lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 07 Jul 2016 12:01:47 +0200
From:	Mark Brown <broonie@...nel.org>
To:	Alexander Shiyan <shc_work@...l.ru>
Cc:	Arnd Bergmann <arnd@...db.de>, Mark Brown <broonie@...nel.org>,
	Mark Brown <broonie@...nel.org>, linux-spi@...r.kernel.org,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Arnd Bergmann <arnd@...db.de>, linux-kernel@...r.kernel.org,
	linux-spi@...r.kernel.org
Subject: Applied "spi: clps711x: Driver refactor" to the spi tree

The patch

   spi: clps711x: Driver refactor

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 6acaadc852f10b9f13b665a5798d4f2783317f80 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@...l.ru>
Date: Wed, 6 Jul 2016 16:53:12 +0200
Subject: [PATCH] spi: clps711x: Driver refactor

This is a complex patch for refactoring CLPS711X SPI driver.
This change adds devicetree support and removes board support.

Signed-off-by: Alexander Shiyan <shc_work@...l.ru>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 drivers/spi/spi-clps711x.c | 69 +++++++++++++++++-----------------------------
 1 file changed, 26 insertions(+), 43 deletions(-)

diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index 8c30de0315e7..18193df2eba8 100644
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -1,7 +1,7 @@
 /*
  *  CLPS711X SPI bus driver
  *
- *  Copyright (C) 2012-2014 Alexander Shiyan <shc_work@...l.ru>
+ *  Copyright (C) 2012-2016 Alexander Shiyan <shc_work@...l.ru>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,7 +12,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -20,9 +19,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/clps711x.h>
 #include <linux/spi/spi.h>
-#include <linux/platform_data/spi-clps711x.h>
 
-#define DRIVER_NAME	"spi-clps711x"
+#define DRIVER_NAME		"clps711x-spi"
 
 #define SYNCIO_FRMLEN(x)	((x) << 8)
 #define SYNCIO_TXFRMEN		(1 << 14)
@@ -40,6 +38,17 @@ struct spi_clps711x_data {
 
 static int spi_clps711x_setup(struct spi_device *spi)
 {
+	if (!spi->controller_state) {
+		int ret;
+
+		ret = devm_gpio_request(&spi->master->dev, spi->cs_gpio,
+					dev_name(&spi->master->dev));
+		if (ret)
+			return ret;
+
+		spi->controller_state = spi;
+	}
+
 	/* We are expect that SPI-device is not selected */
 	gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
 
@@ -104,20 +113,9 @@ static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
 static int spi_clps711x_probe(struct platform_device *pdev)
 {
 	struct spi_clps711x_data *hw;
-	struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct spi_master *master;
 	struct resource *res;
-	int i, irq, ret;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "No platform data supplied\n");
-		return -EINVAL;
-	}
-
-	if (pdata->num_chipselect < 1) {
-		dev_err(&pdev->dev, "At least one CS must be defined\n");
-		return -EINVAL;
-	}
+	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -127,40 +125,24 @@ static int spi_clps711x_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
-	master->cs_gpios = devm_kzalloc(&pdev->dev, sizeof(int) *
-					pdata->num_chipselect, GFP_KERNEL);
-	if (!master->cs_gpios) {
-		ret = -ENOMEM;
-		goto err_out;
-	}
-
-	master->bus_num = pdev->id;
+	master->bus_num = -1;
 	master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
 	master->bits_per_word_mask =  SPI_BPW_RANGE_MASK(1, 8);
-	master->num_chipselect = pdata->num_chipselect;
+	master->dev.of_node = pdev->dev.of_node;
 	master->setup = spi_clps711x_setup;
 	master->prepare_message = spi_clps711x_prepare_message;
 	master->transfer_one = spi_clps711x_transfer_one;
 
 	hw = spi_master_get_devdata(master);
 
-	for (i = 0; i < master->num_chipselect; i++) {
-		master->cs_gpios[i] = pdata->chipselect[i];
-		ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
-					DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't get CS GPIO %i\n", i);
-			goto err_out;
-		}
-	}
-
 	hw->spi_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hw->spi_clk)) {
 		ret = PTR_ERR(hw->spi_clk);
 		goto err_out;
 	}
 
-	hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
+	hw->syscon =
+		syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon3");
 	if (IS_ERR(hw->syscon)) {
 		ret = PTR_ERR(hw->syscon);
 		goto err_out;
@@ -185,14 +167,8 @@ static int spi_clps711x_probe(struct platform_device *pdev)
 		goto err_out;
 
 	ret = devm_spi_register_master(&pdev->dev, master);
-	if (!ret) {
-		dev_info(&pdev->dev,
-			 "SPI bus driver initialized. Master clock %u Hz\n",
-			 master->max_speed_hz);
+	if (!ret)
 		return 0;
-	}
-
-	dev_err(&pdev->dev, "Failed to register master\n");
 
 err_out:
 	spi_master_put(master);
@@ -200,9 +176,16 @@ err_out:
 	return ret;
 }
 
+static const struct of_device_id clps711x_spi_dt_ids[] = {
+	{ .compatible = "cirrus,ep7209-spi", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids);
+
 static struct platform_driver clps711x_spi_driver = {
 	.driver	= {
 		.name	= DRIVER_NAME,
+		.of_match_table = clps711x_spi_dt_ids,
 	},
 	.probe	= spi_clps711x_probe,
 };
-- 
2.8.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ