linux-kernel - Re: [RFC PATCH 07/11] pci: controller: designware: Add EP mode support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 23 Sep 2016 09:41:41 -0500
From:   Rob Herring <robh@...nel.org>
To:     Kishon Vijay Abraham I <kishon@...com>
Cc:     Bjorn Helgaas <bhelgaas@...gle.com>, Arnd Bergmann <arnd@...db.de>,
        Jingoo Han <jingoohan1@...il.com>, hch@...radead.org,
        Joao.Pinto@...opsys.com, mingkai.hu@....com, m-karicheri2@...com,
        Pratyush Anand <pratyush.anand@...il.com>,
        linux-pci@...r.kernel.org, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Joao Pinto <jpinto@...opsys.com>, nsekhar@...com
Subject: Re: [RFC PATCH 07/11] pci: controller: designware: Add EP mode
 support

On Wed, Sep 14, 2016 at 10:42:03AM +0530, Kishon Vijay Abraham I wrote:
> Add endpoint mode support to designware driver. This uses the
> EP Core layer introduced recently to add endpoint mode support.
> *Any* function driver can now use this designware device
> to achieve the EP functionality.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> ---
>  .../devicetree/bindings/pci/designware-pcie.txt    |   26 ++-
>  drivers/pci/controller/Kconfig                     |    5 +
>  drivers/pci/controller/Makefile                    |    1 +
>  drivers/pci/controller/pcie-designware-ep.c        |  228 ++++++++++++++++++++
>  drivers/pci/controller/pcie-designware.c           |   30 +++
>  drivers/pci/controller/pcie-designware.h           |   45 ++++
>  6 files changed, 324 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/pci/controller/pcie-designware-ep.c
> 
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> index 6c5322c..bb0b789 100644
> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> @@ -6,23 +6,27 @@ Required properties:
>  - reg-names: Must be "config" for the PCIe configuration space.
>      (The old way of getting the configuration address space from "ranges"
>      is deprecated and should be avoided.)
> -- #address-cells: set to <3>
> -- #size-cells: set to <2>
> -- device_type: set to "pci"
> -- ranges: ranges for the PCI memory and I/O regions
> -- #interrupt-cells: set to <1>
> -- interrupt-map-mask and interrupt-map: standard PCI properties
> -	to define the mapping of the PCIe interface to interrupt
> +- #address-cells (only for host mode): set to <3>
> +- #size-cells (only for host mode): set to <2>
> +- device_type (only for host mode): set to "pci"
> +- ranges (only for host mode): ranges for the PCI memory and I/O regions
> +- num-ib-windows (only for EP mode): number of inbound address translation
> +	windows
> +- num-ob-windows (only for EP mode): number of outbound address translation
> +	windows
> +- #interrupt-cells (only for host mode): set to <1>
> +- interrupt-map-mask and interrupt-map (only for host mode): standard PCI
> +	properties to define the mapping of the PCIe interface to interrupt

It may be clearer to just document EP mode in a separate section even if 
there's some duplication of properties. Other standard PCI binding 
properties probably also don't apply.

Rob