linux-kernel - Re: [PATCH v2 15/26] drm/rockchip: dw-mipi-dsi: ensure PHY is reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 22 Jan 2017 17:37:28 +0800
From:   Chris Zhong <zyw@...k-chips.com>
To:     John Keeping <john@...anate.com>,
        Mark Yao <mark.yao@...k-chips.com>
Cc:     dri-devel@...ts.freedesktop.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 15/26] drm/rockchip: dw-mipi-dsi: ensure PHY is reset


Reviewed-by: Chris Zhong <zyw@...k-chips.com>

On 01/22/2017 12:31 AM, John Keeping wrote:
> Also don't power up the DSI host at this point since this is not
> necessary in order to configure the PHY and we do so later when
> selecting video or command mode.
>
> Signed-off-by: John Keeping <john@...anate.com>
> ---
> Unchanged in v2
> ---
>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index c2e0ba96e0a0..5b3068e9e8db 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -397,7 +397,10 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
>   		return testdin;
>   	}
>   
> -	dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	/* Start by clearing PHY state */
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
>   
>   	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
>   					 VCO_RANGE_CON_SEL(vco) |