| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 10 Dec 2016 23:22:50 -0800
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Jingkui Wang <jkwang@...gle.com>
Cc: linux-input@...r.kernel.org, Dan Murphy <dmurphy@...com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] drivers: Update drv260x driver
Hi Jingkui,
On Fri, Dec 09, 2016 at 01:45:26PM -0800, Jingkui Wang wrote:
> Update driver drv260x to use generic device properties
> Remove platform data and corresponding header file
Please next time come up with more descriptive subject than "drivers:
Update drv260x driver": when scanning commit messages person shoudl be
able to gauge whether the change is interesting or not.
> -static int drv260x_parse_dt(struct device *dev,
> +static int drv260x_read_device_property(struct device *dev,
> struct drv260x_data *haptics)
> {
> - struct device_node *np = dev->of_node;
> unsigned int voltage;
> int error;
>
> - error = of_property_read_u32(np, "mode", &haptics->mode);
> + error = device_property_read_u32(dev, "mode", &haptics->mode);
> if (error) {
> dev_err(dev, "%s: No entry for mode\n", __func__);
> return error;
> }
>
> - error = of_property_read_u32(np, "library-sel", &haptics->library);
> + error = device_property_read_u32(dev, "library-sel", &haptics->library);
> if (error) {
> dev_err(dev, "%s: No entry for library selection\n",
> __func__);
> return error;
> }
Now that platform code is gone there it makes no sense separating
reading properties from validating the settings. Does the following
version look OK to you (it needs a patch introducing temporary in
probe() function, you'll find it attached)?
Thanks.
--
Dmitry
Input: drv260x - use generic device properties
From: Jingkui Wang <jkwang@...gle.com>
Update driver drv260x to use generic device properties so that it can be
used on non-DT systems. We also remove platform data as generic device
properties work on static board code as well.
Signed-off-by: Jingkui Wang <jkwang@...gle.com>
Patchwork-Id: 9469075
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
drivers/input/misc/drv260x.c | 80 ++++++---------------------
include/linux/platform_data/drv260x-pdata.h | 28 ---------
2 files changed, 19 insertions(+), 89 deletions(-)
delete mode 100644 include/linux/platform_data/drv260x-pdata.h
diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 18c266c..11664d7 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -18,8 +18,6 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -27,7 +25,6 @@
#include <linux/regulator/consumer.h>
#include <dt-bindings/input/ti-drv260x.h>
-#include <linux/platform_data/drv260x-pdata.h>
#define DRV260X_STATUS 0x0
#define DRV260X_MODE 0x1
@@ -468,54 +465,12 @@ static const struct regmap_config drv260x_regmap_config = {
.cache_type = REGCACHE_NONE,
};
-#ifdef CONFIG_OF
-static int drv260x_parse_dt(struct device *dev,
- struct drv260x_data *haptics)
-{
- struct device_node *np = dev->of_node;
- unsigned int voltage;
- int error;
-
- error = of_property_read_u32(np, "mode", &haptics->mode);
- if (error) {
- dev_err(dev, "%s: No entry for mode\n", __func__);
- return error;
- }
-
- error = of_property_read_u32(np, "library-sel", &haptics->library);
- if (error) {
- dev_err(dev, "%s: No entry for library selection\n",
- __func__);
- return error;
- }
-
- error = of_property_read_u32(np, "vib-rated-mv", &voltage);
- if (!error)
- haptics->rated_voltage = drv260x_calculate_voltage(voltage);
-
-
- error = of_property_read_u32(np, "vib-overdrive-mv", &voltage);
- if (!error)
- haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
-
- return 0;
-}
-#else
-static inline int drv260x_parse_dt(struct device *dev,
- struct drv260x_data *haptics)
-{
- dev_err(dev, "no platform data defined\n");
-
- return -EINVAL;
-}
-#endif
-
static int drv260x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
struct device *dev = &client->dev;
struct drv260x_data *haptics;
+ u32 voltage;
int error;
haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
@@ -525,29 +480,24 @@ static int drv260x_probe(struct i2c_client *client,
haptics->overdrive_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;
- if (pdata) {
- haptics->mode = pdata->mode;
- haptics->library = pdata->library_selection;
- if (pdata->vib_overdrive_voltage)
- haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
- if (pdata->vib_rated_voltage)
- haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
- } else if (client->dev.of_node) {
- error = drv260x_parse_dt(&client->dev, haptics);
- if (error)
- return error;
- } else {
- dev_err(dev, "Platform data not set\n");
- return -ENODEV;
+ error = device_property_read_u32(dev, "mode", &haptics->mode);
+ if (error) {
+ dev_err(dev, "Can't fetch 'mode' property: %d\n", error);
+ return error;
}
-
if (haptics->mode < DRV260X_LRA_MODE ||
haptics->mode > DRV260X_ERM_MODE) {
dev_err(dev, "Vibrator mode is invalid: %i\n", haptics->mode);
return -EINVAL;
}
+ error = device_property_read_u32(dev, "library-sel", &haptics->library);
+ if (error) {
+ dev_err(dev, "Can't fetch 'library-sel' property: %d\n", error);
+ return error;
+ }
+
if (haptics->library < DRV260X_LIB_EMPTY ||
haptics->library > DRV260X_ERM_LIB_F) {
dev_err(dev,
@@ -569,6 +519,14 @@ static int drv260x_probe(struct i2c_client *client,
return -EINVAL;
}
+ error = device_property_read_u32(dev, "vib-rated-mv", &voltage);
+ haptics->rated_voltage = error ? DRV260X_DEF_RATED_VOLT :
+ drv260x_calculate_voltage(voltage);
+
+ error = device_property_read_u32(dev, "vib-overdrive-mv", &voltage);
+ haptics->overdrive_voltage = error ? DRV260X_DEF_OD_CLAMP_VOLT :
+ drv260x_calculate_voltage(voltage);
+
haptics->regulator = devm_regulator_get(dev, "vbat");
if (IS_ERR(haptics->regulator)) {
error = PTR_ERR(haptics->regulator);
diff --git a/include/linux/platform_data/drv260x-pdata.h b/include/linux/platform_data/drv260x-pdata.h
deleted file mode 100644
index 0a03b09..0000000
--- a/include/linux/platform_data/drv260x-pdata.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Platform data for DRV260X haptics driver family
- *
- * Author: Dan Murphy <dmurphy@...com>
- *
- * Copyright: (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef _LINUX_DRV260X_PDATA_H
-#define _LINUX_DRV260X_PDATA_H
-
-struct drv260x_platform_data {
- u32 library_selection;
- u32 mode;
- u32 vib_rated_voltage;
- u32 vib_overdrive_voltage;
-};
-
-#endif
View attachment "drv260x-use-temp-dev.patch" of type "text/x-diff" (4666 bytes)
Powered by blists - more mailing lists