linux-kernel - Re: 4.4, 4.6: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 7 Apr 2016 16:41:34 -0700
From:	Tony Lindgren <tony@...mide.com>
To:	Pavel Machek <pavel@....cz>
Cc:	pali.rohar@...il.com, sre@...nel.org,
	kernel list <linux-kernel@...r.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
	linux-omap@...r.kernel.org, khilman@...nel.org,
	aaro.koskinen@....fi, ivo.g.dimitrov.75@...il.com,
	patrikbachan@...il.com, serge@...lyn.com
Subject: Re: 4.4, 4.6: camera and unlock buttons produce tons of interrupts
 (was Re: N900 sleep mode)

* Pavel Machek <pavel@....cz> [160407 16:02]:
> Hi!
> 
> > > gzipped config is attached.
> > > 
> > > Note that I'm still using NOLO. I enabled the sleep, then went to
> > > runlevel 1. LEDs still stay on, 55mA power consumption. That was with
> > > 1 in off_mode.
> > 
> > Nothing idling for me with your .config.. And it seems slower to boot
> > compared to omap2plus_defconfig? Maybe because of the extra GPIO
> > interrupts?
> 
> Extra interrupts only happen when enable_off_mode is 1, so that should
> not be an issue during boot.

OK maybe it's just the extra driver probe time then.

> > Looks like you have 117 additional entries in .config enabled compared
> > to omap2plus_defconfig. Maybe go back to omap2plus_defconfig with minimal
> > changes and verify it idles properly first?
> > 
> > I'm suspecting it's some driver(s) you have enabled causing the
> > issue.
> 
> I guess so. Do you (or anyone else) have minimum non-modular config
> for N900 that boots with video? Could I get lsmod from your system?
> (Yes, I still have nightmares from getting .config that works).

Well I've been just using omap2plus_defconfig with:

# modprobe tsc2005
# modprobe gpio_backlight
# modprobe panel_sony_acx565akm
# modprobe omapfb

# echo 255 > /sys/class/backlight/acx565akm/brightness

And then the following to blank for idle:

# echo 1 > /sys/devices/platform/omapfb/graphics/fb0/blank

But in the world of eternal regressions, I'm not seeing anything
on the framebuffer with v4.6-rc2 :( No idea what broke it or when
as my n900 is in the rack.

Anyways, below is also my lsmod output.

Regards,

Tony


Module                  Size  Used by
panel_sharp_ls037v7dw01     4148  0
ads7846                12959  0
hwmon                   4213  1 ads7846
gpio_keys               9053  0
twl4030_keypad          3896  0
matrix_keymap           2801  1 twl4030_keypad
omapfb                 39255  1
cfbfillrect             3614  1 omapfb
cfbimgblt               2416  1 omapfb
cfbcopyarea             3187  1 omapfb
panel_sony_acx565akm     7895  1
omapdss               269684  4 panel_sharp_ls037v7dw01,omapfb,panel_sony_acx565akm
gpio_backlight          2804  0
tsc2005                 1782  0
tsc200x_core            7337  1 tsc2005
ledtrig_default_on      1119  0
leds_gpio               3530  0
led_class               5418  1 leds_gpio
rtc_twl                 6234  0
twl4030_wdt             2711  0