lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 May 2017 19:48:20 -0500 From: Rob Herring <robh@...nel.org> To: Guodong Xu <guodong.xu@...aro.org> Cc: xuwei5@...ilicon.com, catalin.marinas@....com, will.deacon@....com, wangkefeng.wang@...wei.com, puck.chen@...ilicon.com, xuejiancheng@...ilicon.com, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org Subject: Re: [PATCH 12/12] arm64: dts: hikey960: add LED nodes On Wed, May 17, 2017 at 04:37:45PM +0800, Guodong Xu wrote: > HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT > respectively. > > All of them are implemented as GPIO. > > Signed-off-by: Guodong Xu <guodong.xu@...aro.org> > --- > arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 48 +++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts > index 6de86c0..4839885 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts > @@ -48,6 +48,54 @@ > linux,code = <KEY_POWER>; > }; > }; > + > + leds { This too should move out of the soc node. > + compatible = "gpio-leds"; > + status = "disabled"; > + user_led1 { > + label = "user_led1"; > + /* gpio_150_user_led1 */ > + gpios = <&gpio18 6 0>; > + linux,default-trigger = "heartbeat"; > + }; > + > + user_led2 { > + label = "user_led2"; > + /* gpio_151_user_led2 */ > + gpios = <&gpio18 7 0>; > + linux,default-trigger = "mmc0"; > + }; > + > + user_led3 { > + label = "user_led3"; > + /* gpio_189_user_led3 */ > + gpios = <&gpio23 5 0>; > + default-state = "off"; > + }; > + > + user_led4 { > + label = "user_led4"; > + /* gpio_190_user_led4 */ > + gpios = <&gpio23 6 0>; > + linux,default-trigger = "cpu0"; > + }; > + > + wlan_active_led { > + label = "wifi_active"; > + /* gpio_205_wifi_active */ > + gpios = <&gpio25 5 0>; > + linux,default-trigger = "phy0tx"; > + default-state = "off"; > + }; > + > + bt_active_led { > + label = "bt_active"; > + gpios = <&gpio25 7 0>; > + /* gpio_207_user_led1 */ > + linux,default-trigger = "hci0rx"; > + default-state = "off"; > + }; > + }; > }; > }; > > -- > 2.10.2 >
Powered by blists - more mailing lists