Date:   Tue,  6 Jun 2017 15:24:52 +0300
From:   Mika Westerberg <mika.westerberg@...ux.intel.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Andreas Noever <andreas.noever@...il.com>,
        Michael Jamet <michael.jamet@...el.com>,
        Yehezkel Bernat <yehezkel.bernat@...el.com>,
        Lukas Wunner <lukas@...ner.de>,
        Amir Levy <amir.jer.levy@...el.com>,
        Andy Lutomirski <luto@...nel.org>, Mario.Limonciello@...l.com,
        Jared.Dominguez@...l.com,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v4 00/27] Thunderbolt security levels and NVM firmware upgrade

Hi,

This is fourth version of the patch series adding support for Thunderbolt
security levels and NVM firmware upgrade. PCs running Intel Falcon Ridge or
newer need these in order to connect devices if the security level is set
to "user(SL1) or secure(SL2)" from BIOS.

The security levels were added to to prevent DMA attacks when PCIe is
tunneled over Thunderbolt fabric where IOMMU is not available or cannot be
enabled for different reasons.

This series converts the Thunderbolt driver to a Linux bus and makes each
Thunderbolt device (aka Thunderbolt switch or router or endpoint) a Linux
device which is connected to that bus addressed by their routing string
(this is the addressing Thunderbolt uses).

With these patches the user can authorize devices using sysfs attributes
like (following USB):

  # echo 1 > /sys/bus/thunderbolt/devices/0-1/authorized

If the BIOS security level is set to "secure" and the device supports
secure connect on the first connect the device is uploaded a random key:

  # key=$(openssl rand -hex 32)
  # echo $key > /sys/bus/thunderbolt/devices/0-1/key
  # echo 1 > /sys/bus/thunderbolt/devices/0-1/authorized

Next time the device is plugged in the user can verify (challenge) the
device using the same key:

  # echo $key > /sys/bus/thunderbolt/devices/0-1/key
  # echo 2 > /sys/bus/thunderbolt/devices/0-1/authorized

The device identification information is found below each device sysfs
node and includes following attributes:

  device	- Device ID
  device_name	- Name of the device
  vendor	- Vendor ID
  vendor_name	- Name of the vendor
  unique_id	- Unique ID string identifying this particular device

In addition these patches add support for upgrading NVM firmware running on
a host or device by running something like:

  # dd if=KYK_TBT_FW_0018.bin of=/sys/bus/thunderbolt/devices/0-0/nvm_non_active0/nvmem
  # echo 1 > /sys/bus/thunderbolt/devices/0-0/nvm_authenticate

More information how to use the Thunderbolt bus can be found in patch [26/27].

Where Internal Connection Manager (ICM) firmware is available and usable,
we use it in the driver. This also includes newer Apple Macbooks with
Alpine Ridge. For older Macbooks the driver works as before but in addition
the Thunderbolt bus is available there as well (including possibility to
upgrade NVM firmware of connected devices).

Note for Macs the Linux native PCIe hotplug support does not work well with
the Thunderbolt PCIe topologies where there is need to put all available
resources to the PCIe downstream port where the PCIe chain is extended.
This is something we need to fix. In the mean time is a way to work it
around by passing "pci=hpbussize=10,hpmemsize=2M" or so to the kernel
command line.

We are currently porting Amir's network driver on top of the Thunderbolt
bus.

The previous version (v3) of the series can be found in:

   https://lwn.net/Articles/724465/

Changes from v3:
  - Rename tb_switch_find_vsec_cap() to tb_switch_find_vse_cap() to
    be consistent with PCI where VSEC stands for Vendor Specific
    Extended Capability.
  - Rename TB_VSEC_CAP_* to TB_VSE_CAP accordingly.
  - Add missing call to mutex_destroy() for tb->lock
  - Disable host NVM upgrade when in native mode
  - Add SoB from Andreas

Greg, I did not add your ack for the two patches (9 and 26) you acked
because I think you are going to add your SoB to the series anyway when you
apply the series. Let me know if you want me to add them. Thanks.

Lukas Wunner (1):
  thunderbolt: Refactor and fix parsing of port drom entries

Mika Westerberg (26):
  thunderbolt: Use const buffer pointer in write operations
  thunderbolt: No need to read UID of the root switch on resume
  thunderbolt: Do not try to read UID if DROM offset is read as 0
  thunderbolt: Do not warn about newer DROM versions
  thunderbolt: Add MSI-X support
  thunderbolt: Rework capability handling
  thunderbolt: Allow passing NULL to tb_ctl_free()
  thunderbolt: Introduce thunderbolt bus and connection manager
  thunderbolt: Convert switch to a device
  thunderbolt: Fail switch adding operation if reading DROM fails
  thunderbolt: Do not fail if DROM data CRC32 is invalid
  thunderbolt: Read vendor and device name from DROM
  thunderbolt: Move control channel messages to tb_msgs.h
  thunderbolt: Expose get_route() to other files
  thunderbolt: Expose make_header() to other files
  thunderbolt: Let the connection manager handle all notifications
  thunderbolt: Rework control channel to be more reliable
  thunderbolt: Add new Thunderbolt PCI IDs
  thunderbolt: Add support for NHI mailbox
  thunderbolt: Store Thunderbolt generation in the switch structure
  thunderbolt: Add support for DMA configuration based mailbox
  thunderbolt: Do not touch the hardware if the NHI is gone on resume
  thunderbolt: Add support for Internal Connection Manager (ICM)
  thunderbolt: Add support for host and device NVM firmware upgrade
  thunderbolt: Add documentation how Thunderbolt bus can be used
  MAINTAINERS: Add maintainers for Thunderbolt driver

 Documentation/ABI/testing/sysfs-bus-thunderbolt |  110 +++
 Documentation/admin-guide/index.rst             |    1 +
 Documentation/admin-guide/thunderbolt.rst       |  199 ++++
 MAINTAINERS                                     |    3 +
 drivers/thunderbolt/Kconfig                     |   13 +-
 drivers/thunderbolt/Makefile                    |    2 +-
 drivers/thunderbolt/cap.c                       |  169 ++--
 drivers/thunderbolt/ctl.c                       |  665 +++++++++----
 drivers/thunderbolt/ctl.h                       |  105 +-
 drivers/thunderbolt/dma_port.c                  |  524 ++++++++++
 drivers/thunderbolt/dma_port.h                  |   34 +
 drivers/thunderbolt/domain.c                    |  456 +++++++++
 drivers/thunderbolt/eeprom.c                    |  119 ++-
 drivers/thunderbolt/icm.c                       | 1089 +++++++++++++++++++++
 drivers/thunderbolt/nhi.c                       |  306 +++++-
 drivers/thunderbolt/nhi.h                       |   93 +-
 drivers/thunderbolt/nhi_regs.h                  |   27 +
 drivers/thunderbolt/switch.c                    | 1178 +++++++++++++++++++++--
 drivers/thunderbolt/tb.c                        |  240 +++--
 drivers/thunderbolt/tb.h                        |  251 ++++-
 drivers/thunderbolt/tb_msgs.h                   |  260 +++++
 drivers/thunderbolt/tb_regs.h                   |   50 +-
 drivers/thunderbolt/tunnel_pci.c                |   17 +-
 23 files changed, 5329 insertions(+), 582 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-thunderbolt
 create mode 100644 Documentation/admin-guide/thunderbolt.rst
 create mode 100644 drivers/thunderbolt/dma_port.c
 create mode 100644 drivers/thunderbolt/dma_port.h
 create mode 100644 drivers/thunderbolt/domain.c
 create mode 100644 drivers/thunderbolt/icm.c
 create mode 100644 drivers/thunderbolt/tb_msgs.h

-- 
2.11.0

Powered by blists - more mailing lists