lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Jul 2016 18:19:33 -0700 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, Andrew Goodbody <andrew.goodbody@...brionix.com>, Bin Liu <b-liu@...com> Subject: [PATCH 4.4 23/32] usb: musb: Ensure rx reinit occurs for shared_fifo endpoints 4.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Andrew Goodbody <andrew.goodbody@...brionix.com> commit f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 upstream. shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by: Andrew Goodbody <andrew.goodbody@...brionix.com> Signed-off-by: Bin Liu <b-liu@...com> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> --- drivers/usb/musb/musb_host.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -594,14 +594,13 @@ musb_rx_reinit(struct musb *musb, struct musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ - } else { - csr = musb_readw(ep->regs, MUSB_RXCSR); - if (csr & MUSB_RXCSR_RXPKTRDY) - WARNING("rx%d, packet/%d ready?\n", ep->epnum, - musb_readw(ep->regs, MUSB_RXCOUNT)); - - musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); } + csr = musb_readw(ep->regs, MUSB_RXCSR); + if (csr & MUSB_RXCSR_RXPKTRDY) + WARNING("rx%d, packet/%d ready?\n", ep->epnum, + musb_readw(ep->regs, MUSB_RXCOUNT)); + + musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) {
Powered by blists - more mailing lists