linux-kernel - [PATCH v4 13/16] arm64: dts: add LED nodes for hi6220-hikey

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 13 Apr 2016 07:55:49 +0800
From:	Guodong Xu <guodong.xu@...aro.org>
To:	xuwei5@...ilicon.com, robh+dt@...nel.org, pawel.moll@....com,
	mark.rutland@....com, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org, catalin.marinas@....com, will.deacon@....com,
	haojian.zhuang@...aro.org, linus.walleij@...aro.org,
	tony@...mide.com
Cc:	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v4 13/16] arm64: dts: add LED nodes for hi6220-hikey

Add LED nodes for hi6220-hikey. There are total 6 LEDs on HiKey.
Four general purposed, one for WiFi activity, and one for Bluetooth
activity.

Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 41 ++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 30c92bd..b7c41f8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -66,6 +66,47 @@
 			status = "ok";
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		user_led4 {
+			label = "user_led4";
+			gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led3 {
+			label = "user_led3";
+			gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led2 {
+			label = "user_led2";
+			gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
+			linux,default-trigger = "cpu0";
+		};
+
+		wlan_active_led {
+			label = "wifi_active";
+			gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "bt_active";
+			gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
+			linux,default-trigger = "hci0rx";
+			default-state = "off";
+		};
+	};
 };
 
 &uart2 {
-- 
1.9.1