linux-kernel - [PATCH v3 01/14] dt-bindings: sunxi: Add CCU binding documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 29 Jun 2016 21:05:22 +0200
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	Mike Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Chen-Yu Tsai <wens@...e.org>
Cc:	linux-clk@...r.kernel.org, Hans de Goede <hdegoede@...hat.com>,
	Boris Brezillon <boris.brezillon@...e-electrons.com>,
	Rob Herring <robh+dt@...nel.org>,
	Vishnu Patekar <vishnupatekar0510@...il.com>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, Jean-Francois Moine <moinejf@...e.fr>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH v3 01/14] dt-bindings: sunxi: Add CCU binding documentation

Introduce a new binding with its documentation for the brand new clock
sub-framework.

Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
 .../devicetree/bindings/clock/sunxi-ccu.txt        | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
new file mode 100644
index 000000000000..cb91507ffb1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -0,0 +1,24 @@
+Allwinner Clock Control Unit Binding
+------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatible:
+		- "allwinner,sun8i-h3-ccu"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the oscillators feeding the CCU. Two are needed:
+  - "hosc": the high frequency oscillator (usually at 24MHz)
+  - "losc": the low frequency oscillator (usually at 32kHz)
+- clock-names: Must contain the clock names described just above
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+ccu: clock@...20000 {
+	compatible = "allwinner,sun8i-h3-ccu";
+	reg = <0x01c20000 0x400>;
+	clocks = <&osc24M>, <&osc32k>;
+	clock-names = "hosc", "losc";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
-- 
2.9.0