| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 May 2016 14:49:17 +0100
From: Ian Abbott <abbotti@....co.uk>
To: devel@...verdev.osuosl.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hsweeten@...ionengravers.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 15/20] staging: comedi: drivers: re-do PLX PCI 9080 DMADPRx register values
Replace the existing macros in "plx9080.h" that define values for the
DMADPR0 and DMADPR1 registers. (A little-endian version of the register
value is also placed in the `next` member of `struct plx_dma_desc`.)
Use the prefix `PLX_DMADPR_` for the macros. Make use of the `BIT(x)`
and `GENMASK(h,l)` macros to define the values.
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 22 +++++++++++-----------
drivers/staging/comedi/drivers/gsc_hpdi.c | 8 ++++----
drivers/staging/comedi/drivers/plx9080.h | 17 ++++++++++-------
3 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 48aca06..a4d10a3 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1534,8 +1534,8 @@ static int alloc_and_init_dma_members(struct comedi_device *dev)
cpu_to_le32((devpriv->ai_dma_desc_bus_addr +
((i + 1) % ai_dma_ring_count(board)) *
sizeof(devpriv->ai_dma_desc[0])) |
- PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
- PLX_XFER_LOCAL_TO_PCI);
+ PLX_DMADPR_DESCPCI | PLX_DMADPR_TCINTR |
+ PLX_DMADPR_XFERL2P);
}
if (ao_cmd_is_supported(board)) {
for (i = 0; i < AO_DMA_RING_COUNT; i++) {
@@ -1549,8 +1549,8 @@ static int alloc_and_init_dma_members(struct comedi_device *dev)
cpu_to_le32((devpriv->ao_dma_desc_bus_addr +
((i + 1) % (AO_DMA_RING_COUNT)) *
sizeof(devpriv->ao_dma_desc[0])) |
- PLX_DESC_IN_PCI_BIT |
- PLX_INTR_TERM_COUNT);
+ PLX_DMADPR_DESCPCI |
+ PLX_DMADPR_TCINTR);
}
}
return 0;
@@ -2634,9 +2634,9 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* give location of first dma descriptor */
load_first_dma_descriptor(dev, 1,
devpriv->ai_dma_desc_bus_addr |
- PLX_DESC_IN_PCI_BIT |
- PLX_INTR_TERM_COUNT |
- PLX_XFER_LOCAL_TO_PCI);
+ PLX_DMADPR_DESCPCI |
+ PLX_DMADPR_TCINTR |
+ PLX_DMADPR_XFERL2P);
dma_start_sync(dev, 1);
}
@@ -2918,7 +2918,7 @@ static void restart_ao_dma(struct comedi_device *dev)
unsigned int dma_desc_bits;
dma_desc_bits = readl(devpriv->plx9080_iobase + PLX_REG_DMADPR0);
- dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT;
+ dma_desc_bits &= ~PLX_DMADPR_CHAINEND;
load_first_dma_descriptor(dev, 0, dma_desc_bits);
dma_start_sync(dev, 0);
@@ -2959,14 +2959,14 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
devpriv->ao_dma_desc[buffer_index].transfer_size = cpu_to_le32(nbytes);
/* set end of chain bit so we catch underruns */
next_bits = le32_to_cpu(devpriv->ao_dma_desc[buffer_index].next);
- next_bits |= PLX_END_OF_CHAIN_BIT;
+ next_bits |= PLX_DMADPR_CHAINEND;
devpriv->ao_dma_desc[buffer_index].next = cpu_to_le32(next_bits);
/*
* clear end of chain bit on previous buffer now that we have set it
* for the last buffer
*/
next_bits = le32_to_cpu(devpriv->ao_dma_desc[prev_buffer_index].next);
- next_bits &= ~PLX_END_OF_CHAIN_BIT;
+ next_bits &= ~PLX_DMADPR_CHAINEND;
devpriv->ao_dma_desc[prev_buffer_index].next = cpu_to_le32(next_bits);
devpriv->ao_dma_index = (buffer_index + 1) % AO_DMA_RING_COUNT;
@@ -3310,7 +3310,7 @@ static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
set_dac_select_reg(dev, cmd);
set_dac_interval_regs(dev, cmd);
load_first_dma_descriptor(dev, 0, devpriv->ao_dma_desc_bus_addr |
- PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT);
+ PLX_DMADPR_DESCPCI | PLX_DMADPR_TCINTR);
set_dac_control1_reg(dev, cmd);
s->async->inttrig = ao_inttrig;
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index d63dc46..f2f1874 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -310,8 +310,8 @@ static int gsc_hpdi_cmd(struct comedi_device *dev,
writel(0, devpriv->plx9080_mmio + PLX_REG_DMALADR0);
/* give location of first dma descriptor */
- bits = devpriv->dma_desc_phys_addr | PLX_DESC_IN_PCI_BIT |
- PLX_INTR_TERM_COUNT | PLX_XFER_LOCAL_TO_PCI;
+ bits = devpriv->dma_desc_phys_addr | PLX_DMADPR_DESCPCI |
+ PLX_DMADPR_TCINTR | PLX_DMADPR_XFERL2P;
writel(bits, devpriv->plx9080_mmio + PLX_REG_DMADPR0);
/* enable dma transfer */
@@ -422,8 +422,8 @@ static int gsc_hpdi_setup_dma_descriptors(struct comedi_device *dev,
{
struct hpdi_private *devpriv = dev->private;
dma_addr_t phys_addr = devpriv->dma_desc_phys_addr;
- u32 next_bits = PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
- PLX_XFER_LOCAL_TO_PCI;
+ u32 next_bits = PLX_DMADPR_DESCPCI | PLX_DMADPR_TCINTR |
+ PLX_DMADPR_XFERL2P;
unsigned int offset = 0;
unsigned int idx = 0;
unsigned int i;
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 99c075c..2fe1a4d 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -513,13 +513,16 @@ struct plx_dma_desc {
#define PLX_REG_DMADPR0 0x0090
#define PLX_REG_DMADPR1 0x00a4
-/* descriptor is located in pci space (not local space) */
-#define PLX_DESC_IN_PCI_BIT 0x1
-#define PLX_END_OF_CHAIN_BIT 0x2 /* end of chain bit */
-/* interrupt when this descriptor's transfer is finished */
-#define PLX_INTR_TERM_COUNT 0x4
-/* transfer from local to pci bus (not pci to local) */
-#define PLX_XFER_LOCAL_TO_PCI 0x8
+/* Descriptor Located In PCI Address Space (not local address space) */
+#define PLX_DMADPR_DESCPCI BIT(0)
+/* End Of Chain */
+#define PLX_DMADPR_CHAINEND BIT(1)
+/* Interrupt After Terminal Count */
+#define PLX_DMADPR_TCINTR BIT(2)
+/* Direction Of Transfer Local Bus To PCI (not PCI to local) */
+#define PLX_DMADPR_XFERL2P BIT(3)
+/* Next Descriptor Address Bits 31:4 (16 byte boundary) */
+#define PLX_DMADPR_NEXT_MASK GENMASK(31, 4)
/* DMA Channel N Command/Status Register (N <= 1) (8-bit) */
#define PLX_REG_DMACSR(n) ((n) ? PLX_REG_DMACSR1 : PLX_REG_DMACSR0)
--
2.8.1
Powered by blists - more mailing lists