linux-kernel - Re: [PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 26 Feb 2016 18:57:53 +0100
From:	Joachim Eastwood <manabian@...il.com>
To:	Alexandre TORGUE <alexandre.torgue@...il.com>
Cc:	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	netdev <netdev@...r.kernel.org>, devicetree@...r.kernel.org,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue

Hi Alexandre,

On 26 February 2016 at 11:51, Alexandre TORGUE
<alexandre.torgue@...il.com> wrote:
> Signed-off-by: Alexandre TORGUE <alexandre.torgue@...il.com>
>
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> new file mode 100644
> index 0000000..67fceda
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> @@ -0,0 +1,40 @@
> +STMicroelectronics STM32 / MCU DWMAC glue layer controller
> +
> +This file documents platform glue layer for stmmac.
> +Please see stmmac.txt for the other unchanged properties.
> +
> +The device node has following properties.
> +
> +Required properties:
> +- compatible:  Should be "st,stm32-dwmac" to select glue, and
> +              "snps,dwmac-3.50a" to select IP vesrion.
> +- clocks: Should contain the GMAC main clock, and tx clock
> +- compatible:  Should be "st,stm32-dwmac" to select glue and
> +              "snps,dwmac-3.50a" to select IP version.
> +- clocks: Should contain the MAC main clock
> +- clock-names: Should contain the clock names "stmmaceth".
> +- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
> +             encompases the glue register, and the offset of the control register.
> +
> +Optional properties:
> +- clocks: Could contain:
> +       - the tx clock,
> +       - the rx clock
> +- clock-names: Could contain the clock names "tx-clk", "rx-clk"
> +
> +Example:
> +
> +               ethernet0: dwmac@...28000 {
> +                       compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
> +                       status = "disabled";
> +                       reg = <0x40028000 0x8000>;
> +                       reg-names = "stmmaceth";
> +                       interrupts = <0 61 0>, <0 62 0>;
> +                       interrupt-names = "macirq", "eth_wake_irq";
> +                       clock-names = "stmmaceth", "tx-clk", "rx-clk";
> +                       clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
> +                       st,syscon = <&syscfg 0x4>;
> +                       snps,pbl = <8>;
> +                       snps,mixed-burst;
> +                       dma-ranges;
> +               };

Looks just like any other dwmac-driver binding so:

Acked-by: Joachim Eastwood <manabian@...il.com>


regards,
Joachim Eastwood