Date:   Tue, 27 Sep 2016 17:47:54 +0200
From:   Robert Jarzmik <robert.jarzmik@...e.fr>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Sergei Ianovich <ynvich@...il.com>, linux-kernel@...r.kernel.org,
        Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
        James Cameron <quozl@...top.org>,
        Russell King <linux@....linux.org.uk>,
        Jiri Slaby <jslaby@...e.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Arnd Bergmann <arnd@...db.de>,
        Joachim Eastwood <manabian@...il.com>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
        Scott Wood <scottwood@...escale.com>,
        Paul Gortmaker <paul.gortmaker@...driver.com>,
        Paul Burton <paul.burton@...tec.com>,
        Mans Rullgard <mans@...sr.com>,
        Ralf Baechle <ralf@...ux-mips.org>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Peter Hurley <peter@...leysoftware.com>,
        "open list\:SERIAL DRIVERS" <linux-serial@...r.kernel.org>
Subject: Re: [PATCH v6] serial: rewrite pxa2xx-uart to use 8250_core

Robert Jarzmik <robert.jarzmik@...e.fr> writes:

>>> If so, great, get the platform maintainer to sign off on this please and
>>> then resend it.
>
> If you're talking about the PXA maintainer, then :
> Acked-by: Robert Jarzmik <robert.jarzmik@...e.fr>
>
> I'm happy with the patch, all pxa board maintainers have been warned, and there
> exists a fallback solution.
>
> So let's go forward, and if people complain, let them complain and forward them
> to me.

Hi Greg,

I rebased and retested the patch (both devicetree and legacy boards, multiple
pxa variants, early console and standard console), and it does work. The
fallback on the old driver works as well.

I also signed it as the pxa maintainer, and I'm pushing it now, in [2].

If you want context, it's archived in [1].

If you're overburdened and feel there won't be a merge conflict in your serial
tree, I can take it through pxa tree provided you ack it, or you can take it,
just let me know.

Cheers.

-- 
Robert

[1] Original discussion
    https://patchwork.kernel.org/patch/7918421/

[2] The patch
---8>---
>From 6d9bd0c05c9c7bf42ee1655f3a50dcff959bc87d Mon Sep 17 00:00:00 2001
From: Sergey Yanovich <ynvich@...il.com>
Date: Thu, 24 Dec 2015 18:15:14 +0300
Subject: [PATCH] serial: rewrite pxa2xx-uart to use 8250_core

pxa2xx-uart was a separate uart platform driver. It was declaring
the same device names and numbers as 8250 driver. As a result,
it was impossible to use 8250 driver on PXA SoCs.

Upon closer examination pxa2xx-uart turned out to be a clone of
8250_core driver.

Workaround for Erratum #19 according to Marvel(R) PXA270M Processor
Specification Update (April 19, 2010) is dropped. 8250_core reads
from FIFO immediately after checking DR bit in LSR.

The patch leaves the original SERIAL_PXA driver around. The original
driver is just marked DEPRECATED in Kconfig and C source. When
the original driver is considered safe to remove, no changes
to SERIAL_8250 will be necessary.

Compiling SERIAL_8250_CONSOLE and SERIAL_PXA_CONSOLE even without
SERIAL_8250_PXA breaks console for SERIAL_PXA. For this reasons, the new
and the original drivers are made mutually exclusive.

Signed-off-by: Sergei Ianovich <ynvich@...il.com>
CC: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
CC: James Cameron <quozl@...top.org>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Robert Jarzmik <robert.jarzmik@...e.fr>
CC: Russell King <linux@....linux.org.uk>
Reviewed-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
[rebased on v4.8]
Tested-by: Robert Jarzmik <robert.jarzmik@...e.fr>
Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
---
 drivers/tty/serial/8250/8250_pxa.c | 177 +++++++++++++++++++++++++++++++++++++
 drivers/tty/serial/8250/Kconfig    |  10 +++
 drivers/tty/serial/8250/Makefile   |   1 +
 drivers/tty/serial/Kconfig         |  17 +++-
 drivers/tty/serial/Makefile        |   2 +-
 drivers/tty/serial/pxa.c           |   4 +-
 6 files changed, 207 insertions(+), 4 deletions(-)
 create mode 100644 drivers/tty/serial/8250/8250_pxa.c

diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
new file mode 100644
index 000000000000..6a14df013754
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -0,0 +1,177 @@
+/*
+ *  drivers/tty/serial/8250/8250_pxa.c -- driver for PXA on-board UARTS
+ *  Copyright:	(C) 2013 Sergei Ianovich <ynvich@...il.com>
+ *
+ *  replaces drivers/serial/pxa.c by Nicolas Pitre
+ *  Created:	Feb 20, 2003
+ *  Copyright:	(C) 2003 Monta Vista Software, Inc.
+ *
+ *  Based on drivers/serial/8250.c by Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+
+#include "8250.h"
+
+struct pxa8250_data {
+	int			line;
+	struct clk		*clk;
+};
+
+#ifdef CONFIG_PM
+static int serial_pxa_suspend(struct device *dev)
+{
+	struct pxa8250_data *data = dev_get_drvdata(dev);
+
+	serial8250_suspend_port(data->line);
+
+	return 0;
+}
+
+static int serial_pxa_resume(struct device *dev)
+{
+	struct pxa8250_data *data = dev_get_drvdata(dev);
+
+	serial8250_resume_port(data->line);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops serial_pxa_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(serial_pxa_suspend, serial_pxa_resume)
+};
+
+static const struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+/* Uart divisor latch write */
+static void serial_pxa_dl_write(struct uart_8250_port *up, int value)
+{
+	unsigned int dll;
+
+	serial_out(up, UART_DLL, value & 0xff);
+	/*
+	 * work around Erratum #74 according to Marvel(R) PXA270M Processor
+	 * Specification Update (April 19, 2010)
+	 */
+	dll = serial_in(up, UART_DLL);
+	WARN_ON(dll != (value & 0xff));
+
+	serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+
+static void serial_pxa_pm(struct uart_port *port, unsigned int state,
+	      unsigned int oldstate)
+{
+	struct pxa8250_data *data = port->private_data;
+
+	if (!state)
+		clk_prepare_enable(data->clk);
+	else
+		clk_disable_unprepare(data->clk);
+}
+
+static int serial_pxa_probe(struct platform_device *pdev)
+{
+	struct uart_8250_port uart = {};
+	struct pxa8250_data *data;
+	struct resource *mmres, *irqres;
+	int ret;
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	ret = clk_prepare(data->clk);
+	if (ret)
+		return ret;
+
+	uart.port.type = PORT_XSCALE;
+	uart.port.iotype = UPIO_MEM32;
+	uart.port.mapbase = mmres->start;
+	uart.port.regshift = 2;
+	uart.port.irq = irqres->start;
+	uart.port.fifosize = 64;
+	uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST;
+	uart.port.dev = &pdev->dev;
+	uart.port.uartclk = clk_get_rate(data->clk);
+	uart.port.pm = serial_pxa_pm;
+	uart.port.private_data = data;
+	uart.dl_write = serial_pxa_dl_write;
+
+	ret = serial8250_register_8250_port(&uart);
+	if (ret < 0)
+		goto err_clk;
+
+	data->line = ret;
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+
+ err_clk:
+	clk_unprepare(data->clk);
+	return ret;
+}
+
+static int serial_pxa_remove(struct platform_device *pdev)
+{
+	struct pxa8250_data *data = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(data->line);
+
+	clk_unprepare(data->clk);
+
+	return 0;
+}
+
+static struct platform_driver serial_pxa_driver = {
+	.probe          = serial_pxa_probe,
+	.remove         = serial_pxa_remove,
+
+	.driver		= {
+		.name	= "pxa2xx-uart",
+		.pm	= &serial_pxa_pm_ops,
+		.of_match_table = serial_pxa_dt_ids,
+	},
+};
+
+module_platform_driver(serial_pxa_driver);
+
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-uart");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index c9ec839a5ddf..a294e858e16b 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -426,6 +426,16 @@ config SERIAL_8250_MOXA
 	  This driver can also be built as a module. The module will be called
 	  8250_moxa. If you want to do that, say M here.
 
+config SERIAL_8250_PXA
+	tristate "PXA serial port support"
+	depends on SERIAL_8250
+	depends on ARCH_PXA || ARCH_MMP
+	help
+	  If you have a machine based on an Intel XScale PXA2xx CPU you can
+	  enable its onboard serial ports by enabling this option. The option is
+	  applicable to both devicetree and legacy boards, and early console is
+	  part of its support.
+
 config SERIAL_OF_PLATFORM
 	tristate "Devicetree based probing for 8250 ports"
 	depends on SERIAL_8250 && OF
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 367d403d28d5..30745c94ae45 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
 obj-$(CONFIG_SERIAL_8250_MOXA)		+= 8250_moxa.o
+obj-$(CONFIG_SERIAL_8250_PXA)		+= 8250_pxa.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM)	+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 518db24a5b36..543cdd58232d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -438,17 +438,27 @@ config SERIAL_MPSC_CONSOLE
 	  Say Y here if you want to support a serial console on a Marvell MPSC.
 
 config SERIAL_PXA
-	bool "PXA serial port support"
+	bool "PXA serial port support (DEPRECATED)"
 	depends on ARCH_PXA || ARCH_MMP
 	select SERIAL_CORE
+	select SERIAL_8250_PXA if SERIAL_8250=y
+	select SERIAL_PXA_NON8250 if !SERIAL_8250=y
 	help
 	  If you have a machine based on an Intel XScale PXA2xx CPU you
 	  can enable its onboard serial ports by enabling this option.
 
+	  Unless you have a specific need, you should use SERIAL_8250_PXA
+	  instead of this.
+
+config SERIAL_PXA_NON8250
+	bool
+	depends on !SERIAL_8250
+
 config SERIAL_PXA_CONSOLE
-	bool "Console on PXA serial port"
+	bool "Console on PXA serial port (DEPRECATED)"
 	depends on SERIAL_PXA
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE if SERIAL_8250=y
 	help
 	  If you have enabled the serial port on the Intel XScale PXA
 	  CPU you can make it the console by answering Y to this option.
@@ -460,6 +470,9 @@ config SERIAL_PXA_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
+	  Unless you have a specific need, you should use SERIAL_8250_PXA
+	  and SERIAL_8250_CONSOLE instead of this.
+
 config SERIAL_SA1100
 	bool "SA1100 serial port support"
 	depends on ARCH_SA1100
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 1278d376da50..1fa21ec616bd 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250/
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-obj-$(CONFIG_SERIAL_PXA) += pxa.o
+obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index cd9d9e878475..b9dd787cb561 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -925,7 +925,9 @@ static struct platform_driver serial_pxa_driver = {
 	},
 };
 
-static int __init serial_pxa_init(void)
+
+/* 8250 driver for PXA serial ports should be used */
+static int __deprecated __init serial_pxa_init(void)
 {
 	int ret;
 
-- 
2.1.4

Powered by blists - more mailing lists