linux-kernel - Re: [RFC 1/3] ARM: dts: Add cooling levels for CPUs on exynos5420

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 17 Feb 2016 16:05:55 +0900
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Viresh Kumar <viresh.kumar@...aro.org>
Cc:	Kukjin Kim <kgene@...nel.org>,
	Lukasz Majewski <l.majewski@...sung.com>,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-pm@...r.kernel.org, Zhang Rui <rui.zhang@...el.com>,
	Eduardo Valentin <edubezval@...il.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
	Javier Martinez Canillas <javier@....samsung.com>
Subject: Re: [RFC 1/3] ARM: dts: Add cooling levels for CPUs on exynos5420

On 17.02.2016 16:01, Viresh Kumar wrote:
> On 17-02-16, 15:55, Krzysztof Kozlowski wrote:
>> On Exynos5420 we support 8 cpufreq steps (600-1300 MHz) for LITTLE and
>> 12 steps for big core (700-1800 MHz). Add respective cooling cells.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
>> ---
>>  arch/arm/boot/dts/exynos5420-cpus.dtsi | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
>> index 261d25173f61..498ae82e1cb2 100644
>> --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
>> @@ -33,6 +33,9 @@
>>  			clock-frequency = <1800000000>;
>>  			cci-control-port = <&cci_control1>;
>>  			operating-points-v2 = <&cluster_a15_opp_table>;
>> +			cooling-min-level = <0>;
>> +			cooling-max-level = <11>;
>> +			#cooling-cells = <2>; /* min followed by max */
>>  		};
>>  
>>  		cpu1: cpu@1 {
>> @@ -70,6 +73,9 @@
>>  			clock-frequency = <1000000000>;
>>  			cci-control-port = <&cci_control0>;
>>  			operating-points-v2 = <&cluster_a7_opp_table>;
>> +			cooling-min-level = <0>;
>> +			cooling-max-level = <7>;
>> +			#cooling-cells = <2>; /* min followed by max */
>>  		};
> 
> Though it wouldn't matter (for the issue you are getting), but this should be
> added for all the CPUs in case some other CPU is booted first.

Thanks! I'll fix it also for patch 2/3.

Best regards,
Krzysztof