linux-kernel - [PATCH 0/4] Add STM32H7 DAC driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 31 Mar 2017 13:45:03 +0200
From:   Fabrice Gasnier <fabrice.gasnier@...com>
To:     <jic23@...nel.org>, <linux@...linux.org.uk>, <robh+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <linux-iio@...r.kernel.org>, <mark.rutland@....com>,
        <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
        <lars@...afoo.de>, <knaack.h@....de>, <pmeerw@...erw.net>,
        <fabrice.gasnier@...com>, <benjamin.gaignard@...aro.org>,
        <benjamin.gaignard@...com>, <linus.walleij@...aro.org>,
        <amelie.delaunay@...com>
Subject: [PATCH 0/4] Add STM32H7 DAC driver

This patchset adds support for the STM32H7 DAC controller

It's a 12-bit, voltage output digital-to-analog converter. It has two
output channels, each with its own converter, trigger sources and
waveform generator.

Each channel can be used independently, so common resources are managed
in stm32-dac-core driver (e.g. clock, reset, regulator, registers).
One IIO device is instantiated per DAC output channel, in stm32-dac
driver, so each channel can have its own trigger.

Please find bellow basic examples, using this driver to:
- generate DC voltage output on channel1
- generate a triangle waveform on channel2

# set max DC voltage / enable / min DC voltage / disable on out1:
cd /sys/bus/iio/devices/iio\:device0
echo 4095 > out_voltage1_raw 
echo 1 > out_voltage1_en
echo 0 > out_voltage1_raw
echo 0 > out_voltage1_en

# configure timer trigger, and set triangle waveform with max
# amplitude on out2:
cd /sys/bus/iio/devices/trigger9
cat name
tim2_trgo
echo 10000 > sampling_frequency

cd /sys/bus/iio/devices/iio\:device1
echo triangle > wave
echo 11 > mamp
echo tim2_trgo > trigger/current_trigger
echo 1 > out_voltage2_en

Fabrice Gasnier (4):
  dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  iio: dac: add support for stm32 DAC
  iio: dac: stm32: add support for trigger events
  iio: dac: stm32: add support for waveform generator

 Documentation/ABI/testing/sysfs-bus-iio-dac-stm32  |  32 ++
 .../devicetree/bindings/iio/dac/st,stm32-dac.txt   |  56 +++
 drivers/iio/dac/Kconfig                            |  18 +
 drivers/iio/dac/Makefile                           |   2 +
 drivers/iio/dac/stm32-dac-core.c                   | 180 +++++++
 drivers/iio/dac/stm32-dac-core.h                   |  63 +++
 drivers/iio/dac/stm32-dac.c                        | 538 +++++++++++++++++++++
 7 files changed, 889 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dac-stm32
 create mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
 create mode 100644 drivers/iio/dac/stm32-dac-core.c
 create mode 100644 drivers/iio/dac/stm32-dac-core.h
 create mode 100644 drivers/iio/dac/stm32-dac.c

-- 
1.9.1