| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 26 Nov 2016 09:17:26 +0530
From: Aniroop Mathur <a.mathur@...sung.com>
To: jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: s.samuel@...sung.com, r.mahale@...sung.com,
aniroop.mathur@...il.com, Aniroop Mathur <a.mathur@...sung.com>
Subject: [PATCH] IIO: Change msleep to usleep_range for small msecs
msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, data reading time, etc.
Thus, change msleep to usleep_range for precise wakeups.
Signed-off-by: Aniroop Mathur <a.mathur@...sung.com>
---
drivers/iio/adc/exynos_adc.c | 2 +-
drivers/iio/pressure/bmp280-core.c | 14 +++++++-------
drivers/staging/iio/meter/ade7753.c | 2 +-
drivers/staging/iio/meter/ade7753.h | 2 +-
drivers/staging/iio/meter/ade7754.c | 2 +-
drivers/staging/iio/meter/ade7754.h | 2 +-
drivers/staging/iio/meter/ade7758.h | 2 +-
drivers/staging/iio/meter/ade7758_core.c | 2 +-
drivers/staging/iio/meter/ade7759.c | 2 +-
drivers/staging/iio/meter/ade7759.h | 2 +-
drivers/staging/iio/meter/ade7854.c | 2 +-
drivers/staging/iio/meter/ade7854.h | 2 +-
12 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index c15756d..ad1775b 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -632,7 +632,7 @@ static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
input_report_key(info->input, BTN_TOUCH, 1);
input_sync(info->input);
- msleep(1);
+ usleep_range(1000, 1100);
};
writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index e5a533c..4d18826 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -65,7 +65,7 @@ struct bmp280_data {
struct bmp180_calib calib;
struct regulator *vddd;
struct regulator *vdda;
- unsigned int start_up_time; /* in milliseconds */
+ unsigned int start_up_time; /* in microseconds */
/* log of base 2 of oversampling rate */
u8 oversampling_press;
@@ -935,14 +935,14 @@ int bmp280_common_probe(struct device *dev,
data->chip_info = &bmp180_chip_info;
data->oversampling_press = ilog2(8);
data->oversampling_temp = ilog2(1);
- data->start_up_time = 10;
+ data->start_up_time = 10000;
break;
case BMP280_CHIP_ID:
indio_dev->num_channels = 2;
data->chip_info = &bmp280_chip_info;
data->oversampling_press = ilog2(16);
data->oversampling_temp = ilog2(2);
- data->start_up_time = 2;
+ data->start_up_time = 2000;
break;
case BME280_CHIP_ID:
indio_dev->num_channels = 3;
@@ -950,7 +950,7 @@ int bmp280_common_probe(struct device *dev,
data->oversampling_press = ilog2(16);
data->oversampling_humid = ilog2(16);
data->oversampling_temp = ilog2(2);
- data->start_up_time = 2;
+ data->start_up_time = 2000;
break;
default:
return -EINVAL;
@@ -979,7 +979,7 @@ int bmp280_common_probe(struct device *dev,
goto out_disable_vddd;
}
/* Wait to make sure we started up properly */
- mdelay(data->start_up_time);
+ usleep_range(data->start_up_time, data->start_up_time + 100);
/* Bring chip out of reset if there is an assigned GPIO line */
gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
@@ -1038,7 +1038,7 @@ int bmp280_common_probe(struct device *dev,
* Set autosuspend to two orders of magnitude larger than the
* start-up time.
*/
- pm_runtime_set_autosuspend_delay(dev, data->start_up_time *100);
+ pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
pm_runtime_use_autosuspend(dev);
pm_runtime_put(dev);
@@ -1101,7 +1101,7 @@ static int bmp280_runtime_resume(struct device *dev)
ret = regulator_enable(data->vdda);
if (ret)
return ret;
- msleep(data->start_up_time);
+ usleep_range(data->start_up_time, data->start_up_time + 100);
return data->chip_info->chip_config(data);
}
#endif /* CONFIG_PM */
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index 4b5f05f..671dc99 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -377,7 +377,7 @@ static int ade7753_initial_setup(struct iio_dev *indio_dev)
}
ade7753_reset(dev);
- msleep(ADE7753_STARTUP_DELAY);
+ usleep_range(ADE7753_STARTUP_DELAY, ADE7753_STARTUP_DELAY + 100);
err_ret:
return ret;
diff --git a/drivers/staging/iio/meter/ade7753.h b/drivers/staging/iio/meter/ade7753.h
index a9d93cc..bfe7491 100644
--- a/drivers/staging/iio/meter/ade7753.h
+++ b/drivers/staging/iio/meter/ade7753.h
@@ -49,7 +49,7 @@
#define ADE7753_MAX_TX 4
#define ADE7753_MAX_RX 4
-#define ADE7753_STARTUP_DELAY 1
+#define ADE7753_STARTUP_DELAY 1000
#define ADE7753_SPI_SLOW (u32)(300 * 1000)
#define ADE7753_SPI_BURST (u32)(1000 * 1000)
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index c46bef6..49eb10b 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -396,7 +396,7 @@ static int ade7754_initial_setup(struct iio_dev *indio_dev)
}
ade7754_reset(dev);
- msleep(ADE7754_STARTUP_DELAY);
+ usleep_range(ADE7754_STARTUP_DELAY, ADE7754_STARTUP_DELAY + 100);
err_ret:
return ret;
diff --git a/drivers/staging/iio/meter/ade7754.h b/drivers/staging/iio/meter/ade7754.h
index e42ffc3..28f71c2 100644
--- a/drivers/staging/iio/meter/ade7754.h
+++ b/drivers/staging/iio/meter/ade7754.h
@@ -67,7 +67,7 @@
#define ADE7754_MAX_TX 4
#define ADE7754_MAX_RX 4
-#define ADE7754_STARTUP_DELAY 1
+#define ADE7754_STARTUP_DELAY 1000
#define ADE7754_SPI_SLOW (u32)(300 * 1000)
#define ADE7754_SPI_BURST (u32)(1000 * 1000)
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index 1d04ec9..6ae78d8 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -89,7 +89,7 @@
#define ADE7758_MAX_TX 8
#define ADE7758_MAX_RX 4
-#define ADE7758_STARTUP_DELAY 1
+#define ADE7758_STARTUP_DELAY 1000
#define AD7758_NUM_WAVSEL 5
#define AD7758_NUM_PHSEL 3
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index ebb8a19..3767246 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -459,7 +459,7 @@ static int ade7758_initial_setup(struct iio_dev *indio_dev)
}
ade7758_reset(dev);
- msleep(ADE7758_STARTUP_DELAY);
+ usleep_range(ADE7758_STARTUP_DELAY, ADE7758_STARTUP_DELAY + 100);
err_ret:
return ret;
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 80144d4..944ee34 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -338,7 +338,7 @@ static int ade7759_initial_setup(struct iio_dev *indio_dev)
}
ade7759_reset(dev);
- msleep(ADE7759_STARTUP_DELAY);
+ usleep_range(ADE7759_STARTUP_DELAY, ADE7759_STARTUP_DELAY + 100);
err_ret:
return ret;
diff --git a/drivers/staging/iio/meter/ade7759.h b/drivers/staging/iio/meter/ade7759.h
index f9ff1f8..f0716d2 100644
--- a/drivers/staging/iio/meter/ade7759.h
+++ b/drivers/staging/iio/meter/ade7759.h
@@ -30,7 +30,7 @@
#define ADE7759_MAX_TX 6
#define ADE7759_MAX_RX 6
-#define ADE7759_STARTUP_DELAY 1
+#define ADE7759_STARTUP_DELAY 1000
#define ADE7759_SPI_SLOW (u32)(300 * 1000)
#define ADE7759_SPI_BURST (u32)(1000 * 1000)
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index 75e8685..58a05ec 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -444,7 +444,7 @@ static int ade7854_initial_setup(struct iio_dev *indio_dev)
}
ade7854_reset(dev);
- msleep(ADE7854_STARTUP_DELAY);
+ usleep_range(ADE7854_STARTUP_DELAY, ADE7854_STARTUP_DELAY + 100);
err_ret:
return ret;
diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h
index 52f4195..dbd97de 100644
--- a/drivers/staging/iio/meter/ade7854.h
+++ b/drivers/staging/iio/meter/ade7854.h
@@ -136,7 +136,7 @@
#define ADE7854_MAX_TX 7
#define ADE7854_MAX_RX 7
-#define ADE7854_STARTUP_DELAY 1
+#define ADE7854_STARTUP_DELAY 1000
#define ADE7854_SPI_SLOW (u32)(300 * 1000)
#define ADE7854_SPI_BURST (u32)(1000 * 1000)
--
2.6.2
Powered by blists - more mailing lists