| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 16 Feb 2017 10:19:25 -0800
From: Steve Longerbeam <slongerbeam@...il.com>
To: Philipp Zabel <p.zabel@...gutronix.de>
Cc: robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
kernel@...gutronix.de, fabio.estevam@....com,
linux@...linux.org.uk, mchehab@...nel.org, hverkuil@...all.nl,
nick@...anahar.org, markus.heiser@...marIT.de,
laurent.pinchart+renesas@...asonboard.com, bparrot@...com,
geert@...ux-m68k.org, arnd@...db.de, sudipm.mukherjee@...il.com,
minghsiu.tsai@...iatek.com, tiffany.lin@...iatek.com,
jean-christophe.trotin@...com, horms+renesas@...ge.net.au,
niklas.soderlund+renesas@...natech.se, robert.jarzmik@...e.fr,
songjun.wu@...rochip.com, andrew-ct.chen@...iatek.com,
gregkh@...uxfoundation.org, shuah@...nel.org,
sakari.ailus@...ux.intel.com, pavel@....cz,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org,
devel@...verdev.osuosl.org,
Steve Longerbeam <steve_longerbeam@...tor.com>
Subject: Re: [PATCH v4 36/36] media: imx: propagate sink pad formats to source
pads
On 02/16/2017 03:29 AM, Philipp Zabel wrote:
> On Wed, 2017-02-15 at 18:19 -0800, Steve Longerbeam wrote:
> [...]
>> diff --git a/drivers/staging/media/imx/imx-ic-prpencvf.c b/drivers/staging/media/imx/imx-ic-prpencvf.c
>> index dd9d499..c43f85f 100644
>> --- a/drivers/staging/media/imx/imx-ic-prpencvf.c
>> +++ b/drivers/staging/media/imx/imx-ic-prpencvf.c
>> @@ -806,16 +806,22 @@ static int prp_set_fmt(struct v4l2_subdev *sd,
>> if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
>> cfg->try_fmt = sdformat->format;
>> } else {
>> - priv->format_mbus[sdformat->pad] = sdformat->format;
>> + struct v4l2_mbus_framefmt *f =
>> + &priv->format_mbus[sdformat->pad];
>> + struct v4l2_mbus_framefmt *outf =
>> + &priv->format_mbus[PRPENCVF_SRC_PAD];
>> +
>> + *f = sdformat->format;
>> priv->cc[sdformat->pad] = cc;
>> - if (sdformat->pad == PRPENCVF_SRC_PAD) {
>> - /*
>> - * update the capture device format if this is
>> - * the IDMAC output pad
>> - */
>> - imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix,
>> - &sdformat->format, cc);
>> +
>> + /* propagate format to source pad */
>> + if (sdformat->pad == PRPENCVF_SINK_PAD) {
>> + outf->width = f->width;
>> + outf->height = f->height;
>
> What about media bus format, field, and colorimetry?
Right, I need to propagate a default media bus format and field
that works.
As for colorimtery, I did see the work you are doing in your
branch, but was not sure if you were finished with that support.
Can you send me a patch?
>
>> }
>> +
>> + /* update the capture device format from output pad */
>> + imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix, outf, cc);
>> }
>>
>> return 0;
>> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
>> index 3e6b607..9d9ec03 100644
>> --- a/drivers/staging/media/imx/imx-media-csi.c
>> +++ b/drivers/staging/media/imx/imx-media-csi.c
>> @@ -1161,19 +1161,27 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
>> if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
>> cfg->try_fmt = sdformat->format;
>> } else {
>> + struct v4l2_mbus_framefmt *f_direct, *f_idmac;
>> +
>> priv->format_mbus[sdformat->pad] = sdformat->format;
>> priv->cc[sdformat->pad] = cc;
>> - /* Reset the crop window if this is the input pad */
>> - if (sdformat->pad == CSI_SINK_PAD)
>> +
>> + f_direct = &priv->format_mbus[CSI_SRC_PAD_DIRECT];
>> + f_idmac = &priv->format_mbus[CSI_SRC_PAD_IDMAC];
>> +
>> + if (sdformat->pad == CSI_SINK_PAD) {
>> + /* reset the crop window */
>> priv->crop = crop;
>> - else if (sdformat->pad == CSI_SRC_PAD_IDMAC) {
>> - /*
>> - * update the capture device format if this is
>> - * the IDMAC output pad
>> - */
>> - imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix,
>> - &sdformat->format, cc);
>> +
>> + /* propagate format to source pads */
>> + f_direct->width = crop.width;
>> + f_direct->height = crop.height;
>> + f_idmac->width = crop.width;
>> + f_idmac->height = crop.height;
>
> This is missing also media bus format, field and colorimetry
> propagation.
Yep, will add that.
Steve
>
>> }
>> +
>> + /* update the capture device format from IDMAC output pad */
>> + imx_media_mbus_fmt_to_pix_fmt(&vdev->fmt.fmt.pix, f_idmac, cc);
>> }
>>
>> return 0;
>> diff --git a/drivers/staging/media/imx/imx-media-vdic.c b/drivers/staging/media/imx/imx-media-vdic.c
>> index 61e6017..55fb522 100644
>> --- a/drivers/staging/media/imx/imx-media-vdic.c
>> +++ b/drivers/staging/media/imx/imx-media-vdic.c
>> @@ -649,8 +649,21 @@ static int vdic_set_fmt(struct v4l2_subdev *sd,
>> if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) {
>> cfg->try_fmt = sdformat->format;
>> } else {
>> - priv->format_mbus[sdformat->pad] = sdformat->format;
>> + struct v4l2_mbus_framefmt *f =
>> + &priv->format_mbus[sdformat->pad];
>> + struct v4l2_mbus_framefmt *outf =
>> + &priv->format_mbus[VDIC_SRC_PAD_DIRECT];
>> +
>> + *f = sdformat->format;
>> priv->cc[sdformat->pad] = cc;
>> +
>> + /* propagate format to source pad */
>> + if (sdformat->pad == VDIC_SINK_PAD_DIRECT ||
>> + sdformat->pad == VDIC_SINK_PAD_IDMAC) {
>> + outf->width = f->width;
>> + outf->height = f->height;
>> + outf->field = V4L2_FIELD_NONE;
>
> This is missing colorimetry, too.
>
> regards
> Philipp
>
Powered by blists - more mailing lists