| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 30 Jan 2017 12:32:31 +0900
From: Masanari Iida <standby24x7@...il.com>
To: linux-kernel@...r.kernel.org, gregkh@...uxfoundation.org,
david.kershner@...sys.com, devel@...verdev.osuosl.org
Cc: Masanari Iida <standby24x7@...il.com>
Subject: [PATCH] [linux-next]staging: unisys: visornic: Fix typo in visornic_main.c
This patch fix some spelling typos found in visornic_main.c
Signed-off-by: Masanari Iida <standby24x7@...il.com>
---
drivers/staging/unisys/visornic/visornic_main.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c
index 0a8f36125f5b..c44c430b966f 100644
--- a/drivers/staging/unisys/visornic/visornic_main.c
+++ b/drivers/staging/unisys/visornic/visornic_main.c
@@ -423,7 +423,7 @@ send_enbdis(struct net_device *netdev, int state,
/**
* visornic_disable_with_timeout - Disable network adapter
- * @netdev: netdevice to disale
+ * @netdev: netdevice to disable
* @timeout: timeout to wait for disable
*
* Disable the network adapter and inform the IO Partition that we
@@ -532,7 +532,7 @@ init_rcv_bufs(struct net_device *netdev, struct visornic_devdata *devdata)
return -ENOMEM;
count = i;
- /* Ensure we can alloc 2/3rd of the requeested number of buffers.
+ /* Ensure we can alloc 2/3rd of the requested number of buffers.
* 2/3 is an arbitrary choice; used also in ndis init.c
*/
if (count < ((2 * devdata->num_rcv_bufs) / 3)) {
@@ -561,7 +561,7 @@ init_rcv_bufs(struct net_device *netdev, struct visornic_devdata *devdata)
*
* Sends enable to IOVM, inits, and posts receive buffers to IOVM
* timeout is defined in msecs (timeout of 0 specifies infinite wait)
- * Return 0 for success, negavite for failure.
+ * Return 0 for success, negative for failure.
*/
static int
visornic_enable_with_timeout(struct net_device *netdev, const int timeout)
@@ -750,7 +750,7 @@ static inline bool vnic_hit_low_watermark(struct visornic_devdata *devdata,
* @skb: Packet to be sent
* @netdev: net device the packet is being sent from
*
- * Convert the skb to a cmdrsp so the IO Partition can undersand it.
+ * Convert the skb to a cmdrsp so the IO Partition can understand it.
* Send the XMIT command to the IO Partition for processing. This
* function is protected from concurrent calls by a spinlock xmit_lock
* in the net_device struct, but as soon as the function returns it
@@ -1097,7 +1097,7 @@ repost_return(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata,
*
* Got a receive packet back from the IO Part, handle it and send
* it up the stack.
- * Returns 1 iff an skb was receieved, otherwise 0
+ * Returns 1 iff an skb was received, otherwise 0
*/
static int
visornic_rx(struct uiscmdrsp *cmdrsp)
@@ -1227,7 +1227,7 @@ visornic_rx(struct uiscmdrsp *cmdrsp)
}
}
- /* set up packet's protocl type using ethernet header - this
+ /* set up packet's protocol type using ethernet header - this
* sets up skb->pkt_type & it also PULLS out the eth header
*/
skb->protocol = eth_type_trans(skb, netdev);
@@ -1549,7 +1549,7 @@ drain_resp_queue(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata)
* @cmdrsp: io channel command response message
* @devdata: visornic device to drain
*
- * Drain the respones queue of any responses from the IO partition.
+ * Drain the response queue of any responses from the IO partition.
* Process the responses as we get them.
* Returns when response queue is empty or when the thread stops.
*/
@@ -1665,7 +1665,7 @@ static int visornic_poll(struct napi_struct *napi, int budget)
* poll_for_irq - Checks the status of the response queue.
* @v: void pointer to the visronic devdata
*
- * Main function of the vnic_incoming thread. Peridocially check the
+ * Main function of the vnic_incoming thread. Periodically check the
* response queue and drain it if needed.
* Returns when thread has stopped.
*/
@@ -1711,7 +1711,7 @@ static int visornic_probe(struct visor_device *dev)
netdev->watchdog_timeo = 5 * HZ;
SET_NETDEV_DEV(netdev, &dev->device);
- /* Get MAC adddress from channel and read it into the device. */
+ /* Get MAC address from channel and read it into the device. */
netdev->addr_len = ETH_ALEN;
channel_offset = offsetof(struct spar_io_channel_protocol,
vnic.macaddr);
@@ -1835,7 +1835,7 @@ static int visornic_probe(struct visor_device *dev)
/* Let's start our threads to get responses */
netif_napi_add(netdev, &devdata->napi, visornic_poll, NAPI_WEIGHT);
- /* Note: Interupts have to be enable before the while
+ /* Note: Interrupts have to be enable before the while
* loop below because the napi routine is responsible for
* setting enab_dis_acked
*/
@@ -1848,7 +1848,7 @@ static int visornic_probe(struct visor_device *dev)
goto cleanup_napi_add;
}
- /* create debgug/sysfs directories */
+ /* create debug/sysfs directories */
devdata->eth_debugfs_dir = debugfs_create_dir(netdev->name,
visornic_debugfs_dir);
if (!devdata->eth_debugfs_dir) {
--
2.11.0.485.g4e59582ff70d
Powered by blists - more mailing lists