| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 19 Aug 2016 17:07:43 +1200
From: "Michael Kerrisk (man-pages)" <mtk.manpages@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: mtk.manpages@...il.com, Willy Tarreau <w@....eu>,
Vegard Nossum <vegard.nossum@...cle.com>, socketpair@...il.com,
Tetsuo Handa <penguin-kernel@...ove.SAKURA.ne.jp>,
Jens Axboe <axboe@...com>, Al Viro <viro@...iv.linux.org.uk>,
stable@...r.kernel.org, linux-api@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] pipe: make pipe user buffer limit checks more precise
Andrew,
Thanks for picking up this patch series in -mm. Please drop it.
After discussions with Vegard, I have something better now.
Cheers,
Michael
On 08/16/2016 11:14 PM, Michael Kerrisk (man-pages) wrote:
> As currently implemented, when creating a new pipe or increasing
> a pipe's capacity with fcntl(F_SETPIPE_SZ), the checks against
> the limits in /proc/sys/fs/pipe-user-pages-{soft,hard} (added by
> commit 759c01142a5d0) do not include the pages required for the
> new pipe or increased capacity. In the case of fcntl(F_SETPIPE_SZ),
> this means that an unprivileged user can make a one-time capacity
> increase that pushes the user consumption over the limits by up
> to the value specified in /proc/sys/fs/pipe-max-size (which
> defaults to 1 MiB, but might be set to a much higher value).
>
> This patch remedies the problem by including the capacity required
> for the new pipe or the pipe capacity increase in the check against
> the limit.
>
> There is a small chance that this change could break user-space,
> since there are cases where pipe() and fcntl(F_SETPIPE_SZ) calls
> that previously succeeded might fail. However, the chances are
> small, since (a) the pipe-user-pages-{soft,hard} limits are new
> (in 4.5), and the default soft/hard limits are high/unlimited.
> Therefore, it seems warranted to make these limits operate more
> precisely (and behave more like what users probably expect).
>
> Using the test program shown in the previous patch, on an unpatched
> kernel, we first set some limits:
>
> # echo 0 > /proc/sys/fs/pipe-user-pages-soft
> # echo 1000000000 > /proc/sys/fs/pipe-max-size
> # echo 10000 > /proc/sys/fs/pipe-user-pages-hard # 40.96 MB
>
> Then show that we can set a pipe with capacity (100MB) that is
> over the hard limit
>
> # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000
> Loop 1: set pipe capacity to 100000000 bytes
> F_SETPIPE_SZ returned 134217728
>
> Now set the capacity to 100MB twice. The second call fails (which is
> probably surprising to most users, since it seems like a no-op):
>
> # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000 0 100000000
> Loop 1: set pipe capacity to 100000000 bytes
> F_SETPIPE_SZ returned 134217728
> Loop 2: set pipe capacity to 100000000 bytes
> Loop 2, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted
>
> With a patched kernel, setting a capacity over the limit fails at the
> first attempt:
>
> # echo 0 > /proc/sys/fs/pipe-user-pages-soft
> # echo 1000000000 > /proc/sys/fs/pipe-max-size
> # echo 10000 > /proc/sys/fs/pipe-user-pages-hard
> # sudo -u mtk ./test_F_SETPIPE_SZ 1 100000000
> Loop 1: set pipe capacity to 100000000 bytes
> Loop 1, pipe 0: F_SETPIPE_SZ failed: fcntl: Operation not permitted
>
> Cc: Willy Tarreau <w@....eu>
> Cc: Vegard Nossum <vegard.nossum@...cle.com>
> Cc: socketpair@...il.com
> Cc: Tetsuo Handa <penguin-kernel@...ove.SAKURA.ne.jp>
> Cc: Jens Axboe <axboe@...com>
> Cc: Al Viro <viro@...iv.linux.org.uk>
> Cc: stable@...r.kernel.org
> Cc: linux-api@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Michael Kerrisk <mtk.manpages@...il.com>
> ---
> fs/pipe.c | 24 ++++++++++++++----------
> 1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/fs/pipe.c b/fs/pipe.c
> index a98ebca..397d8d9 100644
> --- a/fs/pipe.c
> +++ b/fs/pipe.c
> @@ -610,16 +610,20 @@ static void account_pipe_buffers(struct pipe_inode_info *pipe,
> atomic_long_add(new - old, &pipe->user->pipe_bufs);
> }
>
> -static bool too_many_pipe_buffers_soft(struct user_struct *user)
> +static bool too_many_pipe_buffers_soft(struct user_struct *user,
> + unsigned int nr_pages)
> {
> return pipe_user_pages_soft &&
> - atomic_long_read(&user->pipe_bufs) >= pipe_user_pages_soft;
> + atomic_long_read(&user->pipe_bufs) + nr_pages >=
> + pipe_user_pages_soft;
> }
>
> -static bool too_many_pipe_buffers_hard(struct user_struct *user)
> +static bool too_many_pipe_buffers_hard(struct user_struct *user,
> + unsigned int nr_pages)
> {
> return pipe_user_pages_hard &&
> - atomic_long_read(&user->pipe_bufs) >= pipe_user_pages_hard;
> + atomic_long_read(&user->pipe_bufs) + nr_pages >=
> + pipe_user_pages_hard;
> }
>
> struct pipe_inode_info *alloc_pipe_info(void)
> @@ -631,13 +635,13 @@ struct pipe_inode_info *alloc_pipe_info(void)
> unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
> struct user_struct *user = get_current_user();
>
> - if (!too_many_pipe_buffers_hard(user)) {
> - if (too_many_pipe_buffers_soft(user))
> - pipe_bufs = 1;
> + if (too_many_pipe_buffers_soft(user, PIPE_DEF_BUFFERS))
> + pipe_bufs = 1;
> +
> + if (!too_many_pipe_buffers_hard(user, pipe_bufs))
> pipe->bufs = kcalloc(pipe_bufs,
> sizeof(struct pipe_buffer),
> GFP_KERNEL_ACCOUNT);
> - }
>
> if (pipe->bufs) {
> init_waitqueue_head(&pipe->wait);
> @@ -1132,8 +1136,8 @@ long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
> if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) {
> ret = -EPERM;
> goto out;
> - } else if ((too_many_pipe_buffers_hard(pipe->user) ||
> - too_many_pipe_buffers_soft(pipe->user)) &&
> + } else if ((too_many_pipe_buffers_hard(pipe->user, nr_pages) ||
> + too_many_pipe_buffers_soft(pipe->user, nr_pages)) &&
> !capable(CAP_SYS_RESOURCE) &&
> !capable(CAP_SYS_ADMIN)) {
> ret = -EPERM;
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
Powered by blists - more mailing lists