| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Nov 2016 06:40:47 -0200
From: Mauro Carvalho Chehab <mchehab@...pensource.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Jörg Otte <jrg.otte@...il.com>,
Patrick Boettcher <patrick.boettcher@...teo.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Media Mailing List <linux-media@...r.kernel.org>
Subject: Re: [v4.9-rc4] dvb-usb/cinergyT2 NULL pointer dereference
Em Wed, 9 Nov 2016 11:07:35 -0800
Linus Torvalds <torvalds@...ux-foundation.org> escreveu:
> On Wed, Nov 9, 2016 at 3:09 AM, Jörg Otte <jrg.otte@...il.com> wrote:
> >
> > Tried patch with no success. Again a NULL ptr dereferece.
>
> That patch was pure garbage, I think. Pretty much all the other
> drivers that use the same approach will have the same issue. Adding
> that init function just for the semaphore is crazy.
>
> I suspect a much simpler approach is to just miove the "data_mutex"
> away from the priv area and into "struct dvb_usb_device" and
> "dvb_usb_adapter". Sure, that grows those structures a tiny bit, and
> not every driver may need that mutex, but it simplifies things
> enormously. Mauro?
>
> Linus
[PATCH] cinergyT2-core: move data_mutex to struct dvb_usb_device
The data_mutex is initialized too late, as it is needed for
the device's power control, causing an OOPS:
dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0
Oops: 0002 [#1] SMP
Modules linked in: dvb_usb_cinergyT2(+) dvb_usb
CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24
Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014
task: ffff88020e943840 task.stack: ffff8801f36ec000
RIP: 0010:[<ffffffff846617af>] [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100
RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc
RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000
R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840
R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0
FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0
Stack:
ffff88021509bdd0 0000000000000000 0000000000000000 ffffffffc0137c80
ffff88021509bdc8 ffff8801f5944000 0000000000000001 ffffffffc0136b00
ffff880213e52000 ffff88021509bdc8 ffffffff84661856 ffff88021509bd80
Call Trace:
[<ffffffff84661856>] ? mutex_lock+0x16/0x25
[<ffffffffc013616f>] ? cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2]
[<ffffffffc012e67e>] ? dvb_usb_device_init+0x21e/0x5d0 [dvb_usb]
[<ffffffffc0136021>] ? cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2]
[<ffffffff844326f3>] ? usb_probe_interface+0xf3/0x2a0
[<ffffffff8438e348>] ? driver_probe_device+0x208/0x2b0
[<ffffffff8438e477>] ? __driver_attach+0x87/0x90
[<ffffffff8438e3f0>] ? driver_probe_device+0x2b0/0x2b0
[<ffffffff8438c612>] ? bus_for_each_dev+0x52/0x80
[<ffffffff8438d983>] ? bus_add_driver+0x1a3/0x220
[<ffffffff8438ec06>] ? driver_register+0x56/0xd0
[<ffffffff84431527>] ? usb_register_driver+0x77/0x130
[<ffffffffc013a000>] ? 0xffffffffc013a000
[<ffffffff84000426>] ? do_one_initcall+0x46/0x180
[<ffffffff840eb2c8>] ? free_vmap_area_noflush+0x38/0x70
[<ffffffff840f3844>] ? kmem_cache_alloc+0x84/0xc0
[<ffffffff840b802c>] ? do_init_module+0x50/0x1be
[<ffffffff84095adb>] ? load_module+0x1d8b/0x2100
[<ffffffff84093020>] ? find_symbol_in_section+0xa0/0xa0
[<ffffffff84095fe9>] ? SyS_finit_module+0x89/0x90
[<ffffffff846637a0>] ? entry_SYSCALL_64_fastpath+0x13/0x94
Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10>
CR2: 0000000000000000
So, move it to the struct dvb_usb_device and initialize it
before calling the driver's callbacks.
Reported-by: Jörg Otte <jrg.otte@...il.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@...pensource.com>
diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 8ac825413d5a..87e3bd33900d 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -42,7 +42,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
struct cinergyt2_state {
u8 rc_counter;
unsigned char data[64];
- struct mutex data_mutex;
};
/* We are missing a release hook with usb_device data */
@@ -56,12 +55,12 @@ static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
struct cinergyt2_state *st = d->priv;
int ret;
- mutex_lock(&st->data_mutex);
+ mutex_lock(&d->data_mutex);
st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
st->data[1] = enable ? 1 : 0;
ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
- mutex_unlock(&st->data_mutex);
+ mutex_unlock(&d->data_mutex);
return ret;
}
@@ -71,12 +70,12 @@ static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
struct cinergyt2_state *st = d->priv;
int ret;
- mutex_lock(&st->data_mutex);
+ mutex_lock(&d->data_mutex);
st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
st->data[1] = enable ? 0 : 1;
ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
- mutex_unlock(&st->data_mutex);
+ mutex_unlock(&d->data_mutex);
return ret;
}
@@ -89,7 +88,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
- mutex_lock(&st->data_mutex);
+ mutex_lock(&d->data_mutex);
st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
@@ -97,7 +96,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
"state info\n");
}
- mutex_unlock(&st->data_mutex);
+ mutex_unlock(&d->data_mutex);
/* Copy this pointer as we are gonna need it in the release phase */
cinergyt2_usb_device = adap->dev;
@@ -166,7 +165,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
*state = REMOTE_NO_KEY_PRESSED;
- mutex_lock(&st->data_mutex);
+ mutex_lock(&d->data_mutex);
st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
@@ -202,7 +201,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
}
ret:
- mutex_unlock(&st->data_mutex);
+ mutex_unlock(&d->data_mutex);
return ret;
}
@@ -210,7 +209,6 @@ static int cinergyt2_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dvb_usb_device *d;
- struct cinergyt2_state *st;
int ret;
ret = dvb_usb_device_init(intf, &cinergyt2_properties,
@@ -218,9 +216,6 @@ static int cinergyt2_usb_probe(struct usb_interface *intf,
if (ret < 0)
return ret;
- st = d->priv;
- mutex_init(&st->data_mutex);
-
return 0;
}
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 3896ba9a4179..84308569e7dc 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -142,6 +142,7 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
{
int ret = 0;
+ mutex_init(&d->data_mutex);
mutex_init(&d->usb_mutex);
mutex_init(&d->i2c_mutex);
diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
index 1448c3d27ea2..12b71acee550 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -404,6 +404,7 @@ struct dvb_usb_adapter {
* Powered is in/decremented for each call to modify the state.
* @udev: pointer to the device's struct usb_device.
*
+ * @data_mutex: mutex to protect the data structure used to store URB data
* @usb_mutex: semaphore of USB control messages (reading needs two messages)
* @i2c_mutex: semaphore for i2c-transfers
*
@@ -433,6 +434,7 @@ struct dvb_usb_device {
int powered;
/* locking */
+ struct mutex data_mutex;
struct mutex usb_mutex;
/* i2c */
Powered by blists - more mailing lists