[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 6 Jun 2016 20:51:24 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: Aleksei Mamlin <mamlinav@...il.com>
Cc: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: Re: [PATCH 7/7] ARM: dts: sun7i: Enable NAND on Wexler TAB7200
On Mon, 6 Jun 2016 13:24:24 +0300
Aleksei Mamlin <mamlinav@...il.com> wrote:
> Enable the NFC and describe the NAND flash connected to this controller.
>
> Signed-off-by: Aleksei Mamlin <mamlinav@...il.com>
Reviewed-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> ---
> arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 41 ++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> index 2f6b21a..42aff91 100644
> --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> @@ -159,6 +159,47 @@
> status = "okay";
> };
>
> +&nfc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&nand_pins_a>, <&nand_cs0_pins_a>, <&nand_rb0_pins_a>;
> + status = "okay";
> +
> + nand@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0>;
> + allwinner,rb = <0>;
> +
> + nand-ecc-mode = "hw";
> + nand-on-flash-bbt;
> +
> + boot0@0 {
> + label = "boot0";
> + reg = /bits/ 64 <0x0 0x200000>;
> + };
> +
> + boot0-rescue@...000 {
> + label = "boot0-rescue";
> + reg = /bits/ 64 <0x200000 0x200000>;
> + };
> +
> + uboot@...000 {
> + label = "uboot";
> + reg = /bits/ 64 <0x400000 0x200000>;
> + };
> +
> + uboot-rescue@...000 {
> + label = "uboot-rescue";
> + reg = /bits/ 64 <0x600000 0x200000>;
> + };
> +
> + main@...000 {
> + label = "main";
> + reg = /bits/ 64 <0x800000 0xff800000>;
> + };
> + };
> +};
> +
> &ohci0 {
> status = "okay";
> };
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Powered by blists - more mailing lists