[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 6 Jun 2016 22:31:38 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: Aleksei Mamlin <mamlinav@...il.com>
Cc: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: Re: [PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids
table
On Mon, 6 Jun 2016 22:59:03 +0300
Aleksei Mamlin <mamlinav@...il.com> wrote:
> On Mon, 6 Jun 2016 20:55:49 +0200
> Boris Brezillon <boris.brezillon@...e-electrons.com> wrote:
>
> > On Mon, 6 Jun 2016 13:24:22 +0300
> > Aleksei Mamlin <mamlinav@...il.com> wrote:
> >
> > > Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the
> > > nand_ids table so that we can later use the NAND ECC infos and ONFI timings
> > > mode in controller drivers.
> >
> > Still hoping to get this series [1] merged in 4.8, but if that's
> > not the case, I'll apply your patch.
> >
> > BTW, that would be great if you could test it on your platforms.
> >
>
> It seems that Hynix-specific initialization code can't handle H27UBG8T2BTR-BC
> chip:
>
> [ 0.886153] nand: Could not find valid ONFI parameter page; aborting
> [ 0.892665] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xd7
> [ 0.899025] nand: Hynix 1c03000.nand
> [ 0.902596] nand: bus width 8 instead 16 bit
> [ 0.906858] nand: No NAND device found
> [ 0.910620] sunxi_nand 1c03000.nand: failed to init nand chips
> [ 0.916528] sunxi_nand: probe of 1c03000.nand failed with error -22
Can you try this patch? It should fix the problem [1].
[1]http://code.bulix.org/6hjww1-100494
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Powered by blists - more mailing lists