| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Mar 2016 09:00:18 +0100
From: Hans Verkuil <hverkuil@...all.nl>
To: Andrey Utkin <andrey.utkin@...p.bluecherry.net>
Cc: Linux Media <linux-media@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel-mentors@...enic.com" <kernel-mentors@...enic.com>,
devel@...verdev.osuosl.org,
kernel-janitors <kernel-janitors@...r.kernel.org>,
Mauro Carvalho Chehab <mchehab@....samsung.com>,
Andrey Utkin <andrey_utkin@...tmail.com>
Subject: Re: [RFC PATCH v0] Add tw5864 driver
On 03/09/2016 03:29 PM, Andrey Utkin wrote:
> Hi Hans!
>
> Some improvements took place on the driver, including cleaner
> v4l2-compliance tests passing. But there's a single test failure I
> don't understand.
>
> In the code of v4l2-compliance, it seems like an API
> call CREATE_BUFS is supposed to fail with EINVAL. But in case of my
> driver, which simply uses vb2_ioctl_create_bufs(), the call returns 0.
>
> Please review the below report.
>
> The report is produced by fresh v4l-utils from git:
> v4l-utils-1.10.0-59-g1388c0a
>
> The actual code which was tested is at tag release/tw5864/1.10 of
> https://github.com/bluecherrydvr/linux.git , see
> drivers/staging/media/tw5864 . If we sort this out, I am considering
> resubmit the driver for merging upstream.
The reason is likely to be the tw5864_queue_setup function which has not been
updated to handle CREATE_BUFS support correctly. It should look like this:
static int tw5864_queue_setup(struct vb2_queue *q,
unsigned int *num_buffers,
unsigned int *num_planes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct tw5864_input *dev = vb2_get_drv_priv(q);
if (q->num_buffers + *num_buffers < 12)
*num_buffers = 12 - q->num_buffers;
alloc_ctxs[0] = dev->alloc_ctx;
if (*num_planes)
return sizes[0] < H264_VLC_BUF_SIZE ? -EINVAL : 0;
sizes[0] = H264_VLC_BUF_SIZE;
*num_planes = 1;
return 0;
}
>
> There's also another issue with v4l2-compliance. At some moment the
> driver receives S_PARM command with timeperframe 0/0, by which reason I
> added special handling, but I guess there's something out of my
> knowledge which caused this and which should be fixed.
A timeperframe value of 0/0 is valid and the driver is supposed to replace it
with the default timeperframe. Which is why v4l2-compliance tests for this
corner case.
Regards,
Hans
>
>
> # v4l2-compliance -d /dev/video6 -s
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.5.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
> fail: v4l2-test-buffers.cpp(959): ret != EINVAL
> test MMAP: FAIL
> test USERPTR: OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
>
> Total: 45, Succeeded: 44, Failed: 1, Warnings: 0
> [ERR]
> 14:14:15root@tw ~
> # gdb v4l2-compliance
> GNU gdb (Ubuntu 7.10-1ubuntu3) 7.10
> Copyright (C) 2015 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later
> <http://gnu.org/licenses/gpl.html> This is free software: you are free
> to change and redistribute it. There is NO WARRANTY, to the extent
> permitted by law. Type "show copying" and "show warranty" for details.
> This GDB was configured as "i686-linux-gnu".
> Type "show configuration" for configuration details.
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>.
> Find the GDB manual and other documentation resources online at:
> <http://www.gnu.org/software/gdb/documentation/>.
> For help, type "help".
> Type "apropos word" to search for commands related to "word"...
> Reading symbols from v4l2-compliance...done.
> (gdb) break v4l2-test-buffers.cpp:959
> Breakpoint 1 at 0x8071469: file v4l2-test-buffers.cpp, line 959.
> (gdb) run -d /dev/video6 -s
> Starting program: /usr/local/bin/v4l2-compliance -d /dev/video6 -s
> [Thread debugging using libthread_db enabled]
> Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1".
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.5.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
>
> Breakpoint 1, testMmap (node=0xbfffd1e4, frame_count=60) at v4l2-test-buffers.cpp:959
> 959 fail_on_test(ret != EINVAL);
> (gdb) print ret
> $1 = 0
> (gdb)
>
Powered by blists - more mailing lists