lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 12 Dec 2016 14:25:32 +0000
From:   "Winkler, Tomas" <tomas.winkler@...el.com>
To:     Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>,
        Peter Huewe <peterhuewe@....de>
CC:     open list <linux-kernel@...r.kernel.org>,
        "linux-security-module@...r.kernel.org" 
        <linux-security-module@...r.kernel.org>,
        "moderated list:TPM DEVICE DRIVER" 
        <tpmdd-devel@...ts.sourceforge.net>
Subject: RE: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

> 
> In order to provide access to locality registers, this commits adds mapping of
> the head of the CRB registers, which are located right before the control area.
> 
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
> ---
>  drivers/char/tpm/tpm_crb.c | 89 +++++++++++++++++++++++++++++------------
> -----
>  1 file changed, 57 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index
> 717b6b4..80b9759 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -52,18 +52,28 @@ enum crb_cancel {
>  	CRB_CANCEL_INVOKE	= BIT(0),
>  };
> 
> -struct crb_control_area {
> -	u32 req;
> -	u32 sts;
> -	u32 cancel;
> -	u32 start;
> -	u32 int_enable;
> -	u32 int_sts;
> -	u32 cmd_size;
> -	u32 cmd_pa_low;
> -	u32 cmd_pa_high;
> -	u32 rsp_size;
> -	u64 rsp_pa;
> +struct crb_regs_head {
> +	u32 loc_state;
> +	u32 reserved1;
> +	u32 loc_ctrl;
> +	u32 loc_sts;
> +	u8 reserved2[32];
> +	u64 intf_id;
> +	u64 ctrl_ext;
> +} __packed;
> +

> +struct crb_regs_tail {
Why to change the name this is still control_area 
> +	u32 ctrl_req;
> +	u32 ctrl_sts;
> +	u32 ctrl_cancel;
> +	u32 ctrl_start;
> +	u32 ctrl_int_enable;
> +	u32 ctrl_int_sts;
> +	u32 ctrl_cmd_size;
> +	u32 ctrl_cmd_pa_low;
> +	u32 ctrl_cmd_pa_high;
> +	u32 ctrl_rsp_size;
> +	u64 ctrl_rsp_pa;
>  } __packed;
> 
>  enum crb_status {
> @@ -78,7 +88,8 @@ enum crb_flags {
>  struct crb_priv {
>  	unsigned int flags;
>  	void __iomem *iobase;
> -	struct crb_control_area __iomem *cca;
> +	struct crb_regs_head __iomem *regs_h;
> +	struct crb_regs_tail __iomem *regs_t;

Same here, why to change the name, let's keep it cca it will reduce the size of patch and make it more back portable. 

>  	u8 __iomem *cmd;
>  	u8 __iomem *rsp;
>  	u32 cmd_size;
> @@ -104,7 +115,7 @@ static int __maybe_unused crb_go_idle(struct device
> *dev, struct crb_priv *priv)
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		return 0;
> 
> -	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req);
> +	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
>  	/* we don't really care when this settles */
> 
>  	return 0;
> @@ -128,21 +139,23 @@ static int __maybe_unused crb_cmd_ready(struct
> device *dev,
>  					struct crb_priv *priv)
>  {
>  	ktime_t stop, start;
> +	u32 req;
> 
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		return 0;
> 
> -	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req);
> +	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
> 
>  	start = ktime_get();
>  	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
>  	do {
> -		if (!(ioread32(&priv->cca->req) &
> CRB_CTRL_REQ_CMD_READY))
> +		req = ioread32(&priv->regs_t->ctrl_req);
> +		if (!(req & CRB_CTRL_REQ_CMD_READY))
>  			return 0;
>  		usleep_range(50, 100);
>  	} while (ktime_before(ktime_get(), stop));
> 
> -	if (ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY) {
> +	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY)
> {
>  		dev_warn(dev, "cmdReady timed out\n");
>  		return -ETIME;
>  	}
> @@ -155,7 +168,7 @@ static u8 crb_status(struct tpm_chip *chip)
>  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
>  	u8 sts = 0;
> 
> -	if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
> +	if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
>  	    CRB_START_INVOKE)
>  		sts |= CRB_DRV_STS_COMPLETE;
> 
> @@ -171,7 +184,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf,
> size_t count)
>  	if (count < 6)
>  		return -EIO;
> 
> -	if (ioread32(&priv->cca->sts) & CRB_CTRL_STS_ERROR)
> +	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
>  		return -EIO;
> 
>  	memcpy_fromio(buf, priv->rsp, 6);
> @@ -210,7 +223,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
>  	/* Zero the cancel register so that the next command will not get
>  	 * canceled.
>  	 */
> -	iowrite32(0, &priv->cca->cancel);
> +	iowrite32(0, &priv->regs_t->ctrl_cancel);
> 
>  	if (len > priv->cmd_size) {
>  		dev_err(&chip->dev, "invalid command count value %zd %d\n",
> @@ -224,7 +237,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
>  	wmb();
> 
>  	if (priv->flags & CRB_FL_CRB_START)
> -		iowrite32(CRB_START_INVOKE, &priv->cca->start);
> +		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
> 
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		rc = crb_do_acpi_start(chip);
> @@ -236,7 +249,7 @@ static void crb_cancel(struct tpm_chip *chip)  {
>  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> 
> -	iowrite32(CRB_CANCEL_INVOKE, &priv->cca->cancel);
> +	iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
> 
>  	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
>  		dev_err(&chip->dev, "ACPI Start failed\n"); @@ -245,7 +258,7
> @@ static void crb_cancel(struct tpm_chip *chip)  static bool
> crb_req_canceled(struct tpm_chip *chip, u8 status)  {
>  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> -	u32 cancel = ioread32(&priv->cca->cancel);
> +	u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
> 
>  	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;  }
> @@ -322,10 +335,22 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
>  	if (IS_ERR(priv->iobase))
>  		return PTR_ERR(priv->iobase);
> 
> -	priv->cca = crb_map_res(dev, priv, &io_res, buf->control_address,
> -				sizeof(struct crb_control_area));
> -	if (IS_ERR(priv->cca))
> -		return PTR_ERR(priv->cca);
> +	/* The ACPI IO region starts at the head area and continues to include
> +	 * the control area, as one nice sane region except for some older
> +	 * stuff that puts the control area outside the ACPI IO region.


This is not explained correctly.  BDW and older platforms implement  only a PC subset of the spec. 
On those platforms there are only CCA registers, other registers are not implemented. 

> +	 */
> +	if (!(priv->flags & CRB_FL_ACPI_START)) {
> +		if (buf->control_address == io_res.start +
> +		    sizeof(*priv->regs_h))
> +			priv->regs_h = priv->iobase;
> +		else
> +			dev_warn(dev, FW_BUG "Bad ACPI memory layout");
> +	}
> +
> +	priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address,
> +				   sizeof(struct crb_regs_tail));
> +	if (IS_ERR(priv->regs_t))
> +		return PTR_ERR(priv->regs_t);
> 
>  	/*
>  	 * PTT HW bug w/a: wake up the device to access @@ -335,10 +360,10
> @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
>  	if (ret)
>  		return ret;
> 
> -	pa_high = ioread32(&priv->cca->cmd_pa_high);
> -	pa_low  = ioread32(&priv->cca->cmd_pa_low);
> +	pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high);
> +	pa_low  = ioread32(&priv->regs_t->ctrl_cmd_pa_low);
>  	cmd_pa = ((u64)pa_high << 32) | pa_low;
> -	cmd_size = ioread32(&priv->cca->cmd_size);
> +	cmd_size = ioread32(&priv->regs_t->ctrl_cmd_size);
> 
>  	dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
>  		pa_high, pa_low, cmd_size);
> @@ -349,9 +374,9 @@ static int crb_map_io(struct acpi_device *device, struct
> crb_priv *priv,
>  		goto out;
>  	}
> 
> -	memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
> +	memcpy_fromio(&rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
>  	rsp_pa = le64_to_cpu(rsp_pa);
> -	rsp_size = ioread32(&priv->cca->rsp_size);
> +	rsp_size = ioread32(&priv->regs_t->ctrl_rsp_size);
> 
>  	if (cmd_pa != rsp_pa) {
>  		priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
> --
> 2.9.3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ