| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 26 Aug 2016 15:17:39 +0100
From: Paul Burton <paul.burton@...tec.com>
To: <linux-mips@...ux-mips.org>, Ralf Baechle <ralf@...ux-mips.org>
CC: Paul Burton <paul.burton@...tec.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Stern <stern@...land.harvard.edu>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>
Subject: [PATCH v2 07/19] usb: host: ehci-sead3: Remove SEAD-3 EHCI code
The SEAD-3 board is now probing its EHCI controller using the generic
EHCI driver & its generic-ehci device tree binding. Remove the unused
SEAD-3 specific EHCI code.
Signed-off-by: Paul Burton <paul.burton@...tec.com>
---
Changes in v2:
- New patch, removing SEAD-3 EHCI code instead of extending it
drivers/usb/host/ehci-hcd.c | 5 --
drivers/usb/host/ehci-sead3.c | 185 ------------------------------------------
2 files changed, 190 deletions(-)
delete mode 100644 drivers/usb/host/ehci-sead3.c
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1e5f529..0630648 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1308,11 +1308,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mv_driver
#endif
-#ifdef CONFIG_MIPS_SEAD3
-#include "ehci-sead3.c"
-#define PLATFORM_DRIVER ehci_hcd_sead3_driver
-#endif
-
static int __init ehci_hcd_init(void)
{
int retval = 0;
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
deleted file mode 100644
index 3d86cc2..0000000
--- a/drivers/usb/host/ehci-sead3.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * MIPS CI13320A EHCI Host Controller driver
- * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@....com>
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-static int ehci_sead3_setup(struct usb_hcd *hcd)
-{
- int ret;
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs + 0x100;
-
-#ifdef __BIG_ENDIAN
- ehci->big_endian_mmio = 1;
- ehci->big_endian_desc = 1;
-#endif
-
- ret = ehci_setup(hcd);
- if (ret)
- return ret;
-
- ehci->need_io_watchdog = 0;
-
- /* Set burst length to 16 words. */
- ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]);
-
- return ret;
-}
-
-const struct hc_driver ehci_sead3_hc_driver = {
- .description = hcd_name,
- .product_desc = "SEAD-3 EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
-
- /*
- * basic lifecycle operations
- *
- */
- .reset = ehci_sead3_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
- }
- hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3");
- if (!hcd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
- goto err1;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- /* Root hub has integrated TT. */
- hcd->has_tt = 1;
-
- ret = usb_add_hcd(hcd, pdev->resource[1].start,
- IRQF_SHARED);
- if (ret == 0) {
- platform_set_drvdata(pdev, hcd);
- device_wakeup_enable(hcd->self.controller);
- return ret;
- }
-
-err1:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_hcd_sead3_drv_suspend(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- bool do_wakeup = device_may_wakeup(dev);
-
- return ehci_suspend(hcd, do_wakeup);
-}
-
-static int ehci_hcd_sead3_drv_resume(struct device *dev)
-{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- ehci_resume(hcd, false);
- return 0;
-}
-
-static const struct dev_pm_ops sead3_ehci_pmops = {
- .suspend = ehci_hcd_sead3_drv_suspend,
- .resume = ehci_hcd_sead3_drv_resume,
-};
-
-#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops)
-
-#else
-#define SEAD3_EHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ehci_hcd_sead3_driver = {
- .probe = ehci_hcd_sead3_drv_probe,
- .remove = ehci_hcd_sead3_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "sead3-ehci",
- .pm = SEAD3_EHCI_PMOPS,
- }
-};
-
-MODULE_ALIAS("platform:sead3-ehci");
--
2.9.3
Powered by blists - more mailing lists