lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 16 Jan 2017 16:52:46 -0800
From:   John Stultz <john.stultz@...aro.org>
To:     lkml <linux-kernel@...r.kernel.org>
Cc:     John Stultz <john.stultz@...aro.org>,
        David Airlie <airlied@...ux.ie>,
        Archit Taneja <architt@...eaurora.org>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        dri-devel@...ts.freedesktop.org
Subject: [PATCH 0/6 v4] adv7511 EDID probing improvements

Wanted to re-send out v4  of this patch set, integrating some
changes suggested by Laurent, for consideration for merging for
v4.11

The first three patches are fixups that are hopefully straight
forward, integrating feedback I got from Laurant, with minimal
change from the previous versions.

The last three patches try to clean up and rework the EDID
probing code, to avoid issues seen on HiKey. I've reworked these
more significantly since v3 to address feedback from Laurent.

Thoughts and feedback would be appreciated!

thanks
-john

New in v4:
* Tweaked connector.status assignment to avoid race, as
  suggested by Laurent
* Reworked the __adv7511_power_on helpers to avoid calling
  regcache_sync in the EDID probe path
* Added new patch to set EDID_I2C_ADDR register before doing
  EDID read.

Cc: David Airlie <airlied@...ux.ie>
Cc: Archit Taneja <architt@...eaurora.org>
Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>
Cc: Lars-Peter Clausen <lars@...afoo.de>
Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: dri-devel@...ts.freedesktop.org

Archit Taneja (1):
  drm/bridge: adv7511: Enable HPD interrupts to support hotplug and
    improve monitor detection

John Stultz (5):
  drm/bridge: adv7511: Use work_struct to defer hotplug handing to out
    of irq context
  drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
  drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be
    reused internally
  drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
  drm/bridge: adv7511: Re-write the i2c address before EDID probing

 drivers/gpu/drm/bridge/adv7511/adv7511.h     |  2 +
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 67 ++++++++++++++++++++--------
 2 files changed, 51 insertions(+), 18 deletions(-)

-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ