| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 9 Aug 2016 17:15:16 +0000
From: Karl Beldan <kbeldan@...libre.com>
To: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Santosh Shilimkar <ssantosh@...nel.org>,
Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...libre.com>,
Karl Beldan <karl.beldan+oss@...il.com>,
Karl Beldan <kbeldan@...libre.com>
Subject: [PATCH 2/4] ARM: dts: da850: Add an aemif node
Currently the davinci da8xx boards use the mach-davinci aemif code.
Instantiating an aemif node into the DT allows to use the ti-aemif
memory driver and is another step to better DT support.
Also it will allow to properly pass the emif timings via DT.
Signed-off-by: Karl Beldan <kbeldan@...libre.com>
---
arch/arm/boot/dts/da850.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index bc10e7e..f62928c 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -411,6 +411,16 @@
dma-names = "tx", "rx";
};
};
+ aemif: aemif@...00000 {
+ compatible = "ti,da850-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ reg = <0x68000000 0x00008000>;
+ ranges = <0 0 0x60000000 0x08000000
+ 1 0 0x68000000 0x00008000>;
+ status = "disabled";
+ };
nand_cs3@...00000 {
compatible = "ti,davinci-nand";
reg = <0x62000000 0x807ff
--
2.9.2
Powered by blists - more mailing lists