linux-kernel - Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 30 Jun 2016 13:13:48 +0200
From:	Michal Suchanek <hramrach@...il.com>
To:	megous@...ous.com
Cc:	dev <dev@...ux-sunxi.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	Rob Herring <robh+dt@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	Russell King <linux@...linux.org.uk>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Chen-Yu Tsai <wens@...e.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@...r.kernel.org>,
	open list <linux-kernel@...r.kernel.org>
Subject: Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on
 Orange Pi One

Hello,

On 25 June 2016 at 05:45,  <megous@...ous.com> wrote:
> From: Ondrej Jirman <megous@...ous.com>
>
> Use Xulong Orange Pi One GPIO based regulator for
> passive cooling and thermal management.
>
> Signed-off-by: Ondrej Jirman <megous@...ous.com>
> ---
>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 39 +++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> index b1bd6b0..a38d871 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> @@ -109,6 +109,45 @@
>         };
>  };
>
> +&cpu0 {
> +       operating-points = <
> +               /* kHz    uV */
> +               1296000 1300000
> +               1200000 1300000

First problem is that the board boots at 1008000 which is not listed
and the kernel complains.

Second problem is that the board locks up during boot with this enabled.

Do you have some suggestion for alternate configuration to test?

Thanks

Michal