linux-kernel - [PATCH] ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 11 Nov 2016 09:38:21 -0800
From:   Eric Anholt <eric@...olt.net>
To:     Rob Herring <robh+dt@...nel.org>
Cc:     linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Stephen Warren <swarren@...dotorg.org>,
        Lee Jones <lee@...nel.org>,
        bcm-kernel-feedback-list@...adcom.com,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Andrea Merello <andrea.merello@...il.com>,
        Eric Anholt <eric@...olt.net>
Subject: [PATCH] ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED

From: Andrea Merello <andrea.merello@...il.com>

We are incorrectly defining the pwr LED, attaching it to a gpio line
that is wired to the Wi-Fi SDIO module (which fails due to this).

The actual power LED is connected to the GPIO expander, which we don't
expose currently.

Thanks-to: Eric Anholt <eric@...olt.net> [for clarifying we can't control the LED]
Signed-off-by: Andrea Merello <andrea.merello@...il.com>
Signed-off-by: Eric Anholt <eric@...olt.net>
---
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 7625e57a64b5..c309633a1e87 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -16,13 +16,6 @@
 		act {
 			gpios = <&gpio 47 0>;
 		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 0>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
 	};
 };
 
-- 
2.10.2