| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 6 Feb 2017 15:38:07 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Willy Tarreau <willy@...roxy.com>,
Ksenija Stanojevic <ksenija.stanojevic@...il.com>,
Arnd Bergmann <arnd@...db.de>
Cc: linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: [PATCH 05/13] misc: panel: Move all suboptions into a big if section
All 18 suboptions related to the panel driver have individual
dependencies on PANEL.
Replace them by a single "if PANEL / endif # PANEL" section for easier
dependency management.
Signed-off-by: Geert Uytterhoeven <geert@...ux-m68k.org>
---
drivers/misc/Kconfig | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2687ecf3e9e673fa..c290990d73edf87e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -503,9 +503,10 @@ config PANEL
compiled as a module, or linked into the kernel and started at boot.
If you don't understand what all this is about, say N.
+if PANEL
+
config PANEL_PARPORT
int "Default parallel port number (0=LPT1)"
- depends on PANEL
range 0 255
default "0"
---help---
@@ -517,7 +518,6 @@ config PANEL_PARPORT
config PANEL_PROFILE
int "Default panel profile (0-5, 0=custom)"
- depends on PANEL
range 0 5
default "5"
---help---
@@ -538,7 +538,7 @@ config PANEL_PROFILE
for experts.
config PANEL_KEYPAD
- depends on PANEL && PANEL_PROFILE="0"
+ depends on PANEL_PROFILE="0"
int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"
range 0 3
default 0
@@ -555,7 +555,7 @@ config PANEL_KEYPAD
supports simultaneous keys pressed when the keypad supports them.
config PANEL_LCD
- depends on PANEL && PANEL_PROFILE="0"
+ depends on PANEL_PROFILE="0"
int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"
range 0 5
default 0
@@ -578,7 +578,7 @@ config PANEL_LCD
that those values changed from the 2.4 driver for better consistency.
config PANEL_LCD_HEIGHT
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "Number of lines on the LCD (1-2)"
range 1 2
default 2
@@ -587,7 +587,7 @@ config PANEL_LCD_HEIGHT
It can either be 1 or 2.
config PANEL_LCD_WIDTH
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "Number of characters per line on the LCD (1-40)"
range 1 40
default 40
@@ -596,7 +596,7 @@ config PANEL_LCD_WIDTH
Common values are 16,20,24,40.
config PANEL_LCD_BWIDTH
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "Internal LCD line width (1-40, 40 by default)"
range 1 40
default 40
@@ -612,7 +612,7 @@ config PANEL_LCD_BWIDTH
If you don't know, put '40' here.
config PANEL_LCD_HWIDTH
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "Hardware LCD line width (1-64, 64 by default)"
range 1 64
default 64
@@ -626,7 +626,7 @@ config PANEL_LCD_HWIDTH
64 here for a 2x40.
config PANEL_LCD_CHARSET
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "LCD character set (0=normal, 1=KS0074)"
range 0 1
default 0
@@ -642,7 +642,7 @@ config PANEL_LCD_CHARSET
If you don't know, use the normal one (0).
config PANEL_LCD_PROTO
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "LCD communication mode (0=parallel 8 bits, 1=serial)"
range 0 1
default 0
@@ -655,7 +655,7 @@ config PANEL_LCD_PROTO
parallel LCD, and 1 for a serial LCD.
config PANEL_LCD_PIN_E
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
range -17 17
default 14
@@ -670,7 +670,7 @@ config PANEL_LCD_PIN_E
Default for the 'E' pin in custom profile is '14' (AUTOFEED).
config PANEL_LCD_PIN_RS
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
range -17 17
default 17
@@ -685,7 +685,7 @@ config PANEL_LCD_PIN_RS
Default for the 'RS' pin in custom profile is '17' (SELECT IN).
config PANEL_LCD_PIN_RW
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
range -17 17
default 16
@@ -700,7 +700,7 @@ config PANEL_LCD_PIN_RW
Default for the 'RW' pin in custom profile is '16' (INIT).
config PANEL_LCD_PIN_SCL
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
range -17 17
default 1
@@ -715,7 +715,7 @@ config PANEL_LCD_PIN_SCL
Default for the 'SCL' pin in custom profile is '1' (STROBE).
config PANEL_LCD_PIN_SDA
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
range -17 17
default 2
@@ -730,7 +730,7 @@ config PANEL_LCD_PIN_SDA
Default for the 'SDA' pin in custom profile is '2' (D0).
config PANEL_LCD_PIN_BL
- depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
range -17 17
default 0
@@ -745,7 +745,6 @@ config PANEL_LCD_PIN_BL
Default for the 'BL' pin in custom profile is '0' (uncontrolled).
config PANEL_CHANGE_MESSAGE
- depends on PANEL
bool "Change LCD initialization message ?"
default "n"
---help---
@@ -758,7 +757,7 @@ config PANEL_CHANGE_MESSAGE
say 'N' and keep the default message with the version.
config PANEL_BOOT_MESSAGE
- depends on PANEL && PANEL_CHANGE_MESSAGE="y"
+ depends on PANEL_CHANGE_MESSAGE="y"
string "New initialization message"
default ""
---help---
@@ -770,6 +769,8 @@ config PANEL_BOOT_MESSAGE
An empty message will only clear the display at driver init time. Any other
printf()-formatted message is valid with newline and escape codes.
+endif # PANEL
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
--
1.9.1
Powered by blists - more mailing lists