| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 30 Mar 2016 19:16:24 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Paul Kocialkowski <contact@...lk.fr>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>
CC: Rob Herring <robh+dt@...nel.org>, Tony Lindgren <tony@...mide.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>
Subject: Re: [PATCH 7/8] input: misc: Add TWL6030 power button support to
twl-pwrbutton
On 03/29/2016 10:22 PM, Paul Kocialkowski wrote:
> This renames the twl4030-pwrbutton driver to twl-pwrbutton, since power button
> handling is very similar on most TWL chips. This also introduces TWL6030 power
> button support.
>
> TWL6030 power button support requires the following additional changes:
> * Devicetree binding and support
> * Interrupt unmasking and remasking support
Again. pls, do not mix clean up/beautification and adding new features.
And don't mix DT changes with code changes.
>
> Signed-off-by: Paul Kocialkowski <contact@...lk.fr>
> ---
> .../devicetree/bindings/input/twl-pwrbutton.txt | 22 ++++
> .../bindings/input/twl4030-pwrbutton.txt | 21 ---
> arch/arm/boot/dts/twl6030.dtsi | 5 +
> arch/arm/configs/omap2plus_defconfig | 2 +-
> drivers/input/misc/Kconfig | 8 +-
> drivers/input/misc/Makefile | 2 +-
> drivers/input/misc/twl-pwrbutton.c | 143 +++++++++++++++++++++
> drivers/input/misc/twl4030-pwrbutton.c | 116 -----------------
> drivers/mfd/twl-core.c | 12 +-
> include/linux/i2c/twl.h | 1 +
> 10 files changed, 187 insertions(+), 145 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/twl-pwrbutton.txt
> delete mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> create mode 100644 drivers/input/misc/twl-pwrbutton.c
> delete mode 100644 drivers/input/misc/twl4030-pwrbutton.c
>
> diff --git a/Documentation/devicetree/bindings/input/twl-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
> new file mode 100644
> index 0000000..4931be4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
> @@ -0,0 +1,22 @@
> +Texas Instruments TWL family pwrbutton module
> +
> +This module is part of a TWL chip. For more details about the whole
> +chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
> +
> +This module provides a simple power button event via an Interrupt.
> +
> +Required properties:
> +- compatible: should be one of the following
> + - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
> + - "ti,twl6030-pwrbutton": For controllers compatible with twl6030
> +- interrupts: should be one of the following
> + - <8>: For controllers compatible with the twl
> +
> +Example:
> +
> +&twl {
> + twl_pwrbutton: pwrbutton {
> + compatible = "ti,twl4030-pwrbutton";
> + interrupts = <8>;
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> deleted file mode 100644
> index c864a46..0000000
> --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -Texas Instruments TWL family (twl4030) pwrbutton module
> -
> -This module is part of the TWL4030. For more details about the whole
> -chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
> -
> -This module provides a simple power button event via an Interrupt.
> -
> -Required properties:
> -- compatible: should be one of the following
> - - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
> -- interrupts: should be one of the following
> - - <8>: For controllers compatible with twl4030
> -
> -Example:
> -
> -&twl {
> - twl_pwrbutton: pwrbutton {
> - compatible = "ti,twl4030-pwrbutton";
> - interrupts = <8>;
> - };
> -};
> diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
> index 55eb35f..6a52df1 100644
> --- a/arch/arm/boot/dts/twl6030.dtsi
> +++ b/arch/arm/boot/dts/twl6030.dtsi
> @@ -99,4 +99,9 @@
> compatible = "ti,twl6030-pwmled";
> #pwm-cells = <2>;
> };
> +
> + twl_pwrbutton: pwrbutton {
> + compatible = "ti,twl6030-pwrbutton";
> + interrupts = <0>;
> + };
> };
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index 156bc88..ff9752a 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -217,7 +217,7 @@ CONFIG_TOUCHSCREEN_TSC2007=m
> CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_TPS65218_PWRBUTTON=m
> -CONFIG_INPUT_TWL4030_PWRBUTTON=m
> +CONFIG_INPUT_TWL_PWRBUTTON=m
> CONFIG_INPUT_PALMAS_PWRBUTTON=m
> CONFIG_SERIO=m
> # CONFIG_LEGACY_PTYS is not set
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 6abb6df..f643e14 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -459,15 +459,15 @@ config INPUT_AXP20X_PEK
> be called axp20x-pek.
>
>
> -config INPUT_TWL4030_PWRBUTTON
> - tristate "TWL4030 Power button Driver"
> +config INPUT_TWL_PWRBUTTON
> + tristate "TWL Power button Driver"
> depends on TWL_CORE
> help
> Say Y here if you want to enable power key reporting via the
> - TWL4030 family of chips.
> + TWL family of chips.
>
> To compile this driver as a module, choose M here. The module will
> - be called twl4030_pwrbutton.
> + be called twl_pwrbutton.
>
> config INPUT_TWL4030_VIBRA
> tristate "Support for TWL4030 Vibrator"
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 0357a08..f77f5e7 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -66,7 +66,7 @@ obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
> obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
> -obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
> +obj-$(CONFIG_INPUT_TWL_PWRBUTTON) += twl-pwrbutton.o
> obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
> obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o
> obj-$(CONFIG_INPUT_UINPUT) += uinput.o
> diff --git a/drivers/input/misc/twl-pwrbutton.c b/drivers/input/misc/twl-pwrbutton.c
> new file mode 100644
> index 0000000..a7bc8ad
> --- /dev/null
> +++ b/drivers/input/misc/twl-pwrbutton.c
> @@ -0,0 +1,143 @@
> +/**
> + * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
> + *
> + * Copyright (C) 2008-2009 Nokia Corporation
> + *
> + * Written by Peter De Schrijver <peter.de-schrijver@...ia.com>
> + * Several fixes by Felipe Balbi <felipe.balbi@...ia.com>
> + *
> + * This file is subject to the terms and conditions of the GNU General
> + * Public License. See the file "COPYING" in the main directory of this
> + * archive for more details.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/i2c/twl.h>
> +
> +#define PWR_PWRON_IRQ (1 << 0)
> +
> +#define TWL4030_STS_HW_CONDITIONS 0x0f
> +#define TWL6030_STS_HW_CONDITIONS 0x21
> +
> +static irqreturn_t powerbutton_irq(int irq, void *_pwr)
> +{
> + struct input_dev *pwr = _pwr;
> + int err;
> + u8 value;
> +
> + if (twl_class_is_4030())
one of the benefits of using DT is that we can get rid of code
like above - compatible string should provide enough info.
> + err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value,
> + TWL4030_STS_HW_CONDITIONS);
> + else
> + err = twl_i2c_read_u8(TWL6030_MODULE_ID0, &value,
> + TWL6030_STS_HW_CONDITIONS);
> +
> + if (!err) {
> + pm_wakeup_event(pwr->dev.parent, 0);
> + input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
> + input_sync(pwr);
> + } else {
> + dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
> + " TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int twl_pwrbutton_probe(struct platform_device *pdev)
> +{
> + struct input_dev *pwr;
> + int irq = platform_get_irq(pdev, 0);
It may fail ?! and return -EPROBE_DEFER
> + int err;
> +
> + pwr = devm_input_allocate_device(&pdev->dev);
> + if (!pwr) {
> + dev_err(&pdev->dev, "Can't allocate power button\n");
> + return -ENOMEM;
> + }
> +
> + pwr->evbit[0] = BIT_MASK(EV_KEY);
> + pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
> + pwr->name = "twl_pwrbutton";
> + pwr->phys = "twl_pwrbutton/input0";
> + pwr->dev.parent = &pdev->dev;
> +
> + if (twl_class_is_6030()) {
> + twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
> + REG_INT_MSK_LINE_A);
> + twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
> + REG_INT_MSK_STS_A);
Seems it's time to update twl6030-irq.c and add enable_irq()/disable_irq() functionality.
> + }
> +
> + err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
> + IRQF_ONESHOT,
> + "twl_pwrbutton", pwr);
> + if (err < 0) {
> + dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
> + return err;
> + }
> +
> + err = input_register_device(pwr);
> + if (err) {
> + dev_err(&pdev->dev, "Can't register power button: %d\n", err);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, pwr);
> + device_init_wakeup(&pdev->dev, true);
> +
> + return 0;
> +}
> +
> +static int twl_pwrbutton_remove(struct platform_device *pdev)
> +{
> + if (twl_class_is_6030()) {
> + twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
> + REG_INT_MSK_LINE_A);
> + twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
> + REG_INT_MSK_STS_A);
> + }
device_init_wakeup(&pdev->dev, 0);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id twl_pwrbutton_dt_match_table[] = {
> + { .compatible = "ti,twl4030-pwrbutton" },
> + { .compatible = "ti,twl6030-pwrbutton" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, twl_pwrbutton_dt_match_table);
> +#endif
> +
> +static struct platform_driver twl_pwrbutton_driver = {
> + .probe = twl_pwrbutton_probe,
> + .remove = twl_pwrbutton_remove,
> + .driver = {
> + .name = "twl_pwrbutton",
> + .of_match_table = of_match_ptr(twl_pwrbutton_dt_match_table),
> + },
> +};
> +module_platform_driver(twl_pwrbutton_driver);
> +
> +MODULE_ALIAS("platform:twl_pwrbutton");
> +MODULE_DESCRIPTION("TWL Power Button");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@...ia.com>");
> +MODULE_AUTHOR("Felipe Balbi <felipe.balbi@...ia.com>");
> diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
> deleted file mode 100644
> index 603fc2f..0000000
> --- a/drivers/input/misc/twl4030-pwrbutton.c
> +++ /dev/null
> @@ -1,116 +0,0 @@
> -/**
> - * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
> - *
> - * Copyright (C) 2008-2009 Nokia Corporation
> - *
> - * Written by Peter De Schrijver <peter.de-schrijver@...ia.com>
> - * Several fixes by Felipe Balbi <felipe.balbi@...ia.com>
> - *
> - * This file is subject to the terms and conditions of the GNU General
> - * Public License. See the file "COPYING" in the main directory of this
> - * archive for more details.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - */
> -
> -#include <linux/module.h>
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/input.h>
> -#include <linux/interrupt.h>
> -#include <linux/platform_device.h>
> -#include <linux/i2c/twl.h>
> -
> -#define PWR_PWRON_IRQ (1 << 0)
> -
> -#define STS_HW_CONDITIONS 0xf
> -
> -static irqreturn_t powerbutton_irq(int irq, void *_pwr)
> -{
> - struct input_dev *pwr = _pwr;
> - int err;
> - u8 value;
> -
> - err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value, STS_HW_CONDITIONS);
> - if (!err) {
> - pm_wakeup_event(pwr->dev.parent, 0);
> - input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
> - input_sync(pwr);
> - } else {
> - dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
> - " TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
> - }
> -
> - return IRQ_HANDLED;
> -}
> -
> -static int twl4030_pwrbutton_probe(struct platform_device *pdev)
> -{
> - struct input_dev *pwr;
> - int irq = platform_get_irq(pdev, 0);
> - int err;
> -
> - pwr = devm_input_allocate_device(&pdev->dev);
> - if (!pwr) {
> - dev_err(&pdev->dev, "Can't allocate power button\n");
> - return -ENOMEM;
> - }
> -
> - pwr->evbit[0] = BIT_MASK(EV_KEY);
> - pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
> - pwr->name = "twl4030_pwrbutton";
> - pwr->phys = "twl4030_pwrbutton/input0";
> - pwr->dev.parent = &pdev->dev;
> -
> - err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
> - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
> - IRQF_ONESHOT,
> - "twl4030_pwrbutton", pwr);
> - if (err < 0) {
> - dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
> - return err;
> - }
> -
> - err = input_register_device(pwr);
> - if (err) {
> - dev_err(&pdev->dev, "Can't register power button: %d\n", err);
> - return err;
> - }
> -
> - platform_set_drvdata(pdev, pwr);
> - device_init_wakeup(&pdev->dev, true);
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_OF
> -static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
> - { .compatible = "ti,twl4030-pwrbutton" },
> - {},
> -};
> -MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
> -#endif
> -
> -static struct platform_driver twl4030_pwrbutton_driver = {
> - .probe = twl4030_pwrbutton_probe,
> - .driver = {
> - .name = "twl4030_pwrbutton",
> - .of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
> - },
> -};
> -module_platform_driver(twl4030_pwrbutton_driver);
> -
> -MODULE_ALIAS("platform:twl4030_pwrbutton");
> -MODULE_DESCRIPTION("Triton2 Power Button");
> -MODULE_LICENSE("GPL");
> -MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@...ia.com>");
> -MODULE_AUTHOR("Felipe Balbi <felipe.balbi@...ia.com>");
> -
> diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
> index 74372bc..a1bfe23 100644
> --- a/drivers/mfd/twl-core.c
> +++ b/drivers/mfd/twl-core.c
> @@ -848,13 +848,21 @@ add_children(struct twl_platform_data *pdata, unsigned irq_base,
> return PTR_ERR(child);
> }
>
> - if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) {
> - child = add_child(TWL_MODULE_PM_MASTER, "twl4030_pwrbutton",
> + if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_4030()) {
> + child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
> NULL, 0, true, irq_base + 8 + 0, 0);
> if (IS_ERR(child))
> return PTR_ERR(child);
> }
>
> + if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_6030()) {
> + child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
> + NULL, 0, true, irq_base + 0, 0);
> + if (IS_ERR(child))
> + return PTR_ERR(child);
> + }
> +
no legacy code for twl6030 pls
> +
> if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio &&
> twl_class_is_4030()) {
> child = add_child(TWL4030_MODULE_AUDIO_VOICE, "twl4030-audio",
> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> index 2decb190..20d33b7 100644
> --- a/include/linux/i2c/twl.h
> +++ b/include/linux/i2c/twl.h
> @@ -127,6 +127,7 @@ enum twl6030_module_ids {
> #define REG_INT_MSK_STS_C 0x08
>
> /* MASK INT REG GROUP A */
> +#define TWL6030_PWRON_INT_MASK 0x01
> #define TWL6030_PWR_INT_MASK 0x07
> #define TWL6030_RTC_INT_MASK 0x18
> #define TWL6030_HOTDIE_INT_MASK 0x20
>
--
regards,
-grygorii
Powered by blists - more mailing lists