| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Mar 2016 10:46:13 +0100
From: Mathieu OTHACEHE <m.othacehe@...il.com>
To: johan@...nel.org, gregkh@...uxfoundation.org
Cc: linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Mathieu OTHACEHE <m.othacehe@...il.com>
Subject: [PATCH] usb: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support
Add support for :
- UPort 1110 : 1 port RS-232 USB to Serial Hub.
- UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
- UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
- UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
- UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
These devices are based on TI 3410 chip.
Signed-off-by: Mathieu OTHACEHE <m.othacehe@...il.com>
---
Hi,
This patch add support for MOXA UPORT 11x0 devices to ti_usb_3410_5052.
The informations are extracted from the now reverted mxu11x0 driver.
There is a delicate point in the attach callback.
The driver is comparing bNumConfigurations to 1 to see if the firmware
has to be downloaded. I guess bNumConfigurations is 2 after firmware download
and device reseting.
On MOXA 1110, bNumConfigurations is always 1, before and after firmware download.
So, I also check that the interface has only 1 endpoint to determine if we have
to download firmware or not.
Thanks,
Mathieu
drivers/usb/serial/ti_usb_3410_5052.c | 44 ++++++++++++++++++++++++++++++++---
drivers/usb/serial/ti_usb_3410_5052.h | 8 +++++++
2 files changed, 49 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 2694df2..b9119de 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -80,6 +80,7 @@ struct ti_device {
int td_open_port_count;
struct usb_serial *td_serial;
int td_is_3410;
+ int td_model;
int td_urb_error;
};
@@ -160,6 +161,11 @@ static const struct usb_device_id ti_id_table_3410[] = {
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ } /* terminator */
};
@@ -193,6 +199,11 @@ static const struct usb_device_id ti_id_table_combined[] = {
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ } /* terminator */
};
@@ -277,6 +288,11 @@ MODULE_FIRMWARE("mts_gsm.fw");
MODULE_FIRMWARE("mts_edge.fw");
MODULE_FIRMWARE("mts_mt9234mu.fw");
MODULE_FIRMWARE("mts_mt9234zba.fw");
+MODULE_FIRMWARE("moxa/moxa-1110.fw");
+MODULE_FIRMWARE("moxa/moxa-1130.fw");
+MODULE_FIRMWARE("moxa/moxa-1131.fw");
+MODULE_FIRMWARE("moxa/moxa-1150.fw");
+MODULE_FIRMWARE("moxa/moxa-1151.fw");
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait,
@@ -292,6 +308,7 @@ static int ti_startup(struct usb_serial *serial)
{
struct ti_device *tdev;
struct usb_device *dev = serial->dev;
+ struct usb_host_interface *cur_altsetting;
int status;
dev_dbg(&dev->dev,
@@ -315,8 +332,13 @@ static int ti_startup(struct usb_serial *serial)
dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
tdev->td_is_3410 ? "3410" : "5052");
- /* if we have only 1 configuration, download firmware */
- if (dev->descriptor.bNumConfigurations == 1) {
+ tdev->td_model = le16_to_cpu(dev->descriptor.idProduct);
+
+ cur_altsetting = serial->interface->cur_altsetting;
+
+ /* if we have only 1 configuration and 1 endpoint, download firmware */
+ if (dev->descriptor.bNumConfigurations == 1 &&
+ cur_altsetting->desc.bNumEndpoints == 1) {
status = ti_download_firmware(tdev);
if (status != 0)
@@ -371,7 +393,15 @@ static int ti_port_probe(struct usb_serial_port *port)
port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
tport->tp_port = port;
tport->tp_tdev = usb_get_serial_data(port->serial);
- tport->tp_uart_mode = 0; /* default is RS232 */
+
+ switch (tport->tp_tdev->td_model) {
+ case MXU1_1130_PRODUCT_ID:
+ case MXU1_1131_PRODUCT_ID:
+ tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
+ break;
+ default:
+ tport->tp_uart_mode = TI_UART_232; /* default is RS232 */
+ }
usb_set_serial_port_data(port, tport);
@@ -1479,6 +1509,14 @@ static int ti_download_firmware(struct ti_device *tdev)
strcpy(buf, "mts_mt9234zba.fw");
break; }
}
+
+ if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
+ snprintf(buf,
+ sizeof(buf),
+ "moxa/moxa-%04x.fw",
+ le16_to_cpu(dev->descriptor.idProduct));
+ }
+
if (buf[0] == '\0') {
if (tdev->td_is_3410)
strcpy(buf, "ti_3410.fw");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 98f35c6..93ac6ad 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -60,6 +60,14 @@
#define HONEYWELL_VENDOR_ID 0x10ac
#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
+/* Moxa UPORT 11x0 vendor and product IDs */
+#define MXU1_VENDOR_ID 0x110a
+#define MXU1_1110_PRODUCT_ID 0x1110
+#define MXU1_1130_PRODUCT_ID 0x1130
+#define MXU1_1150_PRODUCT_ID 0x1150
+#define MXU1_1151_PRODUCT_ID 0x1151
+#define MXU1_1131_PRODUCT_ID 0x1131
+
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
--
2.7.0
Powered by blists - more mailing lists