| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 8 Dec 2016 12:17:59 -0800
From: Jingkui Wang <jkwang@...gle.com>
To: linux-input@...r.kernel.org
Cc: dmitry.torokhov@...il.com, Dan Murphy <dmurphy@...com>,
Jingkui Wang <jkwang@...gle.com>, linux-kernel@...r.kernel.org
Subject: [PATCH] drivers: Update drv260x driver
Update driver drv260x to use generic device properties
Remove platform data
Signed-off-by: Jingkui Wang <jkwang@...gle.com>
---
drivers/input/misc/drv260x.c | 43 ++++++++-----------------------------------
1 file changed, 8 insertions(+), 35 deletions(-)
diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 2adfd86c..4f448ba 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -19,7 +19,6 @@
#include <linux/input.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -27,7 +26,6 @@
#include <linux/regulator/consumer.h>
#include <dt-bindings/input/ti-drv260x.h>
-#include <linux/platform_data/drv260x-pdata.h>
#define DRV260X_STATUS 0x0
#define DRV260X_MODE 0x1
@@ -468,52 +466,39 @@ static const struct regmap_config drv260x_regmap_config = {
.cache_type = REGCACHE_NONE,
};
-#ifdef CONFIG_OF
-static int drv260x_parse_dt(struct device *dev,
+static int drv260x_read_device_property(struct device *dev,
struct drv260x_data *haptics)
{
- struct device_node *np = dev->of_node;
unsigned int voltage;
int error;
- error = of_property_read_u32(np, "mode", &haptics->mode);
+ error = device_property_read_u32(dev, "mode", &haptics->mode);
if (error) {
dev_err(dev, "%s: No entry for mode\n", __func__);
return error;
}
- error = of_property_read_u32(np, "library-sel", &haptics->library);
+ error = device_property_read_u32(dev, "library-sel", &haptics->library);
if (error) {
dev_err(dev, "%s: No entry for library selection\n",
__func__);
return error;
}
- error = of_property_read_u32(np, "vib-rated-mv", &voltage);
+ error = device_property_read_u32(dev, "vib-rated-mv", &voltage);
if (!error)
haptics->rated_voltage = drv260x_calculate_voltage(voltage);
-
- error = of_property_read_u32(np, "vib-overdrive-mv", &voltage);
+ error = device_property_read_u32(dev, "vib-overdrive-mv", &voltage);
if (!error)
haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
return 0;
}
-#else
-static inline int drv260x_parse_dt(struct device *dev,
- struct drv260x_data *haptics)
-{
- dev_err(dev, "no platform data defined\n");
-
- return -EINVAL;
-}
-#endif
static int drv260x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
struct drv260x_data *haptics;
int error;
@@ -524,21 +509,9 @@ static int drv260x_probe(struct i2c_client *client,
haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;
- if (pdata) {
- haptics->mode = pdata->mode;
- haptics->library = pdata->library_selection;
- if (pdata->vib_overdrive_voltage)
- haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
- if (pdata->vib_rated_voltage)
- haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
- } else if (client->dev.of_node) {
- error = drv260x_parse_dt(&client->dev, haptics);
- if (error)
- return error;
- } else {
- dev_err(&client->dev, "Platform data not set\n");
- return -ENODEV;
- }
+ error = drv260x_read_device_property(&client->dev, haptics);
+ if (error)
+ return error;
if (haptics->mode < DRV260X_LRA_MODE ||
--
2.6.6
Powered by blists - more mailing lists