linux-kernel - RE: [PATCH] ACPI: SPCR: Use access width to determine mmio usage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 5 May 2017 03:09:34 +0000
From:   "Zheng, Lv" <lv.zheng@...el.com>
To:     Jon Mason <jon.mason@...adcom.com>,
        Rafael Wysocki <rjw@...ysocki.net>,
        Len Brown <lenb@...nel.org>,
        "Moore, Robert" <robert.moore@...el.com>
CC:     "linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "devel@...ica.org" <devel@...ica.org>,
        "bcm-kernel-feedback-list@...adcom.com" 
        <bcm-kernel-feedback-list@...adcom.com>
Subject: RE: [PATCH] ACPI: SPCR: Use access width to determine mmio usage

Hi,

> From: Jon Mason [mailto:jon.mason@...adcom.com]
> Sent: Thursday, May 4, 2017 11:06 PM
> Subject: [PATCH] ACPI: SPCR: Use access width to determine mmio usage
> 
> The current SPCR code does not check the access width of the mmio, and
> uses a default of 8bit register accesses.  This prevents devices that
> only do 16 or 32bit register accesses from working.  By simply checking
> this field and setting the mmio string appropriately, this issue can be
> corrected.  To prevent any legacy issues, the code will default to 8bit
> accesses if the value is anything but 16 or 32.
> 
> Signed-off-by: Jon Mason <jon.mason@...adcom.com>
> ---
>  drivers/acpi/spcr.c     | 18 ++++++++++++++++--
>  include/acpi/acrestyp.h |  7 +++++++
>  2 files changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> index 01c9466..11233f6 100644
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@ -74,8 +74,22 @@ int __init parse_spcr(bool earlycon)
>  		goto done;
>  	}
> 
> -	iotype = table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY ?
> -			"mmio" : "io";
> +	if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> +		switch (table->serial_port.access_width) {
> +		default:
> +			pr_err("Unexpected SPCR Access Width.  Defaulting to byte size\n");
> +		case ACPI_ACCESS_SIZE_BYTE:
> +			iotype = "mmio";
> +			break;
> +		case ACPI_ACCESS_SIZE_WORD:
> +			iotype = "mmio16";
> +			break;
> +		case ACPI_ACCESS_SIZE_DWORD:
> +			iotype = "mmio32";
> +			break;
> +		}
> +	} else
> +		iotype = "io";
> 
>  	switch (table->interface_type) {
>  	case ACPI_DBG2_ARM_SBSA_32BIT:
> diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h
> index f0f7403..781cb55 100644
> --- a/include/acpi/acrestyp.h
> +++ b/include/acpi/acrestyp.h
> @@ -372,6 +372,13 @@ struct acpi_resource_generic_register {
>  	u64 address;
>  };
> 
> +/* Generic Address Space Access Sizes */
> +#define ACPI_ACCESS_SIZE_UNDEFINED		0
> +#define ACPI_ACCESS_SIZE_BYTE			1
> +#define ACPI_ACCESS_SIZE_WORD			2
> +#define ACPI_ACCESS_SIZE_DWORD			3
> +#define ACPI_ACCESS_SIZE_QWORD			4
> +
>  struct acpi_resource_gpio {
>  	u8 revision_id;
>  	u8 connection_type;

Please don't define this.
It's possible to calculate 8/16/32/64 from the access width value.
Try:
1 << (access_width + 2）

Thanks
Lv