linux-kernel - [PATCH V2 1/9] i2c: tegra: Fix lines over 80 characters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 26 Aug 2016 14:08:57 +0100
From:   Jon Hunter <jonathanh@...dia.com>
To:     Laxman Dewangan <ldewangan@...dia.com>,
        Wolfram Sang <wsa@...-dreams.de>
CC:     Stephen Warren <swarren@...dotorg.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Alexandre Courbot <gnurou@...il.com>,
        <linux-i2c@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Jon Hunter <jonathanh@...dia.com>
Subject: [PATCH V2 1/9] i2c: tegra: Fix lines over 80 characters

Checkpatch warns about some lines over 80 characters in the Tegra I2C
driver and so fix these.

While we are at it, prefix the second instance of "STOP condition" in
the comment with a "the".

Signed-off-by: Jon Hunter <jonathanh@...dia.com>
---
 drivers/i2c/busses/i2c-tegra.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index d9979da11485..b90bc326907d 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -193,7 +193,8 @@ struct tegra_i2c_dev {
 	bool is_multimaster_mode;
 };
 
-static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg)
+static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+		       unsigned long reg)
 {
 	writel(val, i2c_dev->base + reg);
 }
@@ -643,9 +644,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		return 0;
 
 	/*
-	 * NACK interrupt is generated before the I2C controller generates the
-	 * STOP condition on the bus. So wait for 2 clock periods before resetting
-	 * the controller so that STOP condition has been delivered properly.
+	 * NACK interrupt is generated before the I2C controller generates
+	 * the STOP condition on the bus. So wait for 2 clock periods
+	 * before resetting the controller so that the STOP condition has
+	 * been delivered properly.
 	 */
 	if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
 		udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
-- 
2.1.4