| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 7 Jun 2017 11:34:05 -0700
From: Steve Longerbeam <slongerbeam@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
kernel@...gutronix.de, fabio.estevam@....com,
linux@...linux.org.uk, mchehab@...nel.org, hverkuil@...all.nl,
nick@...anahar.org, markus.heiser@...marIT.de,
p.zabel@...gutronix.de, laurent.pinchart+renesas@...asonboard.com,
bparrot@...com, geert@...ux-m68k.org, arnd@...db.de,
sudipm.mukherjee@...il.com, minghsiu.tsai@...iatek.com,
tiffany.lin@...iatek.com, jean-christophe.trotin@...com,
horms+renesas@...ge.net.au, niklas.soderlund+renesas@...natech.se,
robert.jarzmik@...e.fr, songjun.wu@...rochip.com,
andrew-ct.chen@...iatek.com, gregkh@...uxfoundation.org,
shuah@...nel.org, sakari.ailus@...ux.intel.com, pavel@....cz
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org,
devel@...verdev.osuosl.org,
Russell King <rmk+kernel@...linux.org.uk>,
Steve Longerbeam <steve_longerbeam@...tor.com>
Subject: [PATCH v8 26/34] media: imx: csi: add support for bayer formats
From: Russell King <rmk+kernel@...linux.org.uk>
Bayer formats must be treated as generic data and passthrough mode must
be used. Add the correct setup for these formats.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
- added check to csi_link_validate() to verify that destination is
IDMAC output pad when passthrough conditions exist: bayer formats
and 16-bit parallel buses.
Signed-off-by: Steve Longerbeam <steve_longerbeam@...tor.com>
---
drivers/staging/media/imx/imx-media-csi.c | 74 ++++++++++++++++++++++++-------
1 file changed, 57 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 4ff2419..83c8697 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -287,10 +287,11 @@ static int csi_idmac_setup_channel(struct csi_priv *priv)
struct imx_media_video_dev *vdev = priv->vdev;
struct v4l2_fwnode_endpoint *sensor_ep;
struct v4l2_mbus_framefmt *infmt;
- unsigned int burst_size;
struct ipu_image image;
+ u32 passthrough_bits;
dma_addr_t phys[2];
bool passthrough;
+ u32 burst_size;
int ret;
infmt = &priv->format_mbus[CSI_SINK_PAD];
@@ -308,24 +309,52 @@ static int csi_idmac_setup_channel(struct csi_priv *priv)
image.phys0 = phys[0];
image.phys1 = phys[1];
- ret = ipu_cpmem_set_image(priv->idmac_ch, &image);
- if (ret)
- goto unsetup_vb2;
-
- burst_size = (image.pix.width & 0xf) ? 8 : 16;
-
- ipu_cpmem_set_burstsize(priv->idmac_ch, burst_size);
-
/*
- * If the sensor uses 16-bit parallel CSI bus, we must handle
- * the data internally in the IPU as 16-bit generic, aka
- * passthrough mode.
+ * Check for conditions that require the IPU to handle the
+ * data internally as generic data, aka passthrough mode:
+ * - raw bayer formats
+ * - the sensor bus is 16-bit parallel
*/
- passthrough = (sensor_ep->bus_type != V4L2_MBUS_CSI2 &&
- sensor_ep->bus.parallel.bus_width >= 16);
+ switch (image.pix.pixelformat) {
+ case V4L2_PIX_FMT_SBGGR8:
+ case V4L2_PIX_FMT_SGBRG8:
+ case V4L2_PIX_FMT_SGRBG8:
+ case V4L2_PIX_FMT_SRGGB8:
+ burst_size = 8;
+ passthrough = true;
+ passthrough_bits = 8;
+ break;
+ case V4L2_PIX_FMT_SBGGR16:
+ case V4L2_PIX_FMT_SGBRG16:
+ case V4L2_PIX_FMT_SGRBG16:
+ case V4L2_PIX_FMT_SRGGB16:
+ burst_size = 4;
+ passthrough = true;
+ passthrough_bits = 16;
+ break;
+ default:
+ burst_size = (image.pix.width & 0xf) ? 8 : 16;
+ passthrough = (sensor_ep->bus_type != V4L2_MBUS_CSI2 &&
+ sensor_ep->bus.parallel.bus_width >= 16);
+ passthrough_bits = 16;
+ break;
+ }
- if (passthrough)
- ipu_cpmem_set_format_passthrough(priv->idmac_ch, 16);
+ if (passthrough) {
+ ipu_cpmem_set_resolution(priv->idmac_ch, image.rect.width,
+ image.rect.height);
+ ipu_cpmem_set_stride(priv->idmac_ch, image.pix.bytesperline);
+ ipu_cpmem_set_buffer(priv->idmac_ch, 0, image.phys0);
+ ipu_cpmem_set_buffer(priv->idmac_ch, 1, image.phys1);
+ ipu_cpmem_set_format_passthrough(priv->idmac_ch,
+ passthrough_bits);
+ } else {
+ ret = ipu_cpmem_set_image(priv->idmac_ch, &image);
+ if (ret)
+ goto unsetup_vb2;
+ }
+
+ ipu_cpmem_set_burstsize(priv->idmac_ch, burst_size);
/*
* Set the channel for the direct CSI-->memory via SMFC
@@ -799,6 +828,7 @@ static int csi_link_validate(struct v4l2_subdev *sd,
{
struct csi_priv *priv = v4l2_get_subdevdata(sd);
struct v4l2_fwnode_endpoint *sensor_ep;
+ const struct imx_media_pixfmt *incc;
struct imx_media_subdev *sensor;
bool is_csi2;
int ret;
@@ -819,6 +849,16 @@ static int csi_link_validate(struct v4l2_subdev *sd,
priv->sensor = sensor;
sensor_ep = &priv->sensor->sensor_ep;
is_csi2 = (sensor_ep->bus_type == V4L2_MBUS_CSI2);
+ incc = priv->cc[CSI_SINK_PAD];
+
+ if (priv->dest != IPU_CSI_DEST_IDMAC &&
+ (incc->bayer || (!is_csi2 &&
+ sensor_ep->bus.parallel.bus_width >= 16))) {
+ v4l2_err(&priv->sd,
+ "bayer/16-bit parallel buses must go to IDMAC pad\n");
+ ret = -EINVAL;
+ goto out;
+ }
if (is_csi2) {
int vc_num = 0;
@@ -843,7 +883,7 @@ static int csi_link_validate(struct v4l2_subdev *sd,
/* select either parallel or MIPI-CSI2 as input to CSI */
ipu_set_csi_src_mux(priv->ipu, priv->csi_id, is_csi2);
-
+out:
mutex_unlock(&priv->lock);
return ret;
}
--
2.7.4
Powered by blists - more mailing lists