linux-kernel - Re: [PATCH 1/3] ARM: dts: imx6: Add Savageboard common file

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 5 Dec 2016 09:36:50 -0200
From:   Fabio Estevam <festevam@...il.com>
To:     Milo Kim <woogyom.kim@...il.com>
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/3] ARM: dts: imx6: Add Savageboard common file

On Sun, Dec 4, 2016 at 11:07 PM, Milo Kim <woogyom.kim@...il.com> wrote:

> +       regulators {
> +               compatible = "simple-bus";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               reg_3p3v: regulator@0 {
> +                       compatible = "regulator-fixed";
> +                       reg = <0>;
> +                       regulator-name = "3P3V";
> +                       regulator-min-microvolt = <3300000>;
> +                       regulator-max-microvolt = <3300000>;
> +                       regulator-always-on;
> +               };

Please remove the regulators container and put the regulator node
directly as follows:

reg_3p3v: regulator-3p3v {
   compatible = "regulator-fixed";
   regulator-name = "3P3V";
   regulator-min-microvolt = <3300000>;
   regulator-max-microvolt = <3300000>;
   regulator-always-on;
}

> +       };
> +};
> +
> +&clks {
> +       assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
> +                         <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
> +       assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
> +                                <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
> +};
> +
> +&fec {
> +       phy-mode = "rgmii";
> +       phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;

I think you meant
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;

> +&iomuxc {
> +       savageboard {
> +               pinctrl_emmc: emmcgrp {
> +                       fsl,pins = <
> +                               MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
> +                               MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
> +                               MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
> +                               MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
> +                               MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
> +                               MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
> +                               MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
> +                               MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
> +                               MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
> +                               MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
> +                       >;
> +               };

You can remove the savegeboard level. Please check
arch/arm/boot/dts/imx6q-tbs2910.dts.

iomux usually go as the last node of the dts file.