_reset(struct Scsi_Host *instance) { unsigned long flags; @@ -1431,12 +1431,12 @@ static int do_abort(struct Scsi_Host *in /* Request message out phase */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN); - /* - * Wait for the target to indicate a valid phase by asserting - * REQ. Once this happens, we'll have either a MSGOUT phase - * and can immediately send the ABORT message, or we'll have some + /* + * Wait for the target to indicate a valid phase by asserting + * REQ. Once this happens, we'll have either a MSGOUT phase + * and can immediately send the ABORT message, or we'll have some * other phase and will have to source/sink data. - * + * * We really don't care what value was on the bus or what value * the target sees, so we just handshake. */ @@ -1446,7 +1446,7 @@ static int do_abort(struct Scsi_Host *in goto timeout; tmp = NCR5380_read(STATUS_REG) & PHASE_MASK; - + NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); if (tmp != PHASE_MSGOUT) { @@ -1475,22 +1475,22 @@ timeout: } #if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL) -/* - * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) +/* + * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using either real - * or pseudo DMA. + * or pseudo DMA. + * + * Inputs : instance - instance of driver, *phase - pointer to + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * - * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. - * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. */ @@ -1532,7 +1532,7 @@ static int NCR5380_transfer_dma(struct S #else /* * Note : on my sample board, watch-dog timeouts occurred when interrupts - * were not disabled for the duration of a single DMA transfer, from + * were not disabled for the duration of a single DMA transfer, from * before the setting of DMA mode to after transfer of the last byte. */ @@ -1545,9 +1545,9 @@ static int NCR5380_transfer_dma(struct S dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); - /* - * On the PAS16 at least I/O recovery delays are not needed here. - * Everyone else seems to want them. + /* + * On the PAS16 at least I/O recovery delays are not needed here. + * Everyone else seems to want them. */ if (p & SR_IO) { @@ -1660,24 +1660,24 @@ static int NCR5380_transfer_dma(struct S hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1); if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) { /* - * We can't disable DMA mode after successfully transferring + * We can't disable DMA mode after successfully transferring * what we plan to be the last byte, since that would open up - * a race condition where if the target asserted REQ before + * a race condition where if the target asserted REQ before * we got the DMA mode reset, the NCR5380 would have latched * an additional byte into the INPUT DATA register and we'd * have dropped it. - * - * The workaround was to transfer one fewer bytes than we - * intended to with the pseudo-DMA read function, wait for + * + * The workaround was to transfer one fewer bytes than we + * intended to with the pseudo-DMA read function, wait for * the chip to latch the last byte, read it, and then disable * pseudo-DMA mode. - * + * * After REQ is asserted, the NCR5380 asserts DRQ and ACK. * REQ is deasserted when ACK is asserted, and not reasserted * until ACK goes false. Since the NCR5380 won't lower ACK * until DACK is asserted, which won't happen unless we twiddle - * the DMA port or we take the NCR5380 out of DMA mode, we - * can guarantee that we won't handshake another extra + * the DMA port or we take the NCR5380 out of DMA mode, we + * can guarantee that we won't handshake another extra * byte. */ @@ -1697,8 +1697,8 @@ static int NCR5380_transfer_dma(struct S foo = NCR5380_pwrite(instance, d, c); if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) { /* - * Wait for the last byte to be sent. If REQ is being asserted for - * the byte we're interested, we'll ACK it and it will go false. + * Wait for the last byte to be sent. If REQ is being asserted for + * the byte we're interested, we'll ACK it and it will go false. */ if (NCR5380_poll_politely2(instance, BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ, @@ -1722,18 +1722,18 @@ static int NCR5380_transfer_dma(struct S /* * Function : NCR5380_information_transfer (struct Scsi_Host *instance) * - * Purpose : run through the various SCSI phases and do as the target - * directs us to. Operates on the currently connected command, - * instance->connected. + * Purpose : run through the various SCSI phases and do as the target + * directs us to. Operates on the currently connected command, + * instance->connected. * * Inputs : instance, instance for which we are doing commands * - * Side effects : SCSI things happen, the disconnected queue will be - * modified if a command disconnects, *instance->connected will - * change. + * Side effects : SCSI things happen, the disconnected queue will be + * modified if a command disconnects, *instance->connected will + * change. * - * XXX Note : we need to watch for bus free or a reset condition here - * to recover from an unexpected bus free condition. + * XXX Note : we need to watch for bus free or a reset condition here + * to recover from an unexpected bus free condition. */ static void NCR5380_information_transfer(struct Scsi_Host *instance) { @@ -1779,7 +1779,7 @@ static void NCR5380_information_transfer return; #endif case PHASE_DATAIN: - /* + /* * If there is no room left in the current buffer in the * scatter-gather list, move onto the next one. */ @@ -1794,7 +1794,7 @@ static void NCR5380_information_transfer cmd->SCp.buffers_residual); } /* - * The preferred transfer method is going to be + * The preferred transfer method is going to be * PSEUDO-DMA for systems that are strictly PIO, * since we can let the hardware do the handshaking. * @@ -1870,8 +1870,8 @@ static void NCR5380_information_transfer complete_cmd(instance, cmd); } - /* - * Restore phase bits to 0 so an interrupted selection, + /* + * Restore phase bits to 0 so an interrupted selection, * arbitration can resume. */ NCR5380_write(TARGET_COMMAND_REG, 0); @@ -1902,8 +1902,8 @@ static void NCR5380_information_transfer instance, "connected command %p for target %d lun %llu moved to disconnected queue\n", cmd, scmd_id(cmd), cmd->device->lun); - /* - * Restore phase bits to 0 so an interrupted selection, + /* + * Restore phase bits to 0 so an interrupted selection, * arbitration can resume. */ NCR5380_write(TARGET_COMMAND_REG, 0); @@ -1912,14 +1912,14 @@ static void NCR5380_information_transfer NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return; } - /* + /* * The SCSI data pointer is *IMPLICITLY* saved on a disconnect - * operation, in violation of the SCSI spec so we can safely + * operation, in violation of the SCSI spec so we can safely * ignore SAVE/RESTORE pointers calls. * - * Unfortunately, some disks violate the SCSI spec and + * Unfortunately, some disks violate the SCSI spec and * don't issue the required SAVE_POINTERS message before - * disconnecting, and we have to break spec to remain + * disconnecting, and we have to break spec to remain * compatible. */ case SAVE_POINTERS: @@ -1928,17 +1928,17 @@ static void NCR5380_information_transfer NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); break; case EXTENDED_MESSAGE: -/* +/* * Extended messages are sent in the following format : - * Byte + * Byte * 0 EXTENDED_MESSAGE == 1 - * 1 length (includes one byte for code, doesn't - * include first two bytes) + * 1 length (includes one byte for code, doesn't + * include first two bytes) * 2 code * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since spi_print_msg() wants the whole thing. + * byte, since spi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -1990,8 +1990,8 @@ static void NCR5380_information_transfer /* Fall through to reject message */ - /* - * If we get something weird that we aren't expecting, + /* + * If we get something weird that we aren't expecting, * reject it. */ default: @@ -2028,10 +2028,10 @@ static void NCR5380_information_transfer case PHASE_CMDOUT: len = cmd->cmd_len; data = cmd->cmnd; - /* - * XXX for performance reasons, on machines with a - * PSEUDO-DMA architecture we should probably - * use the dma transfer function. + /* + * XXX for performance reasons, on machines with a + * PSEUDO-DMA architecture we should probably + * use the dma transfer function. */ NCR5380_transfer_pio(instance, &phase, &len, &data); break; @@ -2056,10 +2056,10 @@ static void NCR5380_information_transfer /* * Function : void NCR5380_reselect (struct Scsi_Host *instance) * - * Purpose : does reselection, initializing the instance->connected - * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q - * nexus has been reestablished, - * + * Purpose : does reselection, initializing the instance->connected + * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q + * nexus has been reestablished, + * * Inputs : instance - this instance of the NCR5380. */ @@ -2084,7 +2084,7 @@ static void NCR5380_reselect(struct Scsi dsprintk(NDEBUG_RESELECTION, instance, "reselect\n"); - /* + /* * At this point, we have detected that our SCSI ID is on the bus, * SEL is true and BSY was false for at least one bus settle delay * (400 ns). @@ -2179,12 +2179,12 @@ static void NCR5380_reselect(struct Scsi * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * * Purpose : called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). + * mismatch occurs (which would finish the DMA transfer). * * Inputs : instance - this instance of the NCR5380. * * Returns : pointer to the scsi_cmnd structure for which the I_T_L - * nexus has been reestablished, on failure NULL is returned. + * nexus has been reestablished, on failure NULL is returned. */ #ifdef REAL_DMA @@ -2197,7 +2197,7 @@ static void NCR5380_dma_complete(NCR5380 * * Wait for final byte to transfer, ie wait for ACK to go false. * - * We should use the Last Byte Sent bit, unfortunately this is + * We should use the Last Byte Sent bit, unfortunately this is * not available on the 5380/5381 (only the various CMOS chips) * * FIXME: timeout, and need to handle long timeout/irq case Index: linux/drivers/scsi/atari_NCR5380.c =================================================================== --- linux.orig/drivers/scsi/atari_NCR5380.c 2015-12-06 12:31:15.000000000 +1100 +++ linux/drivers/scsi/atari_NCR5380.c 2015-12-06 12:31:16.000000000 +1100 @@ -1,15 +1,15 @@ /* * NCR 5380 generic driver routines. These should make it *trivial* - * to implement 5380 SCSI drivers under Linux with a non-trantor - * architecture. + * to implement 5380 SCSI drivers under Linux with a non-trantor + * architecture. * - * Note that these routines also work with NR53c400 family chips. + * Note that these routines also work with NR53c400 family chips. * * Copyright 1993, Drew Eckhardt - * Visionary Computing - * (Unix and Linux consulting and custom programming) - * drew@colorado.edu - * +1 (303) 666-5836 + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 666-5836 * * For more information, please consult * @@ -93,10 +93,10 @@ * * These macros control options : * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically - * for commands that return with a CHECK CONDITION status. + * for commands that return with a CHECK CONDITION status. * * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential - * transceivers. + * transceivers. * * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. * @@ -109,17 +109,17 @@ * NCR5380_write(register, value) - write to the specific register * * NCR5380_implementation_fields - additional fields needed for this - * specific implementation of the NCR5380 + * specific implementation of the NCR5380 * * Either real DMA *or* pseudo DMA may be implemented * REAL functions : * NCR5380_REAL_DMA should be defined if real DMA is to be used. * Note that the DMA setup functions should return the number of bytes - * that they were able to program the controller for. + * that they were able to program the controller for. * * Also note that generic i386/PC versions of these macros are - * available as NCR5380_i386_dma_write_setup, - * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. + * available as NCR5380_i386_dma_write_setup, + * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual. * * NCR5380_dma_write_setup(instance, src, count) - initialize * NCR5380_dma_read_setup(instance, dst, count) - initialize @@ -973,7 +973,7 @@ static void NCR5380_main(struct work_str * Function : void NCR5380_dma_complete (struct Scsi_Host *instance) * * Purpose : Called by interrupt handler when DMA finishes or a phase - * mismatch occurs (which would finish the DMA transfer). + * mismatch occurs (which would finish the DMA transfer). * * Inputs : instance - this instance of the NCR5380. */ @@ -1160,31 +1160,31 @@ static irqreturn_t NCR5380_intr(int irq, /* * Function : int NCR5380_select(struct Scsi_Host *instance, - * struct scsi_cmnd *cmd) + * struct scsi_cmnd *cmd) * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, - * including ARBITRATION, SELECTION, and initial message out for - * IDENTIFY and queue messages. + * including ARBITRATION, SELECTION, and initial message out for + * IDENTIFY and queue messages. * * Inputs : instance - instantiation of the 5380 driver on which this - * target lives, cmd - SCSI command to execute. + * target lives, cmd - SCSI command to execute. * * Returns cmd if selection failed but should be retried, * NULL if selection failed and should not be retried, or * NULL if selection succeeded (hostdata->connected == cmd). * * Side effects : - * If bus busy, arbitration failed, etc, NCR5380_select() will exit - * with registers as they should have been on entry - ie - * SELECT_ENABLE will be set appropriately, the NCR5380 - * will cease to drive any SCSI bus signals. - * - * If successful : I_T_L or I_T_L_Q nexus will be established, - * instance->connected will be set to cmd. - * SELECT interrupt will be disabled. + * If bus busy, arbitration failed, etc, NCR5380_select() will exit + * with registers as they should have been on entry - ie + * SELECT_ENABLE will be set appropriately, the NCR5380 + * will cease to drive any SCSI bus signals. + * + * If successful : I_T_L or I_T_L_Q nexus will be established, + * instance->connected will be set to cmd. + * SELECT interrupt will be disabled. * - * If failed (no target) : cmd->scsi_done() will be called, and the - * cmd->result host byte set to DID_BAD_TARGET. + * If failed (no target) : cmd->scsi_done() will be called, and the + * cmd->result host byte set to DID_BAD_TARGET. */ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance, @@ -1397,8 +1397,8 @@ static struct scsi_cmnd *NCR5380_select( * until it wraps back to 0. * * XXX - it turns out that there are some broken SCSI-II devices, - * which claim to support tagged queuing but fail when more than - * some number of commands are issued at once. + * which claim to support tagged queuing but fail when more than + * some number of commands are issued at once. */ /* Wait for start of REQ/ACK handshake */ @@ -1460,19 +1460,19 @@ out: /* * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using polled I/O * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes are transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes are transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. * * XXX Note : handling for bus free may be useful. */ @@ -1559,11 +1559,11 @@ static int NCR5380_transfer_pio(struct S /* * We have several special cases to consider during REQ/ACK handshaking : * 1. We were in MSGOUT phase, and we are on the last byte of the - * message. ATN must be dropped as ACK is dropped. + * message. ATN must be dropped as ACK is dropped. * * 2. We are in a MSGIN phase, and we are on the last byte of the - * message. We must exit with ACK asserted, so that the calling - * code may raise ATN before dropping ACK to reject the message. + * message. We must exit with ACK asserted, so that the calling + * code may raise ATN before dropping ACK to reject the message. * * 3. ACK and ATN are clear and the target may proceed as normal. */ @@ -1686,20 +1686,20 @@ timeout: #if defined(REAL_DMA) /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, - * unsigned char *phase, int *count, unsigned char **data) + * unsigned char *phase, int *count, unsigned char **data) * * Purpose : transfers data in given phase using either real - * or pseudo DMA. + * or pseudo DMA. * * Inputs : instance - instance of driver, *phase - pointer to - * what phase is expected, *count - pointer to number of - * bytes to transfer, **data - pointer to data pointer. + * what phase is expected, *count - pointer to number of + * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transferred or exit - * is in same phase. + * maximum number of bytes, 0 if all bytes or transferred or exit + * is in same phase. * - * Also, *phase, *count, *data are modified in place. + * Also, *phase, *count, *data are modified in place. */ @@ -1798,17 +1798,17 @@ static int NCR5380_transfer_dma(struct S * Function : NCR5380_information_transfer (struct Scsi_Host *instance) * * Purpose : run through the various SCSI phases and do as the target - * directs us to. Operates on the currently connected command, - * instance->connected. + * directs us to. Operates on the currently connected command, + * instance->connected. * * Inputs : instance, instance for which we are doing commands * * Side effects : SCSI things happen, the disconnected queue will be - * modified if a command disconnects, *instance->connected will - * change. + * modified if a command disconnects, *instance->connected will + * change. * * XXX Note : we need to watch for bus free or a reset condition here - * to recover from an unexpected bus free condition. + * to recover from an unexpected bus free condition. */ static void NCR5380_information_transfer(struct Scsi_Host *instance) @@ -1918,7 +1918,7 @@ static void NCR5380_information_transfer */ /* ++roman: I suggest, this should be - * #if def(REAL_DMA) + * #if def(REAL_DMA) * instead of leaving REAL_DMA out. */ @@ -2095,7 +2095,7 @@ static void NCR5380_information_transfer * Byte * 0 EXTENDED_MESSAGE == 1 * 1 length (includes one byte for code, doesn't - * include first two bytes) + * include first two bytes) * 2 code * 3..length+1 arguments * @@ -2222,8 +2222,8 @@ static void NCR5380_information_transfer * Function : void NCR5380_reselect (struct Scsi_Host *instance) * * Purpose : does reselection, initializing the instance->connected - * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q - * nexus has been reestablished, + * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q + * nexus has been reestablished, * * Inputs : instance - this instance of the NCR5380. */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/