linux-kernel - Re: [PATCH v3 12/12] sh: add device tree source for J2 FPGA on Mimas v2 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 25 May 2016 19:15:25 -0400
From:	Rich Felker <dalias@...c.org>
To:	Mark Rutland <mark.rutland@....com>
Cc:	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-sh@...r.kernel.org,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Pawel Moll <pawel.moll@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Yoshinori Sato <ysato@...rs.sourceforge.jp>
Subject: Re: [PATCH v3 12/12] sh: add device tree source for J2 FPGA on Mimas
 v2  board

On Wed, May 25, 2016 at 11:33:50AM +0100, Mark Rutland wrote:
> On Wed, May 25, 2016 at 05:43:03AM +0000, Rich Felker wrote:
> > Signed-off-by: Rich Felker <dalias@...c.org>
> > ---
> >  arch/sh/boot/dts/j2_mimas_v2.dts | 87 ++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 87 insertions(+)
> >  create mode 100755 arch/sh/boot/dts/j2_mimas_v2.dts
> > 
> > diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts
> > new file mode 100755
> > index 0000000..4a66cda
> > --- /dev/null
> > +++ b/arch/sh/boot/dts/j2_mimas_v2.dts
> > @@ -0,0 +1,87 @@
> > +/dts-v1/;
> > +
> > +/ {
> > +	compatible = "jcore,j2-soc";
> > +	model = "J2 FPGA SoC on Mimas v2 board";
> > +
> > +	#address-cells = <1>;
> > +	#size-cells = <1>;
> > +
> > +	interrupt-parent = <&aic>;
> > +
> > +	cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "jcore,j2";
> > +			reg = < 0 >;
> > +			clock-frequency = < 50000000 >;
> 
> Nit: please remove the spacing around the '<' and '>' here. If nothing
> else, it's inconsistent with the rest of this file.
> 
> > +		};
> > +	};
> > +
> > +	memory@...00000 {
> > +		device_type = "memory";
> > +		reg = < 0x10000000 0x4000000 >;
> > +	};
> 
> Likewise.

OK, I'll change both of these.

> > +
> > +	chosen {
> > +		stdout-path = "/soc@...d0000/serial@100";
> > +	};
> 
> Please use a label for the serial node, have an alias, and describe the
> pre-configured rate per the stdout-path binding, e.g.

Per Documentation/devicetree/bindings/xilinx.txt, current-speed is a
required property for "xlnx,xps-uartlite-1.00.a". Note that uartlite
does not actually have a programmable baud rate; the property is
instead being used to describe the hardware-provided rate.

BTW our uartlite is not actually derived from Xilinx's IP core, just
interface-compatible with it, so I'd actually like to add a
"jcore,uartlite" binding too in order to express this, with
"xlnx,xps-uartlite-1.00.a" as the fallback compatible-tag. I'll
propose that as a separate patch later.

Rich