| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Nov 2016 15:29:31 +0000
From: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
To: iommu@...ts.linux-foundation.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Will Deacon <will.deacon@....com>,
Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>,
Marc Zyngier <marc.zyngier@....com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Tomasz Nowicki <tn@...ihalf.com>,
Hanjun Guo <hanjun.guo@...aro.org>,
Jon Masters <jcm@...hat.com>,
Eric Auger <eric.auger@...hat.com>,
Sinan Kaya <okaya@...eaurora.org>,
Nate Watterson <nwatters@...eaurora.org>,
Prem Mallappa <prem.mallappa@...adcom.com>,
Dennis Chen <dennis.chen@....com>, linux-acpi@...r.kernel.org,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v8 11/16] drivers: iommu: arm-smmu-v3: add IORT configuration
In ACPI bases systems, in order to be able to create platform
devices and initialize them for ARM SMMU v3 components, the IORT
kernel implementation requires a set of static functions to be
used by the IORT kernel layer to configure platform devices for
ARM SMMU v3 components.
Add static configuration functions to the IORT kernel layer for
the ARM SMMU v3 components, so that the ARM SMMU v3 driver can
initialize its respective platform device by relying on the IORT
kernel infrastructure and by adding a corresponding ACPI device
early probe section entry.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Reviewed-by: Tomasz Nowicki <tn@...ihalf.com>
Tested-by: Hanjun Guo <hanjun.guo@...aro.org>
Tested-by: Tomasz Nowicki <tn@...ihalf.com>
Cc: Will Deacon <will.deacon@....com>
Cc: Robin Murphy <robin.murphy@....com>
Cc: Joerg Roedel <joro@...tes.org>
---
drivers/acpi/arm64/iort.c | 103 +++++++++++++++++++++++++++++++++++++++++++-
drivers/iommu/arm-smmu-v3.c | 49 ++++++++++++++++++++-
2 files changed, 150 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index ddf83b5..fd52e4c 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -459,6 +459,95 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
}
+static void __init acpi_iort_register_irq(int hwirq, const char *name,
+ int trigger,
+ struct resource *res)
+{
+ int irq = acpi_register_gsi(NULL, hwirq, trigger,
+ ACPI_ACTIVE_HIGH);
+
+ if (irq <= 0) {
+ pr_err("could not register gsi hwirq %d name [%s]\n", hwirq,
+ name);
+ return;
+ }
+
+ res->start = irq;
+ res->end = irq;
+ res->flags = IORESOURCE_IRQ;
+ res->name = name;
+}
+
+static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu_v3 *smmu;
+ /* Always present mem resource */
+ int num_res = 1;
+
+ /* Retrieve SMMUv3 specific data */
+ smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ if (smmu->event_gsiv)
+ num_res++;
+
+ if (smmu->pri_gsiv)
+ num_res++;
+
+ if (smmu->gerr_gsiv)
+ num_res++;
+
+ if (smmu->sync_gsiv)
+ num_res++;
+
+ return num_res;
+}
+
+static void __init arm_smmu_v3_init_resources(struct resource *res,
+ struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu_v3 *smmu;
+ int num_res = 0;
+
+ /* Retrieve SMMUv3 specific data */
+ smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ res[num_res].start = smmu->base_address;
+ res[num_res].end = smmu->base_address + SZ_128K - 1;
+ res[num_res].flags = IORESOURCE_MEM;
+
+ num_res++;
+
+ if (smmu->event_gsiv)
+ acpi_iort_register_irq(smmu->event_gsiv, "eventq",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+
+ if (smmu->pri_gsiv)
+ acpi_iort_register_irq(smmu->pri_gsiv, "priq",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+
+ if (smmu->gerr_gsiv)
+ acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+
+ if (smmu->sync_gsiv)
+ acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+}
+
+static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu_v3 *smmu;
+
+ /* Retrieve SMMUv3 specific data */
+ smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
+}
+
struct iort_iommu_config {
const char *name;
int (*iommu_init)(struct acpi_iort_node *node);
@@ -468,10 +557,22 @@ struct iort_iommu_config {
struct acpi_iort_node *node);
};
+static const struct iort_iommu_config iort_arm_smmu_v3_cfg __initconst = {
+ .name = "arm-smmu-v3",
+ .iommu_is_coherent = arm_smmu_v3_is_coherent,
+ .iommu_count_resources = arm_smmu_v3_count_resources,
+ .iommu_init_resources = arm_smmu_v3_init_resources
+};
+
static __init
const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node *node)
{
- return NULL;
+ switch (node->type) {
+ case ACPI_IORT_NODE_SMMU_V3:
+ return &iort_arm_smmu_v3_cfg;
+ default:
+ return NULL;
+ }
}
/**
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index ed563307..9315bf3 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -20,6 +20,8 @@
* This driver is powered by bad coffee and bombay mix.
*/
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
#include <linux/err.h>
@@ -2559,6 +2561,36 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
return 0;
}
+#ifdef CONFIG_ACPI
+static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu,
+ bool *bypass)
+{
+ struct acpi_iort_smmu_v3 *iort_smmu;
+ struct device *dev = smmu->dev;
+ struct acpi_iort_node *node;
+
+ node = *(struct acpi_iort_node **)dev_get_platdata(dev);
+
+ /* Retrieve SMMUv3 specific data */
+ iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
+ smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+ *bypass = false;
+
+ return 0;
+}
+#else
+static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu,
+ bool *bypass)
+{
+ return -ENODEV;
+}
+#endif
+
static int arm_smmu_device_dt_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu,
bool *bypass)
@@ -2626,7 +2658,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
if (irq > 0)
smmu->gerr_irq = irq;
- ret = arm_smmu_device_dt_probe(pdev, smmu, &bypass);
+ if (dev->of_node)
+ ret = arm_smmu_device_dt_probe(pdev, smmu, &bypass);
+ else
+ ret = arm_smmu_device_acpi_probe(pdev, smmu, &bypass);
+
if (ret)
return ret;
@@ -2731,6 +2767,17 @@ static int __init arm_smmu_of_init(struct device_node *np)
}
IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init);
+#ifdef CONFIG_ACPI
+static int __init acpi_smmu_v3_init(struct acpi_table_header *table)
+{
+ if (iort_node_match(ACPI_IORT_NODE_SMMU_V3))
+ return arm_smmu_init();
+
+ return 0;
+}
+IORT_ACPI_DECLARE(arm_smmu_v3, ACPI_SIG_IORT, acpi_smmu_v3_init);
+#endif
+
MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
MODULE_AUTHOR("Will Deacon <will.deacon@....com>");
MODULE_LICENSE("GPL v2");
--
2.10.0
Powered by blists - more mailing lists