Date:	Mon,  8 Aug 2016 17:34:55 -0600
From:	Jonathan Corbet <corbet@....net>
To:	linux-doc@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, Jani Nikula <jani.nikula@...el.com>,
	Jonathan Corbet <corbet@....net>
Subject: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

Fold the sparse document into the development tools set; no changes to the
text itself beyond formatting.

Signed-off-by: Jonathan Corbet <corbet@....net>
---
 Documentation/{sparse.txt => dev-tools/sparse.rst} | 61 +++++++++++++---------
 Documentation/dev-tools/tools.rst                  |  1 +
 2 files changed, 36 insertions(+), 26 deletions(-)
 rename Documentation/{sparse.txt => dev-tools/sparse.rst} (61%)

diff --git a/Documentation/sparse.txt b/Documentation/dev-tools/sparse.rst
similarity index 61%
rename from Documentation/sparse.txt
rename to Documentation/dev-tools/sparse.rst
index eceab13..ebb6087 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/dev-tools/sparse.rst
@@ -1,11 +1,20 @@
-Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@....cz>
-Copyright 2006 Bob Copeland <me@...copeland.com>
+.. Copyright 2004 Linus Torvalds
+.. Copyright 2004 Pavel Machek <pavel@....cz>
+.. Copyright 2006 Bob Copeland <me@...copeland.com>
+
+Sparse
+======
+
+Sparse is a semantic checker for C programs; it can be used to find a
+number of potential problems with kernel code.  See
+https://lwn.net/Articles/689907/ for an overview of sparse; this document
+contains some kernel-specific sparse information.
+
 
 Using sparse for typechecking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------
 
-"__bitwise" is a type attribute, so you have to do something like this:
+``__bitwise`` is a type attribute, so you have to do something like this::
 
         typedef int __bitwise pm_request_t;
 
@@ -14,19 +23,19 @@ Using sparse for typechecking
                 PM_RESUME = (__force pm_request_t) 2
         };
 
-which makes PM_SUSPEND and PM_RESUME "bitwise" integers (the "__force" is
+which makes PM_SUSPEND and PM_RESUME ``bitwise`` integers (the ``__force`` is
 there because sparse will complain about casting to/from a bitwise type,
 but in this case we really _do_ want to force the conversion). And because
-the enum values are all the same type, now "enum pm_request" will be that
+the enum values are all the same type, now ``enum pm_request`` will be that
 type too.
 
-And with gcc, all the __bitwise/__force stuff goes away, and it all ends
-up looking just like integers to gcc.
+And with gcc, all the ``__bitwise``/``__force stuff`` goes away, and it all
+ends up looking just like integers to gcc.
 
 Quite frankly, you don't need the enum there. The above all really just
-boils down to one special "int __bitwise" type.
+boils down to one special ``int __bitwise`` type.
 
-So the simpler way is to just do
+So the simpler way is to just do::
 
         typedef int __bitwise pm_request_t;
 
@@ -35,11 +44,11 @@ So the simpler way is to just do
 
 and you now have all the infrastructure needed for strict typechecking.
 
-One small note: the constant integer "0" is special. You can use a
+One small note: the constant integer ``0`` is special. You can use a
 constant zero as a bitwise integer type without sparse ever complaining.
-This is because "bitwise" (as the name implies) was designed for making
+This is because ``bitwise`` (as the name implies) was designed for making
 sure that bitwise types don't get mixed up (little-endian vs big-endian
-vs cpu-endian vs whatever), and there the constant "0" really _is_
+vs cpu-endian vs whatever), and there the constant ``0`` really _is_
 special.
 
 __bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that
@@ -50,18 +59,18 @@ __bitwise - noisy stuff; in particular, __le*/__be* are that.  We really
 don't want to drown in noise unless we'd explicitly asked for it.
 
 Using sparse for lock checking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------
 
 The following macros are undefined for gcc and defined during a sparse
 run to use the "context" tracking feature of sparse, applied to
 locking.  These annotations tell sparse when a lock is held, with
 regard to the annotated function's entry and exit.
 
-__must_hold - The specified lock is held on function entry and exit.
+``__must_hold`` - The specified lock is held on function entry and exit.
 
-__acquires - The specified lock is held on function exit, but not entry.
+``__acquires`` - The specified lock is held on function exit, but not entry.
 
-__releases - The specified lock is held on function entry, but not exit.
+``__releases`` - The specified lock is held on function entry, but not exit.
 
 If the function enters and exits without the lock held, acquiring and
 releasing the lock inside the function in a balanced way, no
@@ -69,22 +78,22 @@ annotation is needed.  The tree annotations above are for cases where
 sparse would otherwise report a context imbalance.
 
 Getting sparse
-~~~~~~~~~~~~~~
+--------------
 
 You can get latest released versions from the Sparse homepage at
 https://sparse.wiki.kernel.org/index.php/Main_Page
 
 Alternatively, you can get snapshots of the latest development version
-of sparse using git to clone..
+of sparse using git to clone::
 
         git://git.kernel.org/pub/scm/devel/sparse/sparse.git
 
-DaveJ has hourly generated tarballs of the git tree available at..
+DaveJ has hourly generated tarballs of the git tree available at::
 
         http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
 
 
-Once you have it, just do
+Once you have it, just do::
 
         make
         make install
@@ -92,16 +101,16 @@ Once you have it, just do
 as a regular user, and it will install sparse in your ~/bin directory.
 
 Using sparse
-~~~~~~~~~~~~
+------------
 
-Do a kernel make with "make C=1" to run sparse on all the C files that get
-recompiled, or use "make C=2" to run sparse on the files whether they need to
+Do a kernel make with ``make C=1`` to run sparse on all the C files that get
+recompiled, or use ``make C=2`` to run sparse on the files whether they need to
 be recompiled or not.  The latter is a fast way to check the whole tree if you
 have already built it.
 
 The optional make variable CF can be used to pass arguments to sparse.  The
 build system passes -Wbitwise to sparse automatically.  To perform endianness
-checks, you may define __CHECK_ENDIAN__:
+checks, you may define ``__CHECK_ENDIAN__``::
 
         make C=2 CF="-D__CHECK_ENDIAN__"
 
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index ae0c58c..d4bbda3 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -15,3 +15,4 @@ whole; patches welcome!
    :maxdepth: 2
 
    coccinelle
+   sparse
-- 
2.9.2

Powered by blists - more mailing lists