| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 5 Jan 2017 20:43:53 -0600
From: David Lechner <david@...hnology.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: David Lechner <david@...hnology.com>, linux-input@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/3] dt-bindings: Input: Add enable-gpios to pwm-beeper
This adds an optional enable-gpios property to pwm-beeper. This gpio is
used to enable the beeper. For example, the beeper may have an amplifier
that needs to be switched on.
Signed-off-by: David Lechner <david@...hnology.com>
---
Documentation/devicetree/bindings/input/pwm-beeper.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
index be332ae..1c6bcf8 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -5,3 +5,14 @@ Registers a PWM device as beeper.
Required properties:
- compatible: should be "pwm-beeper"
- pwms: phandle to the physical PWM device
+
+Optional properties:
+- enable-gpios: phandle to gpio to enable the beeper
+
+Example:
+
+beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm0>;
+ enable-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+};
--
2.7.4
Powered by blists - more mailing lists