| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 19 Jan 2016 11:50:29 +0800
From: Yakir Yang <ykk@...k-chips.com>
To: Russell King - ARM Linux <linux@....linux.org.uk>
Cc: Mark Yao <mark.yao@...k-chips.com>,
Heiko Stuebner <heiko@...ech.de>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
David Airlie <airlied@...ux.ie>, Ben Chan <benchan@...gle.com>,
Ken Mixte <kmixter@...gle.com>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
linux-rockchip@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>,
Kumar Gala <galak@...eaurora.org>,
Thierry Reding <treding@...dia.com>,
linux-arm-kernel@...ts.infradead.org,
Zheng Yang <zhengyang@...k-chips.com>
Subject: Re: [PATCH v4] drm/rockchip: hdmi: add Innosilicon HDMI support
Hi Russell,
Thanks for your comments :-D
On 01/19/2016 01:15 AM, Russell King - ARM Linux wrote:
> Hi,
>
> Some comments below...
>
> On Mon, Jan 18, 2016 at 10:42:20PM +0800, Yakir Yang wrote:
>> +static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi)
>> +{
>> + char info[HDMI_SIZE_AVI_INFOFRAME] = {0};
>> + int avi_color_mode;
>> + int i;
>> +
>> + hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, INFOFRAME_AVI);
>> +
>> + info[0] = 0x82;
>> + info[1] = 0x02;
>> + info[2] = 0x0D;
>> + info[3] = info[0] + info[1] + info[2];
>> +
>> + if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_RGB)
>> + avi_color_mode = AVI_COLOR_MODE_RGB;
>> + else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV444)
>> + avi_color_mode = AVI_COLOR_MODE_YCBCR444;
>> + else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV422)
>> + avi_color_mode = AVI_COLOR_MODE_YCBCR422;
>> + else
>> + avi_color_mode = AVI_COLOR_MODE_RGB;
>> +
>> + info[4] = (avi_color_mode << 5);
>> + info[5] = (AVI_COLORIMETRY_NO_DATA << 6) |
>> + (AVI_CODED_FRAME_ASPECT_NO_DATA << 4) |
>> + ACTIVE_ASPECT_RATE_SAME_AS_CODED_FRAME;
>> +
>> + info[6] = 0;
>> + info[7] = hdmi->hdmi_data.vic;
>> +
>> + if (hdmi->hdmi_data.vic == 6 || hdmi->hdmi_data.vic == 7 ||
>> + hdmi->hdmi_data.vic == 21 || hdmi->hdmi_data.vic == 22)
>> + info[8] = 1;
>> + else
>> + info[8] = 0;
>> +
>> + /* Calculate avi info frame checKsum */
>> + for (i = 4; i < HDMI_SIZE_AVI_INFOFRAME; i++)
>> + info[3] += info[i];
>> + info[3] = 0x100 - info[3];
>> +
>> + for (i = 0; i < HDMI_SIZE_AVI_INFOFRAME; i++)
>> + hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, info[i]);
>> +
>> + return 0;
> Is there a reason why the helpers in drivers/video/hdmi.c can't be used
> to generate this?
>
> hdmi_avi_infoframe_init / hdmi_avi_infoframe_pack and
> drm_hdmi_avi_infoframe_from_display_mode ?
Great, thanks for point out, it would make code much clean with those
helper functions.
>> +}
>> +
>> +static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi)
>> +{
>> + char info[HDMI_SIZE_VSI_INFOFRAME] = {0};
>> + int i;
>> +
>> + hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, m_PACKET_VSI_EN,
>> + v_PACKET_VSI_EN(0));
>> +
>> + hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, INFOFRAME_VSI);
>> +
>> + /* Header Bytes */
>> + info[0] = 0x81;
>> + info[1] = 0x01;
>> +
>> + /* PB1 - PB3 contain the 24bit IEEE Registration Identifier */
>> + info[4] = 0x03;
>> + info[5] = 0x0c;
>> + info[6] = 0x00;
>> +
>> + /* PB4 - HDMI_Video_Format into bits 7:5 */
>> + info[7] = 0;
>> +
>> + /*
>> + * PB5 - Depending on the video format, this byte will contain
>> + * either the HDMI_VIC code in buts 7:0, OR the 3D_Structure in
>> + * bits 7:4.
>> + */
>> + info[2] = 0x06 - 2;
>> + info[8] = 0;
>> + info[9] = 0;
>> +
>> + info[3] = info[0] + info[1] + info[2];
>> +
>> + /* Calculate info frame checKsum */
>> + for (i = 4; i < HDMI_SIZE_VSI_INFOFRAME; i++)
>> + info[3] += info[i];
>> + info[3] = 0x100 - info[3];
>> +
>> + for (i = 0; i < HDMI_SIZE_VSI_INFOFRAME; i++)
>> + hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, info[i]);
>> +
>> + hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, m_PACKET_VSI_EN,
>> + v_PACKET_VSI_EN(1));
>> +
>> + return 0;
> hdmi_vendor_infoframe_init / hdmi_vendor_infoframe_pack?
>
> You can probably use the same function to upload the control packet
> too - something like:
>
> static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi, int setup_rc,
> union hdmi_infoframe *frame, u32 mask, u32 disable, u32 enable)
> {
> if (mask)
> hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);
>
> if (setup_rc >= 0) {
> u8 packed_frame[YOUR_MAXIMUM_INFO_FRAME_SIZE];
> ssize_t rc, i;
>
> rc = hdmi_infoframe_pack(frame, packed_frame,
> sizeof(packed_frame));
> if (rc < 0)
> return rc;
>
> for (i = 0; i < rc; i++)
> hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, buf[i]);
>
> if (mask)
> hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, enable);
> }
>
> return setup_rc;
> }
>
> static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi)
> {
> union hdmi_infoframe frame;
>
> rc = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
> the_drm_display_mode);
>
> return inno_hdmi_upload_frame(hdmi, rc, &frame, m_PACKET_VSI_EN,
> v_PACKET_VSI_EN(0), v_PACKET_VSI_EN(1));
> }
>
Ah.... appreciate for the code, it's great suggest, thanks.
Also I found a mistaken with previous "inno_hdmi_config_video_vsi"
function that we don't need to send the HDMI vendor infoframes if
we are not using a 4K or stereoscopic 3D mode. :)
>> +static int inno_hdmi_i2c_wait(struct inno_hdmi *hdmi)
>> +{
>> + struct inno_hdmi_i2c *i2c = hdmi->i2c;
>> + int stat;
>> +
>> + stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
>> + if (!stat) {
>> + stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
>> + if (!stat)
>> + return -EAGAIN;
> What's the reason for this double wait_for_completion? This probably
> needs a comment, otherwise it looks like some weird cut-n-paste error.
Yep, you 're right, don't need double wait here.
>> +static int inno_hdmi_i2c_write(struct inno_hdmi *hdmi, struct i2c_msg *msgs)
>> +{
>> + struct inno_hdmi_i2c *i2c = hdmi->i2c;
> You seem to have a local i2c pointer...
Ah, got it ;)
>> +
>> + /*
>> + * The DDC module only support read EDID message, so
>> + * we assume that each word write to this i2c adapter
>> + * should be the offset of EDID word address.
>> + */
>> + if ((msgs->len != 1) ||
>> + ((msgs->addr != DDC_ADDR) && (msgs->addr != DDC_SEGMENT_ADDR)))
>> + return -EINVAL;
>> +
>> + reinit_completion(&i2c->cmp);
>> +
>> + if (msgs->addr == DDC_SEGMENT_ADDR)
>> + hdmi->i2c->segment_addr = msgs->buf[0];
>> + if (msgs->addr == DDC_ADDR)
>> + hdmi->i2c->ddc_addr = msgs->buf[0];
>> +
>> + /* Set edid fifo first addr */
>> + hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
>> +
>> + /* Set edid word address 0x00/0x80 */
>> + hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
>> +
>> + /* Set edid segment pointer */
>> + hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
> but then you don't use it in the four locations above.
>
>
Thanks,
- Yakir
Powered by blists - more mailing lists