linux-kernel - Re: [PATCH 01/11] ARM: dts: exynos: Fix DTC unit name warnings in cros-adc-thermistors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Sun, 3 Apr 2016 12:46:15 +0900
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Rob Herring <robh+dt@...nel.org>
Cc:	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Kukjin Kim <kgene@...nel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-samsung-soc@...r.kernel.org" 
	<linux-samsung-soc@...r.kernel.org>
Subject: Re: [PATCH 01/11] ARM: dts: exynos: Fix DTC unit name warnings in
 cros-adc-thermistors

On Fri, Apr 01, 2016 at 10:31:34AM -0500, Rob Herring wrote:
> On Fri, Apr 1, 2016 at 1:57 AM, Krzysztof Kozlowski
> <k.kozlowski@...sung.com> wrote:
> > Fix following DTC warnings in cros-adc-thermistors:
> > Warning (unit_address_vs_reg): Node /adc@...10000/ncp15wb473@3 has a unit name, but no reg property
> > Warning (unit_address_vs_reg): Node /adc@...10000/ncp15wb473@4 has a unit name, but no reg property
> > Warning (unit_address_vs_reg): Node /adc@...10000/ncp15wb473@5 has a unit name, but no reg property
> > Warning (unit_address_vs_reg): Node /adc@...10000/ncp15wb473@6 has a unit name, but no reg property
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> > ---
> >  arch/arm/boot/dts/cros-adc-thermistors.dtsi | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
> > index acd4fe1833f2..87e676917603 100644
> > --- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi
> > +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
> > @@ -13,28 +13,28 @@
> >  */
> >
> >  &adc {
> > -       ncp15wb473@3 {
> > +       ncp15wb473_3 {
> 
> Don't use underscores.

The ePAPR lists underscore as a acceptable character... but if you
insists then the sensible solution would be to rename all the nodes to
something like:
-       ncp15wb473@3 {
+       thermistor3 {

Is it okay?

> 
> >                 compatible = "murata,ncp15wb473";
> >                 pullup-uv = <1800000>;
> >                 pullup-ohm = <47000>;
> >                 pulldown-ohm = <0>;
> >                 io-channels = <&adc 3>;
> 
> I've not looked at the full binding here, but this case may warrant
> adding a reg property as an ADC channel number is what i'd consider an
> addressable thing.

This does not look entirely as an addressable thing. Altough this
particular driver (ntc_thermistor.c) uses one iio-channel... but others
are often using more than one.

> This is also kind of strange having a phandle to
> the parent node.

The Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
mentions that sensors can be added as child nodes or separately. The
exynos_adc driver indeed calls of_platform_populate() but I am not sure
why this was added.

Best regards,
Krzysztof