linux-kernel - [PATCH] ARM: dts: at91: sama5d3_uart: fix reg sizes to match documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 10 Nov 2016 08:46:40 +0100
From:   Peter Rosin <peda@...ntia.se>
To:     <linux-kernel@...r.kernel.org>
CC:     Peter Rosin <peda@...ntia.se>,
        Nicolas Ferre <nicolas.ferre@...el.com>,
        Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
        Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>
Subject: [PATCH] ARM: dts: at91: sama5d3_uart: fix reg sizes to match documentation

The new size (0x100) also matches the size given in sama5d3.dtsi

Documentation reference: section 43.6 "Universal Asynchronous
Receiver Transmitter (UART) User Interface", table 43-4 "Register
Mapping" in [1].

[1] Atmel-11121F-ATARM-SAMA5D3-Series-Datasheet_02-Feb-16

Signed-off-by: Peter Rosin <peda@...ntia.se>
---
 arch/arm/boot/dts/sama5d3_uart.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 2511d748867b..186377d41c91 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -55,7 +55,7 @@
 
 			uart0: serial@...24000 {
 				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf0024000 0x200>;
+				reg = <0xf0024000 0x100>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -66,7 +66,7 @@
 
 			uart1: serial@...28000 {
 				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8028000 0x200>;
+				reg = <0xf8028000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-- 
2.1.4