linux-kernel - [PATCH 1/4] usb: serial: remove redundant conditions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 10 Dec 2015 17:50:09 -0300
From:	"Geyslan G. Bem" <geyslan@...il.com>
To:	peter.senna@...il.com
Cc:	"Geyslan G. Bem" <geyslan@...il.com>,
	Johan Hovold <johan@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/4] usb: serial: remove redundant conditions

This patch removes redundant conditions.

 (!A || (A && B)) is the same as (!A || B).
 (length && length > 5) can be reduced to a single evaluation.

Tested by compilation only.
Caught by cppcheck.

Signed-off-by: Geyslan G. Bem <geyslan@...il.com>
---
 drivers/usb/serial/io_edgeport.c | 35 ++++++++++++++---------------------
 drivers/usb/serial/mos7840.c     |  2 +-
 2 files changed, 15 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index c086697..f49327d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1046,9 +1046,8 @@ static void edge_close(struct usb_serial_port *port)
 
 	edge_port->closePending = true;
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPChase) {
 		/* flush and chase */
 		edge_port->chaseResponsePending = true;
 
@@ -1061,9 +1060,8 @@ static void edge_close(struct usb_serial_port *port)
 			edge_port->chaseResponsePending = false;
 	}
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (edge_serial->epic_descriptor.Supports.IOSPClose))) {
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPClose) {
 	       /* close the port */
 		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
 		send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
@@ -1612,9 +1610,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
 	struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
 	int status;
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPChase) {
 		/* flush and chase */
 		edge_port->chaseResponsePending = true;
 
@@ -1628,9 +1625,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
 		}
 	}
 
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPSetClrBreak) {
 		if (break_state == -1) {
 			dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
 			status = send_iosp_ext_cmd(edge_port,
@@ -2465,9 +2461,8 @@ static void change_port_settings(struct tty_struct *tty,
 		unsigned char stop_char  = STOP_CHAR(tty);
 		unsigned char start_char = START_CHAR(tty);
 
-		if ((!edge_serial->is_epic) ||
-		    ((edge_serial->is_epic) &&
-		     (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
+		if (!edge_serial->is_epic ||
+		    edge_serial->epic_descriptor.Supports.IOSPSetXChar) {
 			send_iosp_ext_cmd(edge_port,
 					IOSP_CMD_SET_XON_CHAR, start_char);
 			send_iosp_ext_cmd(edge_port,
@@ -2494,13 +2489,11 @@ static void change_port_settings(struct tty_struct *tty,
 	}
 
 	/* Set flow control to the configured value */
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)
 		send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
-	if ((!edge_serial->is_epic) ||
-	    ((edge_serial->is_epic) &&
-	     (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
+	if (!edge_serial->is_epic ||
+	    edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)
 		send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
 
 
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 8ac9b55..2c69bfc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -635,7 +635,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
 	 * Byte 4 IIR Port 4 (port.number is 3)
 	 * Byte 5 FIFO status for both */
 
-	if (length && length > 5) {
+	if (length > 5) {
 		dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
 		return;
 	}
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/