[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 4 Apr 2016 00:16:47 -0500
From: Rob Herring <robh@...nel.org>
To: Guodong Xu <guodong.xu@...aro.org>
Cc: xuwei5@...ilicon.com, mark.rutland@....com,
grant.likely@...retlab.ca, linus.walleij@...aro.org,
arnd.bergmann@...aro.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
kong.kongxinwei@...ilicon.com
Subject: Re: [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for
working with mezzanine boards
On Sat, Apr 02, 2016 at 05:29:35PM +0800, Guodong Xu wrote:
> Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 5c9ee31..e00e9ec 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -42,6 +42,15 @@
> <0x00000000 0x06e00000 0x00000000 0x0060f000>,
> <0x00000000 0x07410000 0x00000000 0x36bf0000>;
> };
> +
> + soc {
> + i2c0: i2c@...00000 {
> + status = "ok";
> + };
> + i2c1: i2c@...01000 {
> + status = "ok";
> + };
Do these go to LS connector? If so, add 'label = "LS-I2C0";' or LS-I2C1
as appropriate (based on LS connector numbering).
Rob
Powered by blists - more mailing lists